Electronic measurement systems - Import export

Read head for magnetic tape scale SL710/720/730 Pl101-R/RH: 1Vpp interface PL101-RA/RHA: TTL line driver interface (RS422) PL101-RM/RHM/RP/RHP/RY/RHY: with serial interface from Mitsubishi (M), Panasonic (P) or Yaskawa (Y) Max. Response speed: 6.4m/s with 1Vpp Max. Resolution: 0.2µm with TTL (phase to phase) Easy installation Protection class: IP67 (RH version), IP50 (R version) Resistant to oil, dirt, vibration and shock

Incremental length probe with magnetic operating principle Extremely insensitive to contamination such as oil mist, moisture and dust Due to the Ø 20mm clamping shaft extremely robust against oscillations and vibrations Perfectly suited for automated data acquisition in measuring fixtures, assembly and production lines

Incremental length probe with magnetic detection principle for high reliability. with USB interface. Very high accuracy and repeatability.. Resolution 0,1µm or 0,5µm. Extremely insensitive to contamination such as oil mist, moisture and dust. Ball spline bearing of the spindle for long life time. Perfectly suited for automated measured value acquisition in measuring devices, assembly and manufacturing lines. Basic measuring software for evaluation included.

High precision incremental length probe with magnetic operating principle Extremely insensitive to contamination such as oil mist, moisture and dust Due to the Ø 20mm clamping shaft extremely robust against oscillations and vibrations Perfectly suited for automated data acquisition in measuring devices, assembly and production lines

Incremental lengths probe with magnetic operating principle. Extremely insensitive to contamination such as oil mist, moisture and dust. Perfectly suited for automated measured value acquisition in measuring devices, assembly and manufacturing plants.

Incremental lengths probe with magnetic operating principle. Extremely insensitive to contamination such as oil mist, moisture and dust. Extremely robust against oscillations and vibrations due to the Ø 32mm clamping shaft. The probe pin (without spring) is fixed with a magnetic tip on the surface of the measuring object. This allows the change in position of the target to be detected with high accuracy. Perfect for position detection of machine axes.

E2 micro E-Chains® are very small, one-piece and two-piece (B07/B09) E-Chains® with a low weight and therefore ideal for highly dynamic applications. E2 micro E-Chains® are stable and available in many versions. igus® also offers numerous accessories and mounting options. "UPGrades" of the snap-open versions are available for many types; they are interchangeable among themselves and can thus be used as, among others, spare parts pack for new installation options. Other information Series 03 Inner height hi: 5 mm Inner widths Bi: 5 - 10 mm bending radii R: 10 - 28 mm Pitch: 10 mm E-Chain®, not-to-be-opened Series 04 Inner height hi: 7 mm Inner widths Bi: 7 - 30 mm bending radii R: 15 - 48 mm Pitch: 16,7 mm E-Chain®, not-to-be-opened Series 045 Inner height hi: 10,3 mm Inner widths Bi: 6 - 64 mm bending radii R: 18 - 38 mm Pitch: 13 mm E-Chain®, not-to-be-opened Series 05 Inner height hi: 10 mm Inner widths Bi: 6 - 64 mm bending radii R: 18 - 38 mm Pitch: 20 mm E-Chain®, not-to-be-opened Series 06 Inner height hi: 10,5 mm Inner widths Bi: 6 - 64 mm bending radii R: 18 - 38 mm Pitch: 20 mm E-Chain®, not-to-be-opened Series 08 Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 25 - 48 mm Pitch: 20 mm E-Chain®, not-to-be-opened Series B07 Inner height hi: 10,3 mm Inner widths Bi: 6 - 64 mm bending radii R: 18 - 38 mm Pitch: 20 mm E-Chain®, snap-open along the outer radius Series B09 Inner height hi: 14,3 mm Inner widths Bi: 16 - 40 mm bending radii R: 28 - 48 mm Pitch: 20 mm E-Chain®, snap-open along the outer radius Series 074 Inner height hi: 10.9 mm Inner widths Bi: 10 - 40 mm bending radii R: 18 - 38 mm Pitch: 20 mm E-Chain®, snap-open along the inner radius Series 094 Inner height hi: 14,3 mm Inner widths Bi: 10 - 40 mm bending radii R: 28 - 48 mm Pitch: 20 mm E-Chain®, snap-open along the inner radius Series E2.10, openable along the outside Inner height hi: 10 mm Inner widths Bi: 6 - 50 mm bending radii R: 10 - 38 mm Pitch: 20 mm e-chain®, snap-open outside Series E2i. 10, openable on the inside Inner height hi: 10 mm Inner widths Bi: 6 - 50 mm bending radii R: 10 - 38 mm Pitch: 20 mm e-chain®, snap-open inside Serie E2C. 10, closed Inner height hi: 10 mm Inner widths Bi: 6 - 50 mm bending radii R: 10 - 38 mm Pitch: 20 mm e-chain®, closed Series E2.15, openable along the outside Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 28 - 48 mm Pitch: 20 mm e-chain®, snap-open outside Series E2i. 15, openable on the inside Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 28 - 48 mm Pitch: 20 mm e-chain®, snap-open inside Serie E2C. 15, closed Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 28 - 75 mm Pitch: 20 mm e-chain®, closed iF-Design-Award for E2 micro Series 05 Clean room test on request Special design: Electrically conductive ESD/Atex versions on request UL94-V0 classification for Series 03 and Series 14 (more on request) 42 dB(A) determined at the igus® laboratory, v = 1.0 m/s unsupported, Series 06.10.038.0 E2 micro E-Chains® are very small, one-piece and two-piece (B07/B09) E-Chains® with a low weight and therefore ideal for highly dynamic applications. E2 micro E-Chains® are stable and available in many versions. igus® also offers numerous accessories and mounting options. "UPGrades" of the snap-open versions are available for many types; they are interchangeable among themselves and can thus be used as, among others, spare parts pack for new installation options. Series 03 Inner height hi: 5 mm Inner widths Bi: 5 - 10 mm bending radii R: 10 - 28 mm Pitch: 10 mm E-Chain®, not-to-be-opened Series 04 Inner height hi: 7 mm Inner widths Bi: 7 - 30 mm bending radii R: 15 - 48 mm Pitch: 16,7 mm E-Chain®, not-to-be-opened Series 045 Inner height hi: 10,3 mm Inner widths Bi: 6 - 64 mm bending radii R: 18 - 38 mm Pitch: 13 mm E-Chain®, not-to-be-opened Series 05 Inner height hi: 10 mm Inner widths Bi: 6 - 64 mm bending radii R: 18 - 38 mm Pitch: 20 mm E-Chain®, not-to-be-opened Series 06 Inner height hi: 10,5 mm Inner widths Bi: 6 - 64 mm bending radii R: 18 - 38 mm Pitch: 20 mm E-Chain®, not-to-be-opened Series 08 Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 25 - 48 mm Pitch: 20 mm E-Chain®, not-to-be-opened Series B07 Inner height hi: 10,3 mm Inner widths Bi: 6 - 64 mm bending radii R: 18 - 38 mm Pitch: 20 mm E-Chain®, snap-open along the outer radius Series B09 Inner height hi: 14,3 mm Inner widths Bi: 16 - 40 mm bending radii R: 28 - 48 mm Pitch: 20 mm E-Chain®, snap-open along the outer radius Series 074 Inner height hi: 10.9 mm Inner widths Bi: 10 - 40 mm bending radii R: 18 - 38 mm Pitch: 20 mm E-Chain®, snap-open along the inner radius Series 094 Inner height hi: 14,3 mm Inner widths Bi: 10 - 40 mm bending radii R: 28 - 48 mm Pitch: 20 mm E-Chain®, snap-open along the inner radius Series E2.10, openable along the outside Inner height hi: 10 mm Inner widths Bi: 6 - 50 mm bending radii R: 10 - 38 mm Pitch: 20 mm e-chain®, snap-open outside Series E2i. 10, openable on the inside Inner height hi: 10 mm Inner widths Bi: 6 - 50 mm bending radii R: 10 - 38 mm Pitch: 20 mm e-chain®, snap-open inside Serie E2C. 10, closed Inner height hi: 10 mm Inner widths Bi: 6 - 50 mm bending radii R: 10 - 38 mm Pitch: 20 mm e-chain®, closed Series E2.15, openable along the outside Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 28 - 48 mm Pitch: 20 mm e-chain®, snap-open outside Series E2i. 15, openable on the inside Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 28 - 48 mm Pitch: 20 mm e-chain®, snap-open inside Serie E2C. 15, closed Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 28 - 75 mm Pitch: 20 mm e-chain®, closed E-Chain® selection aids You can find the right E-Chain® quickly by entering concrete parameters and with the aid of a comparison table. Selection aids Installation instructions Joining and separating of the E2 micro E-Chain®. Assembly Instructions Application examples Applications in various industrial sectors. E2 micro For restricted spaces One and two-piece E-Chains®, from 5 mm inner height High torsion resistance Smallest inner heights and bending radii Mounting brackets with strain relief optional Small pitch for silent operation Cable-friendly interior Low weight Large pins for a long service life Favorable internal/external dimensions ratio B07/B09 in two parts - Can be folded out in outer radius due to integral hinges Typical industrial sectors and applications General construction machinery Models (micro E-Chain®), Automatic doors Vehicles Measuring machines Electronics Handling systems Pick and place robot iF-Design-Award for E2 micro Series 05 Clean room test on request Special design: Electrically conductive ESD/Atex versions on request UL94-V0 classification for Series 03 and Series 14 (more on request) 42 dB(A) determined at the igus® laboratory, v = 1.0 m/s unsupported, Series 06.10.038.0

Compatibility: The mobile wireless receiver can be coupled with Vices of ALLMATIC Clamp assist Serie: TITAN 2 K/M/L TITAN 2-160 Scope of application: -Acquisition of the current tensions in the fully encapsulated high pressure spindle by means of an integrated, electronic measuring system and transfer to the mobile receiving unit -Independent from the jaws, the measurement system is integrated in the spindle -Clamping force is constantly monitored during its actual tension condition -Storing of the clamping forces can be called up at any time through the electronics integrated in the spindle -Power values are transmitted via radio to the mobile receiving unit (MWR) (2. 4 GHz) -MWR simultaneously and digitally displays the clamping force for up to 4 spindles in kN -The clamping force (reference power) default, set by the user, is indicated by a led at the MWR upon reaching the 90% mark -The last 200 stored clamping operations can be transferred in CSV format

HGL offers tailor-made PC solutions that have been specially developed to form a holistic measurement system in combination with HGL amplifiers. The PCs offer sufficient power reserves and storage capacity to operate several measuring devices in parallel on one computer and are compact in design. The compatibility with the existing measurement hardware was tested in numerous test series. Different form factors offer different ways to accommodate the computer hardware. In the 19" format, installation in measuring cabinets is no problem. Other form factors offer the option of mounting the PC directly to the back of a monitor. Network switches integrated into the PC hardware provide additional flexibility and clarity when setting up and operating complex measurement systems.

The ideal introduction to the world of vibration measurement. With four analog input channels, the Mosquito offers the ability to detect a triaxial vibration sensor and a speed signal. Alternatively, a modal hammer could also be operated for a measurement with subsequent modal analysis. •,4 analog input channels (from +/-10uV to +/- 100V) •,1 digital input channel (0-5V CMOS) •,1 analog output with signal generator (DC, 0-100kHz sine, sweep) •,Up to 100kHz bandwidth synchronously sampled across all channels •,16/24 bit resolution with 110+dB signal-to-noise ratio •,Compact dimensions (40 x 90 x 170 mm) •,Freely scalable! From one device with 4 analog channels to multiple devices with any number of channels •,1x Ethernet interfaces, connection for external 12V power supply, LVDS port for synchronization of multiple devices, USB port, IRIG input

The WARP portable is a mobile, radar-based hand-held gauge for selective wall thickness measurement, specially designed for medium and large pipe extrusion as well as for sheets. The application possibilities are very flexible, whether as a quick centering aid in the start-up process, for final production control or as a stock control device. Not only wall thicknesses at pipe ends can be measured, but also the progression inside a pipe section or a sheet. The measurement itself is performed at the push of a button. The last 500 measured values including the measuring angle on the pipe as well as the time stamp are stored. Over 400 WARP portable sold speak for themselves. Other advantages/features: — Hand-held measuring device for wall thicknesses from 2 to 110 mm (depending on material) — Measured value log including measuring position on the pipe (last 500 measured values) — Intuitive handling — Splash-proof housing (IP54)

ECCO is the efficient solution for fast pipe centering. Especially for thick-walled large pipes, with low line speeds and high mass throughput, the start-up process is difficult, time-consuming, and associated with high raw material costs. ECCO makes it possible to measure the wall thickness distribution shortly after the pipe calibration. The ultrasonic sensors, which are mounted directly behind the calibration sleeve in the vacuum tank, are pneumatically and flexibly moved up to the respective pipe geometry after line start-up and adapted to the pipe. Further advantages/features: — Significant reduction of start-up scrap — Fast pipe wall centering — Fast reaching of product specifications after product start-up — Fast detection of product variations — Uniform wall thickness distribution — Suitable for PE, PVC, and PP with an outside diameter from 200 mm (wall thickness range PE from 8 - 140 mm, wall thickness range PVC and PP from 8 - 40 mm)

The AUREX ERS uses the measuring technique of the Electronic Rotating Scanner (ERS) principle. With this active-passive measurement, every point of the measured object is detected 100% in longitudinal and circumferential direction, so that even minimal tolerance deviations are detected. Coextruded layers can also be detected as soon as they are physically detectable by ultrasound. The AUREX ERS is complemented by the optional "Quality Check", a wall thickness error check. The "Quality Check" detects anomalies on the surface, in the material and on the inner surface of the pipe. Further advantages/features: — 100 % wall thickness measurement for pipe dimensions up to 630 mm in diameter — Electronic rotation up to 16,000 rpm — Evaluation of vertical and angular signals reflected from the tube by activating adjacent sensors — Highest measuring resolution and identification of smallest production variations

The WARP CP is an inline measuring system with radar-based wall thickness sensors for detecting the various structures of a corrugated pipe. Outer and inner diameters, as well as the wall thicknesses of the bell, crest, liner, and valley can be resolved. The system is available for large, corrugated pipes with diameters from 300 mm. Since the corrugated tube has different structures, it is therefore necessary to assign the measurement data to the corresponding position on or in the tube. The WARP-CP algorithms do this automatically and prepare the data for the user in such a way that he receives different graphics and corresponding measurement data for each structure. Other advantages/features: — Non-destructive, contactless, and automated inline measurement of all relevant structures of the corrugated tube — No waste due to destructive measurement — Repair of critical thick and thin spots — Saving of material overweight in the end product

The QUANTUM 360 has a terahertz sensor that reverses along the pipe to be measured. The coverage corresponds to a full 360° over the entire circumference of the pipe. This allows a very accurate overview of all process parameters. After selecting the pipe recipe, the QUANTUM 360 detects the pipe position, centers itself automatically to the pipe via a cross table and the sensor is automatically moved into focus. When changing dimensions, only a change of the pipe recipe is required. Due to the high measuring frequency, wall thickness, diameter and multi-layer measurements are possible with layer thicknesses from 100 μm. Other advantages/features: — Detailed product information (wall thickness, diameter, eccentricity, ovality) — Process automation through proven control principles — Non-contact measurement, no seals required — Material savings of up to 5% — Coextrusion measurement

The AUREX AFM measuring chambers are flanged directly to the outlet of the vacuum tank. With up to 24 sensors a reliable and precise ultrasonic measurement with a centric pipe guidance is guaranteed. The measuring chambers are available for a diameter range of 63 - 630 mm. The AUREX AFM performs wall thickness and diameter measurement in parallel according to the number of sensors. Optionally, the AUREX AFM can be equipped with the "Fast Specification Check MK/AFM", which enables a fast wall thickness check. Since the AUREX AFM does not completely cover the tube at the circumference, this wall thickness check can, for example, detect typical thin section rings, which are caused by jerks of the produced tube at the entire circumference. Further advantages/features: — Large measuring range with measuring range extension — Parallel measurement of wall thickness and diameter — Very robust mechanics — Separable adapter for easier seal change

WARP 100 is an inline pipe measuring system for wall thickness and diameter measurement at up to 38 measuring points and 19 axes. More than 1100 measurements per second guarantee a gapless measurement. This is particularly important for pipes with high quality requirements, such as pressure or gas pipes. The maximum line speed for 100% coverage is up to 11.8 m/min. WARP 100 is available in three sizes and can be used for measurement in the diameter range from 25 to 630 mm. Measured variables such as wall thickness, diameter, ovality, eccentricity as well as process conditions (e.g. sagging) are precisely recorded, documented, and further used for automatic process control. Other advantages/features: — Measurement with 100% pipe coverage in diameter range from 25 to 630 mm (three sizes) — Wall thickness range from 2 up to 125 mm (depending on material) — Detection of thin sections within the tube — 100% documentation of production according to specifications

The AUREX MK is the complete solution for pipe dimensions from 0.5 - 400 mm. It enables compliance with the specified tolerances for wall thickness, eccentricity, diameter and ovality. Thanks to the combination of high-quality electronics with innovative measuring methods, up to 7 layers from 0.02 mm wall thickness can be evaluated. In addition to the standard measurement for control and visualization of the product, the "Fast Specification Check MK/AFM" is optionally available, which allows a fast wall thickness check. Since the AUREX MK does not completely cover the pipe at the circumference, this wall thickness check can be used, for example, to detect typical thin section rings caused by jerking of the produced pipe at the entire circumference.

The iXRAY solves almost all measuring, automation and documentation tasks for single and multi-layer pipes and hoses. Thanks to a precise spatial resolution and repeatabilities in the µm range, the system reliably generates exact measurement data. At high line speeds, the X-ray system - optionally two or three axes - delivers precise measurement results. The standard systems are available for pipe dimensions from 1 to 63 mm. The iXRAY series is user-friendly and the line operator only has to select the pipe, hose, or cable recipe to start the measurement. Other advantages/features: — Measurement of wall thickness distribution, inner and outer diameter, ovality and eccentricity — Up to 6 wall thickness values on the pipe or hose circumference — 3 diameter axes at 120° angle — High repeatability — High precision X-ray tubes with anode voltage up to 60 kV — Non-contact measurement, no seal, and no dimension-dependent accessories

The AUREX XXL is the solution for large pipes with a diameter of up to 3000 mm. The system works with 8 water-coupled ultrasonic sensors that can be pneumatically adjusted. This is possible without conversion in case of a change of dimensions. Minimum wall thickness tolerances are obtained via the downstream control loops of the weight per meter and thin point control and production is perfected. The better centering enables considerable material savings, especially for large pipes. Further advantages/features: — Production quality assurance by measuring and controlling wall thicknesses and diameter — Documentation of production — Material savings of up to 5% — Large measuring range — Proven measuring and control principles

Specifications OIML R76: 2006 Type Approval Certified Wide-angle 51mm high LCD screen (with backlight) Easy to install design High speed 24 bit Delta Sigma-Analog Digital converter Programmable two-stage Capacity Kg / Lb unit conversion Counting pieces Checkweighing HI-OK-LO Live animal weighing Rechargeable internal battery Battery status indicator Connecting 8 pieces 350Ohm load cell RS232 Communication RS485 Communication (Option) Real-Time Clock (Option) TECHNİCAL SPECİFİCATİONS CLASS III OIML R-76 approval reset Tare Negative measurement Auto-scan Reset at boot Manual reset Animal weighing mode Multi-range weighing Metric / Imperial conversion Battery level indication, the low battery warning 3 point orange RS-232 (RS 485 optional) Optional relay control output (i5indicators do not support this feature) optional Date / Output with Clock Ability Simple counterbalance Internal battery (i5 indicators are without battery)