Electric locks - Import export

KFE Special customer requirements Applications Overview Presses Machine Tools Automatization + Feeders Lifting Gear + Mobile Hydraulics Production Technology Special Machinery CAD Download Contact Electric Locking Unit The electric Locking Unit KFE is used as a stepless locking device on round rods and holds axial forces in both load directions without axial play. It is used where hydraulic or pneumatic solutions are not possible. The holding force is created by the proven spring-operated clamping system as it is used in SITEMA’s hydraulically or pneumatically operated Locking Units. At a drop of the control voltage or in case of failure of the electric supply, the Locking Unit KFE clamps automatically. Therefore, it is also suitable for use in safety relevant applications. To operate the Locking Unit KFE, a supply voltage of 24 V and a control signal for the input command “clamp/release” are sufficient. The Locking Unit is self-monitoring and provides output signals...

KRM Electric Locking Unit KFE Special customer requirements Applications Overview Presses Machine Tools Automatization + Feeders Lifting Gear + Mobile Hydraulics Production Technology Special Machinery CAD Download Contact Mechanical Safety Catcher The Mechanical Safety Catcher KRM is operated purely mechanically and requires neither a hydraulic nor a pneumatic system for control. The clamping head is kept open mechanically and acts upon rupture of the suspension (rope, belt, chain, etc.). The energy of the falling mass is then used to generate the clamping force. In applications where lifted loads can be dangerous in case of rupture of the suspension device, Safety Catchers KRM are used to protect people and assure accident prevention. Safety Catchers KRM secure the load at any point of the stroke in a mechanically safe and absolutely reliable way. Due to the principle of self-reinforcing clamping, a very high level of safety is reached. Application example Packing...

Mechanical Safety Catcher KRM Electric Locking Unit KFE Special customer requirements Applications Overview Presses Machine Tools Automatization + Feeders Lifting Gear + Mobile Hydraulics Production Technology Special Machinery CAD Download Contact Auto Bleeder The SITEMA Auto Bleeder has been specially designed for the use with a SITEMA clamping head. It makes sure that the hydraulic system is constantly bled. Air bubbles in the hydraulic fluid might combust spontaneously under certain conditions (so-called Diesel effect). As a consequence, seals and sealing surfaces can be damaged, causing leakages. Clamping heads are especially susceptible for this phenomenon, as they have only a very small hydraulic volume and are not flushed through at each activation. Air can therefore easily accumulate in the clamping head. This is the reason why the usual initial bleeding at commissioning is often not enough, especially when the line leading to the clamping head points upwards...

Rod leaving clamping head Auto Bleeder Mechanical Safety Catcher KRM Electric Locking Unit KFE Special customer requirements Applications Overview Presses Machine Tools Automatization + Feeders Lifting Gear + Mobile Hydraulics Production Technology Special Machinery CAD Download Contact Mechanical Valve Actuator MVA Secure the rupture of a chain with the full comfort of a pneumatic SITEMA clamping head When a load has to be secured against rupture of a suspension device (e.g. a chain), many customers use our Mechanical Safety Catcher KRM. This unit has the advantage to hold the load immediately upon rupture of the suspension device. Additional sensors to detect rupture of a chain are not necessary. On the other hand, it is not possible to activate the KRM in a user-defined position without rupture of the suspension device, e.g. for maintenance purposes. Here, the Mechanical Valve Actuator MVA comes to your rescue. It is simply put between the suspension device and the...

Mechanical Valve Actuator MVA Rod leaving clamping head Auto Bleeder Mechanical Safety Catcher KRM Electric Locking Unit KFE Special customer requirements Applications Overview Presses Machine Tools Automatization + Feeders Lifting Gear + Mobile Hydraulics Production Technology Special Machinery CAD Download Contact Electropneumatic module EPM The Electropneumatic Module EPM acts as interface between (electrical) power supply / control and a pneumatic SITEMA clamping head. All pneumatic SITEMA clamping heads with an operating pressure of up to 4 bar and an operating volume of up to 220 cm³ can be pneumatically controlled by the EPM. It is also possible to operate several clamping heads in parallel with one EPM. The EPM is controlled by a 24V supply and switching voltage. The outlet pressure which is required to open or keep open a pneumatic clamping head is controlled by a control signal. If the voltage fails or the input signal is switched off, the pressure is...

NSPV PVC Converting Adaptor C/W Lock Rings Features: AS/NZS 2053.2:2001 standard; High flow capacity; Corrosion resistant; Lightweight, easy to install.

Main features • Short mixing time • Extremely high mixing quality • Batches with repeatable and scalable results • Mixing ratio 1/100.000 • Coefficient of variation (CV): ≤ 3 % • Low maintenance • Functional design for installation in R&D area Techanical features • Batch size: 1,4 / 3 / 7 / 20 liters (net) • Cylindrical mixing chamber • MIxing tools: ploughshare / ploughshare with toothed design / Mix Paddle / Mix Paddle with toothed design • Material of costruction: AISI 304 / AISI 316 / AISI 316Ti • Discharge door with round profile, building the bottom side of the mixing chamber • Front side inspection door complete with safety electric lock • Electric control panel with inverter for speed variation of the main rotor shaft • Internal finishing with roughness Ra 0.5-0.8 µm

Main features • Short mixing time • Extremely high mixing quality • Batches with repeatable results • Mixing ratio 1/100.000 • Coefficient of variation (CV): ≤ 3 % • Low maintenance Techanical features • Batch size: from 65 to 28.000 liters (net) • Cylindrical mixing chamber • MIxing tools: ploughshare / ploughshare with toothed design / Mix Paddle / Mix Paddle with toothed design • Material of costruction: carbon steel / Hardox 450 / AISI 304 / AISI 316 / AISI 316Ti • Inspection door complete with safety electric lock • Discharge door with round profile, building the bottom side of the mixing chamber • Rotor shaft with turned and coaxial ends • Rotor shaft sealing system with packing seals and wear resistant ferrules to protect the rotor shaft, prepared for flushing with air / nitrogen

Main features • Mixing times adaptable to the specific process • Extremely high mixing quality • Constant quality of the product output • Mixing ratio 1/100.000 • Coefficient of variation (CV): ≤ 3 % • Low maintenance Techanical features • Hourly productivity: from 500 to 1.200.000 liters/h • Cylindrical mixing chamber • MIxing tools: ploughshare / ploughshare with toothed design / Mix Paddle / Mix Paddle with toothed design • Material of costruction: carbon steel / Hardox 450 / AISI 304 / AISI 316 / AISI 316Ti • Inspection door complete with safety electric lock • Vertical discharge door with adjustable internal diaphgrams to regulate the production capacity • Rotor shaft with turned and coaxial ends • Rotor shaft sealing system with packing seals and wear resistant ferrules to protect the rotor shaft, prepared for flushing with air / nitrogen

Main features • Management of the process time and temperature through the heat exchanger • Short mixing time • Extremely high mixing quality • Batches with repeatable results • Mixing ratio 1/100.000 • Coefficient of variation (CV): ≤ 3 % • Low maintenance Techanical features • Batch size: from 65 to 28.000 liters (net) • Cylindrical mixing chamber • MIxing tools: ploughshare / ploughshare with toothed design / Mix Paddle / Mix Paddle with toothed design • Material of costruction: carbon steel / Hardox 450 / AISI 304 / AISI 316 / AISI 316Ti • Inspection door complete with safety electric lock • Discharge door with round profile, building the bottom side of the mixing chamber • Rotor shaft with turned and coaxial ends • Rotor shaft sealing system with packing seals and wear resistant ferrules to protect the rotor shaft, prepared for flushing with air / nitrogen • Heat exchanger on mixing chamber for heating / cooling processes

Main features • Short mixing time • Extremely high mixing quality • Batches with repeatable results • Mixing ratio 1/100.000 • Coefficient of variation (CV): ≤ 3 % • Low maintenance • Easy deep cleaning Techanical features • Batch size: from 65 to 28.000 liters (net) • Cylindrical mixing chamber • MIxing tools: ploughshare / ploughshare with toothed design / Mix Paddle / Mix Paddle with toothed design • Material of costruction: carbon steel / Hardox 450 / AISI 304 / AISI 316 / AISI 316Ti • Full access to mixing chamber through the extractable rotor shaft • Inspection door complete with safety electric lock • Discharge door with round profile, building the bottom side of the mixing chamber • Rotor shaft with turned and coaxial ends • Rotor shaft sealing system with packing seals and wear resistant ferrules to protect the rotor shaft, prepared for flushing with air / nitrogen

Electric cylinders are self-locking. So they do not need energy when they stand still. This makes the electric cylinders to be an interesting alternative to pneumatic and hydraulic actuators. Powerful DC motors, signal lines, potentiometers and Hall-ICs for position indication, as well as integrated end switches uncomplicatedly serve for meeting the most frequent requirements.

We look to offer solutions that are more creative, more engaging, more cost-effective, economical, built to last and more environmentally conscious. From design, quality-controlled factory floor to your door, Prefabex has the capability to meet your time and budget constraints and accurately deliver on project specifications for your Prefabricated WC and shower building needs. Prefabex modular buildings Make powerful Impression wherever they are deployed. The prefabricated toilet and shower building solution is ideal for the Sports complexes, entertainment event, Mining industry facilities, education facilities, hospitals, healthcare, holiday parks, festival and construction industries. Our Prefabricated toilet and shower range from Prefabex are available with flexible options and each building type is customized to suit specific end use, with features such as electrical connection, water supply, secure locking and appropriate fit out.

The GEMÜ 610 2/2-way diaphragm valve has a low maintenance plastic piston actuator and is pneumatically operated. An integral optical position indicator is standard. Normally Closed (NC), Normally Open (NO) and Double Acting (DA) control functions are available. —Same mounting height planes over multiple nominal sizes —Compact plant design due to flow optimised valve bodies —Integral optical position indicator and seal adjuster as standard —Option with electrical position indicator and / or lock out device

Manufacturer of electric motors including brushless DC motors. Used in electric tools, home, automotive, medical, printing, and computer applications. Motors can be customized. voltage 18v 24v rated speed 3400 5200 RPM rated torque 61.47 78.63 mNm output 21.97 42.92 W EFF 82 76 %

Low speed laboratory centrifuge OK5A is widely used in the filed of biochemistry,biological products,pharmaceutical factory and laboratory. OK5A Feature: 1.Micro computer control,stable operation. LED or LCD display to easily read each data and alarm information. The parameters can be changed during operation. The digital display which indicate the speed, time, RCF in operation, speed raising and reducing quick, operate simply.  2.DC brushless motor drive, low noise and high speed accuracy. 3.10 kinds of accelerating and decelerating speed for choice. 4.Three sets of damping. Customized high-quality NR rubber shock absorption prevents sample resuspension to reach best centrifugal effect 5.Electric lid lock for safe operation

Automatic Systems swing gate PMD is used in conjunction with the PNG security entrance lanes. With he similarity of design allows for an aesthetically-pleasing uniformity when installed together with the PNG. It provides a wider walkway for the evacuation of buildings in the event of an emergency and/or for people with reduced mobility and for services personnel. The PMD 337 is a motorized gate, with brushed stainless steel housing with the same length as the PNG 382, PNG 392 and PNG 392 Twin. Security Mechanical and electric locking in the closed position prevents fraudulent entry Audible and visual alarms Safety Automatic opening in the event of an emergency Safety photocells Modularity Multiple configurations for passage management (free, controlled, mono- or bi-directional...) Easy integration with any type of identification or authorization system Stand-alone installation facing a wall, railing or other type of obstacle Installation for independent or simultaneous...

Automatic Systems swing gate PMD range is used in conjunction with the PNG security entrance lanes. With he similarity of design allows for an aesthetically-pleasing uniformity when installed together with the PNG. It provides a wider walkway for the evacuation of buildings in the event of an emergency and/or for people with reduced mobility and for services personnel. The PMD 336 is a motorized gate, with a brushed stainless steel housing the same length as the PNG 381, PNG 391 and PNG 391 Twin. Security Mechanical and electric locking in the closed position prevents fraudulent entry Audible and visual alarms Safety Automatic opening in the event of an emergency Safety photocells Modularity Multiple configurations for passage management (free, controlled, mono- or bi-directional...) Easy integration with any type of identification or authorization system Stand-alone installation facing a wall, railing or other type of obstacle Installation for independent or simultaneous...

SIM Automation, your partner in - autonomous driving - electromobility - connected car - electric pumps - operating elements - door locks - instruments - airbag inflators and igniters - gearboxes Development of part-feeding systems and test systems. Assembly and inspections lines that we've already developed: - Airbag inflators - Intercoolers - Oil pumps - Door and trunk locks - Instrument components - Vehicle components for driver assistance systems - Step motors and servo motors - Quick-release clutch systems - Gearbox balance shafts (for checking run-out accuracy and backlash) Assembly lines we have been involved in: - Lighting components (H7 / Xenon / LED) - Safety belt height adjuster - Heatable windscreen washer jets Testing and inspection lines we have been involved in: - Electric high-performance gear components (up to 6 kV) - Electric central locking systems (vehicles)

Small parts in large quantities? Electrical engineering in particular requires very quick machines. Electrical engineering is also becoming increasingly important in IT, with particularly small components required here. The machines from SIM Automation GmbH can detect even the smallest deviations of mere millimeters during sorting. We have produced assembly and testing lines for the following components in electrical engineering (extract): - Instrument components - Step motors and servo motors - Quick-release clutch systems - Gearbox balance shafts (for checking run-out accuracy and backlash) Assembly lines: - Plug contacts (vehicle electrical systems) - Industrial sockets and switches - Sockets / light switches - Electric heater control valves - Electric razors - Electric toothbrushes Testing and inspection: - Electric high-performance gear components (up to 6 kV) - Electric central locking systems (vehicles)

The product portfolio at SIM Automation ranges from the effective design of individual manual workstations all the way through to completely interlinked, highly automated process lines. We handle all common transfer systems and can thus offer solutions that are independent from the branches of our customers. In addition to all standardized joining, measuring, testing and inspection systems, our assembly plants can also implement the customer’s own processes, including: - Joining, screwing, bonding, riveting, welding (laser, ultrasonic, resistance) - Testing, measuring, inspecting (optical, tactile, electrical, thermal) - Robot systems - Linear systems (pneumatic, electrical, mechanical) - Cam-controlled drives, linear and handling systems Testing and inspection lines we have been involved in: - Electric high-performance gear components (up to 6 kV) - Electric central locking systems (vehicles)

Bright Chrome Plated Zinc Alloy Handle,Padlock version available,Easy Installation,ROHS compliance

Nanometer painted Zinc Alloy housing,handle and insert,1P or 3P cam,Quick Open,Easy Installation,ROHS compliance

Black Powder Coated Zinc Alloy or PA6 Housing and Handle,90 degree handle rotation combines with rod latch to open or close,Easy Installation,ROHS compliance

Pocked Black Powder Coated Zinc Alloy Housing and Handle,90 degree handle rotation combines with rod latch to open or close,Easy Installation,ROHS compliance

Black Powder Coated Zinc Alloy Housing and Handle,with or without button,Quick Open,Easy Installation,ROHS compliance

NSBon-04 is a plastic handle with lock system. It is designed to lock an electrical enclosure using a unique lock system and reliable protection against acts of vandalism. In the equipment includes a plastic handle with lock cylinder insert, a lock No. 3524E and two keys. The installation of the NSBon-04 option is quick and easy without any mechanical modification of the door.