Electromagnets - Import export

Electromagnets 200, 500 and 950 kg with permanent magnet for cold loads Self-contained battery model. Operating Modes: Manual: Simple use with buttons to activate or deactivate magnetization. Automatic: Quick activation and deactivation of magnet without manual order, ideal for hard-to-reach areas (no need to control with pendant button to take or release the load). Flexibility: Equipped with 3 power levels, they allow for sheet metal depiling. Benefits: Since it is a permanent magnet electromagnet, the battery is only used during demagnetizations, which gives it a long autonomy. There is no risk that the load falls because it is an electromagnet with permanent magnet. They are equipped with a force sensor that prevents the release of the load if the load is not put on the ground (which naturally prevents dropping).

Professional electromagnetic induction cooking plates. Complete table-top appliances with glass-ceramic top and complete built-in appliances. They have many programmable functions such as choice of power on multiple levels, time and/or temperature setting which ensure personalized and simple professional use. Numerous functions and automatic safety devices such as overheat protection, fault detection, circuit protection sensor and high voltage protection ensure maximum operational safety and reliability.

Professional electromagnetic induction cooking plates. Complete table-top appliances with glass-ceramic top and complete built-in appliances. They have many programmable functions such as choice of power on multiple levels, time and/or temperature setting which ensure personalized and simple professional use. Numerous functions and automatic safety devices such as overheat protection, fault detection, circuit protection sensor and high voltage protection ensure maximum operational safety and reliability.

For lifting of ground parts, bulk material and for occasional sorting out of magnetizable parts. ERM are equipped with mounted switch and integrated rectifier, for direct connection to 230 V mains voltage. The field depth is approx. 80-120 mm. Not permitted for transporting solid workpieces in unprotected areas.

EHG electromagnetic holding rods are used in fixture construction, for gripper systems and for a wide variety of tasks in mechanical engineering. EHG holding rods consist of a screwed, two-part system, are double-coated and sealed to IP 65. Max. Operating temperature 60°C Standard voltage 24,48,110V DC Protection class IP 53 ED 100%

The use of pole reversal control devices to control lifting magnets makes it possible to adjust the magnetic field very precisely. Thus, the USGs can be continuously adjusted in holding force and perform a demagnetizing cycle when switched off, which ensures that all parts are released and unwanted residual magnetism in the workpiece is minimized. USG pole reversal control units can be controlled via potential-free contacts with machine controls or pushbuttons in the crane operation and provide feedback on their switching status. As an option, we can also supply manual control units and signal lamp sets to match the pole reversal control units.

For lifting of ground parts, bulk material and for occasional sorting out of magnetizable parts. ERM are equipped with mounted switch and integrated rectifier, for direct connection to 230 V mains voltage. The field depth is approx. 80-120 mm. Not permitted for transporting solid workpieces in unprotected areas.

FXE electro-permanent lifting magnets are equipped with on-board control technology for direct connection to mains voltage - the fast, user-friendly plug & play solution for loads from light to super heavy. Different pole types are available, depending on the material thickness and surface to be moved.

AMT&C LLC offers a manufacturing of various types of electromagnetic systems. Additionally to the electromagnet itself, we can supply power units, switching units, cooling system and software for the system operation under PC control.

AMT&C LLC carries out the FEM modelling and production, according to the customer’s technical requirements, of electromagnetic coils, coil systems, solenoids. Both uncooled and liquid-cooled systems can be designed and realized. We also offer fabrication and of measuring Helmholtz coils with a desired coil constant.

For reducing losses, in high-frequency or pulse-field applications, electromagnetic coils can be designed using dielectric materials for their frames. Also the winding can be made of multi-strand high-frequency cable.

Electromagnetic system with a high field uniformity in the working volume ~ 1 cm3. It can be used for calibration of different types of magnetometers. Low power consumption allows continuous operation without cooling in the field range of ± 50 mT. The system can be controlled by a computer. Basic technical parameters: - overall dimensions - 280 × 340 × 340 mm; - net weight - ~ 95 kg; - maximal magnetic field induction - 50 mT; - the field inhomogeneity in the operating region - 0.01 - 0.05 %; - power consumption - ~ 200 W; - PC control mode, including the polarity reversal, is available.

AMT&C LLC offers a compact design of high power electromagnets with water cooling. It is possible to obtain the magnetic inductance up to 2 T, adjustable inter-polar gap, supplying in a set together with a computer-controlled power unit (including polarity reversal) optical channel along the field direction, and other options. We work according to the customer's specifications. The electromagnets presented, as an example, in the photo has the basic characteristics: - adjustable gap from 30 to 65 mm, - the maximum field in the gap of 35 mm-0.8 T, - the maximum field in the gap of 65 mm-0.5 T, - weight-95 kg - maximum power consumption-4.5 kW

Tesla is the UK's no. 1 manufacturer of electromagnets for particle accelerators. For more than 40 years, Tesla has supplied electromagnets to the World's high energy physics institutes, including Argonne, CERN, DESY, ESRF, Fermilab and Max Planck Institutes. Our team includes some of the most experienced magnet designers and builders in the World and It continues to lead the way with its contributions to the latest generation of accelerator projects and upgrades, including those at GANIL, Rutherford Appleton Laboratory, DESY, BNL, Trieste and CERN CLIC. Our reputation is based on our design and manufacturing capability, making us the UK's foremost manufacture of electromagnets for particle accelerators. ** Click for more **

Our valves are designed to control the flow rate of water in household and industrial appliances by opening or closing the passageways. We produce: Standard solenoid valves Bistable latching valves Direct acting valves Proportional valves - Patent Pending Our dedication to the valve for over 20 years has enabled us to provide customized high quality solutions - we take your concept and deliver high quality product. CHOOSE YOUR VALVE: Body: Single outlet:118/A118/B118/C118/D118/E118/F118/G118/H118/J118/L118/M109/A Double outlet:218/A218/B209/A Triple outlet:318/A Coil: 220-240V AC,110V AC,24V AC/DC,12V AC/DC Flow: 1 -2.5 -3 -3.8 -4 -5 -7 -8 -10 -12 L/min,optional Other specifications: Valve body material:Nylon reinforced with glass-fiber. Diaphragm material:EPDM, NBR, SILICONE or FPM. Solenoid:Encapsulated in waterproof material, self-extinguishing. Insulation class:CLASS H. Coil connectors:Tab 6,3 mm, Rast 2.5, Rast 5; coil position optional.

DESCRIPTION Circular electromagnet, heavy-duty and service cycle of 75% ED. Built of copper or aluminum coil, according to capacity requirements. Among the construction characteristics, it is worth mentioning: ·Heavy-duty monobloc carcass of moulded steel with high strength ribs and high mechanical strength ·Two protection shields of non magnetic steel ·Heavy-duty connection box ·Isolation class H ·Lugs with steel bushes to avoid wear ·Suspension chain of three ways of high strength alloy steel with a traditional eye bolt APPLICATIONS Aimed at meeting any handling need for ferrous materials: from small scrap yards to heavy duty steel industry. Due to their low weight and high mechanical strength they are ideal for hydraulic boom cranes in high performance applications. Adequate for underwater works following prior minimum service.

The electropermanent load lifting magnets from the EMPH series are suitable for the lifting and transportation of individual slabs and unprocessed blocks. These magnets are used to handle loads with a large air gap or with scaled surface. Only a 400V rated current must be provided to use these devices and they are then immediately ready for use. Through short electrical impulses within seconds, the EPMH from ASSFALG are automatically switched on or manually with the push of a button. No electricity flows during load transport and nevertheless, the workpiece is as securely clamped as with a permanent load lifting magnet. Through the impulse current control, the EPMH load lifting magnets do not use much energy. The effectiveness and efficiency can be seen on the one hand in the reduction of operating costs and on the other hand in a saving of time.

Electromagnetic clutches and brakes by Kendrion (Aerzen) transmit the torque and brake torque through dry running friction material. With DC voltage applied, the torque is transmitted without backlash. Using the prestressed spring of the armature, a release, free of residual torque is ensured. These clutches and brakes can be installed in any mounting position and hardly need any maintenance. Kendrion (Aerzen) offers standard clutches from 0.3 to 3.6 Nm as well as customer- and application-specific solutions up to 5 Nm.

The Active Clutch Line includes DC slip-ring-free single-disc clutches, in which the action of force of an electromagnetic field (electromagnetically closing) is used to transmit the torque. The clutches of the Active Clutch Line are characterized by a secure, residual moment-free lifting in any position and by a backlash-free transfer of the torque. Throughout their complete service life, they require little or no maintenance. Depending on the clutch version, higher switching capacities can be achieved.

The Active Brake Line includes DC single-disc brakes, in which the action of force of an electromagnetic field (electromagnetically closing) is used to generate the braking force. The Active Brake Line is characterized by a secure, residual moment-free lifting in any position, and by a backlash-free transfer of the braking torque. Throughout their complete service life, they require little or no maintenance.

Holding magnet for holding or clamping ferromagnetic workpieces. The DC-excited coil achieves a holding force of up to 30,000 N when energized. When the supply voltage is switched off, the workpiece to be held falls off. The holding solenoid is maintenance-free and are characterized by a low operating current at high holding forces.

Holding magnet for holding or clamping ferromagnetic workpieces. The DC-excited coil achieves a holding force of up to 30,000 N when energized. When the supply voltage is switched off, the workpiece to be held falls off. The holding solenoid is maintenance-free and are characterized by a low operating current at high holding forces.

Holding magnet for holding or clamping ferromagnetic workpieces. The DC-excited coil achieves a holding force of up to 30,000 N when energized. When the supply voltage is switched off, the workpiece to be held falls off. The holding solenoid is maintenance-free and are characterized by a low operating current at high holding forces.

Electromagnetic sealing jaw type MS...IP for welding and sealing bags: - From PE - From PP - From soft PVC or polyamide Features: This sealing jaw has: - Adjustable welding time - Adjustable cooling time - Adjustable cycle time The jaw is controlled by an electric foot pedal.

Incremental length probe with magnetic detection principle for high reliability. with USB interface. Very high accuracy and repeatability. Resolution 0,1µm or 0,5µm Extremely insensitive to contamination such as oil mist, moisture and dust Ball spline bearing of the spindle for long life time Perfectly suited for automated measured value acquisition in measuring devices, assembly and manufacturing lines. Basic measuring software included

Incremental length probe with magnetic operating principle Extremely insensitive to contamination such as oil mist, moisture and dust Due to the Ø 20mm clamping shaft extremely robust against oscillations and vibrations Perfectly suited for automated data acquisition in measuring fixtures, assembly and production lines

High precision incremental length probe with magnetic operating principle Extremely insensitive to contamination such as oil mist, moisture and dust Due to the Ø 20mm clamping shaft extremely robust against oscillations and vibrations Perfectly suited for automated data acquisition in measuring devices, assembly and production lines

High precision incremental length probe with magnetic operating principle Extremely insensitive to contamination such as oil mist, moisture and dust Due to the Ø 20mm clamping shaft extremely robust against oscillations and vibrations Perfectly suited for automated data acquisition in measuring devices, assembly and production lines

Incremental lengths probe with magnetic operating principle. Extremely insensitive to contamination such as oil mist, moisture and dust. Perfectly suited for automated measured value acquisition in measuring devices, assembly and manufacturing plants.