Concrete - Import export

TECHNICAL DEFINITION Levelling filler for vertical substrates and for use on ceilings for poured concrete or pre-cast slabs. Ideal for the preparation of pre-cast slabs, formwork concrete and for the renovation of textured finishes or fibreglass with a paint finish. TECHNICAL CHARACTERISTICS • Dry extract : 75% • Density : 1.86 • VOC content : less than 1g/l COMPOSITION AND APPEARANCE Water, calcium carbonate, dispersant, bactericide, fungicide, cellulosic fibres, polyacrylates, clays, acrylic dispersant. AMOUNT REQUIRED From 2 to 4 kg for the first coat. From 1.5 to 2 kg for the second coat. APPLICATION SEMIN AIRLESS EXTREM filler is sprayed using the Airless pump or rotor machine/Flat spray stator in 2 coats. The first coat must be levelled using a 60 cm blade or levelled with a straight edge. After drying, the second coat must be smoothed using a blade.

Status: Natural Apperance: paste Alcoholic degree: none Miscibility: Alcohol; Oil-soluble

Status: Natural Apperance: paste Alcoholic degree: none Miscibility: Alcohol; Oil-soluble

Status: Natural Apperance: paste Alcoholic degree: none Miscibility: Alcohol; Oil-soluble

Status: Natural Apperance: paste Alcoholic degree: none Miscibility: Alcohol; Oil-soluble

Status: Natural Apperance: paste Alcoholic degree: none Miscibility: Alcohol; Oil-soluble

Status: Natural Apperance: paste Alcoholic degree: none Miscibility: Alcohol; Oil-soluble

Status: Natural Apperance: paste Alcoholic degree: none Miscibility: Alcohol; Oil-soluble

Status: Natural Apperance: paste Alcoholic degree: none Miscibility: Alcohol; Oil-soluble

Ideal for creating a space dedicated to fun, this concrete table tennis table from JAD Groupe is even more robust thanks to its reinforced concrete design. It's maintenance-free, so you can create a play area that's perfect for sports. Suitable for outdoor use, this concrete furniture combines both aesthetics and safety for all users with its rounded corners, and no lifting equipment is required to install this reinforced concrete ping pong table. Made of reinforced concrete Freestanding Can be laid or embedded (pre-drilled base) Consists of 2 legs, 1 spacer, 2 tops and a net Guaranteed bubble-free Glazed effect for a perfect finish Colour tinted in the mass Several colours available (Terre de Sienne, Green, Blue, Yellow) Fixing and assembly accessories included 2740 x 1525 x 760 mm

Distriplast is the European manufacturing leader in PP corrugated sheeting for the building sites. Manufacturing 24/7 in Dunkirk, close to UK with corresponding short lead times. Made of black reground PP, and for the LPS1207 sheets from prime PP.

The short flute developed at our request by the company DIAGER makes it possible to meet the constraints of asbestos sites and avoids gel drips on the operator during drilling in the roof. It is also a visual cue to avoid drilling too deep. SPECIFICATIONS • Solid carbide insert with selfcentering point • Pad angle 135° • 3 simultaneous contact points • The new propeller offers a double cut halfround and square • SDSplus compatible attachment

The short flute developed at our request by the company DIAGER makes it possible to meet the constraints of asbestos sites and avoids gel drips on the operator during drilling in the roof. It is also a visual cue to avoid drilling too deep. SPECIFICATIONS • Solid carbide insert with selfcentering point • Pad angle 135° • 3 simultaneous contact points • The new propeller offers a double cut halfround and square • SDSplus compatible attachment BENEFITS • The 3piece monobloc cutting insert is an allconcrete solution • Selfcentering point provides precision when starting the hole

The short flute developed at our request by the company DIAGER makes it possible to meet the constraints of asbestos sites and avoids gel drips on the operator during drilling in the roof. It is also a visual cue to avoid drilling too deep. SPECIFICATIONS • Solid carbide insert with selfcentering point • Pad angle 135° • 3 simultaneous contact points • The new propeller offers a double cut halfround and square • SDSplus compatible attachment BENEFITS • The 3piece monobloc cutting insert is an allconcrete solution

The pavers are created from a drop of glass pressed at a temperature of 1050°C. Shell pavers are then annealed at 560°C to remove internal stress.

The pavers are created from a drop of glass pressed at a temperature of 1050°C. Shell pavers are then annealed at 560°C to remove internal stress.

The pavers are created from a drop of glass pressed at a temperature of 1050°C. Shell pavers are then annealed at 560°C to remove internal stress.

The vacuum lifters designed by ACIMEX guarantee enhanced safety on construction sites because only one worker is needed to operate the vacuum lifter. Consequently, the movements are performed remotely, which enables the technician not to be in contact with the part.

USE : Extracting of Bolts and Sleeper Screws Bolts that are either broken inside of the concrete Sleepers or loose. ADVANTAGES : Simple and high-effiency : 90 Bolts removed per day by 3 Operating Agents. Note that proceeding in this way, you can achieve significant savings by avoiding the necessity to replace concrete Sleepers. - T-shaped body with tightening handle for holding collet. - Holding collet in treated steel with jaws - 1 Balance Lever to extract broken bolts. - Net Weights : Wrench = 14 Kg / Lever = 9 Kg - For Ø 18 mm Bolt - Ref. CE 18 - For Ø 22 mm Bolt - Ref. CE 22 - Total Height = 1.10 m - Length of the Arm = 0.80 m. - Length of the Crank Handle = 0.27 m. OPTIONS : SPARE PARTS = Holding Collet for Ø 18 mm Bolt - Ref. P.I.18 Holding Collet for Ø 22 mm Bolt - Ref. P.I.22 BORING BIT Ø 23 x 30 mm - Length 140 mm (Graffenstaden Shank) - Ref. TR.23 (Cleaning of the Bolt Hole )

When the use of formwork with integrated gangway proves impossible. This vertical metal formwork has a multitude of interests which make it a first-rate product: Its metallic structure is solid and allows it to withstand high stresses in terms of re-concreting. Its plywood in PVC or metal wood allow it to have a good quality rendering during the formwork removal of concrete . Its maintenance is simple , it is easily cleaned with a high pressure cleaner. Its lifespan is high because the structure does not wear out very much and can be easily repainted after a few years of use. The formwork skin which is screwed or riveted is easily changed. Our selection of Modular Formwork Construction and civil engineering / innovative formwork and benefiting from unbeatable prices thanks to high production volumes Module 3.00mx 2.00m Metal chassis, 4 holes.

9 × Kit of trusses + support + connection 9 × STEEL formwork panel GP10 3m x 1m 8 × GP10 single or variable alignment flanges 2 × GP10 lifting hooks 4 × Service consoles with blockers 2 × Compensation 3000 x 50 mm 3 x painted steel modular formwork panel 0.50 x 3m 1 x Accessory boxes 120 x 80

This Pack consists of 40 x painted steel modular formwork panels 1.50 m x 1.00 m 4 x painted steel modular formwork panel 0.60 x 1.5 m 4 x painted steel modular formwork panel 0.60 x 1.5m 8 x painted steel modular formwork panel 0.40 x 1.5 m 8 × Offset 150 x 10 cm 8 × Offset 150 x 5 cm 2 × GP10 lifting hooks 4 x Inside angle H: 1.5m, 0.30x0.30 m 60 × Tightening rod 750 cmm DW15 + 2 nuts DW15 112 × Single GP10 Alignment Flanges 8 × Variable angle flanges GP10 16 × GP10 Variable Alignment Flanges 2 x 120x80 accessory boxes

10 x modular painted steel formwork panels 3m x 2m 20 × Single or variable GP10 alignment flanges 20 × Tightening rod 750 cmm DW15 + 2 nuts DW15 2 × GP10 lifting hooks 5 × Double push pull props GP10 5 × Service consoles with blockers 1 x Inside angle H: 3m, 0.30x0.30 m 1 x painted steel modular formwork panel 0.60 x 3m 1 x painted steel modular formwork panel 0.50 x 3m 2 × Compensation 3000 x 100 mm 2 × Compensation 3000 x 50 mm 3 × Variable angle flanges GP10 8 × GP10 Variable Alignment Flanges 1 x Accessory box 120x80

This pack consists of -20 x painted steel modular formwork panels 3m x 1m - 40 × GP10 single or variable alignment flanges - 33 × Tightening rod 750 cmm DW15 + 2 nuts DW15 - 2 × GP10 lifting hooks - 5 × GP10 double push pull prop - 5 × Service consoles with blockers - 1 x Inside angle H: 3m, 0.30x0.30 m - 1x of modular painted steel formwork 0.60 x 3m - 1 x painted steel modular formwork panel 0.50 x 3m - 2 × Compensation 3000x100 mm - 2 × Compensation 3000x50 mm - 3 × Variable angle flanges GP10 - 8 × Variable alignment flanges GP10 - 1 x Accessory box 120x80

This pack consists of - 20 x modular painted steel formwork panels 3m x 1m - 40 × GP10 single or variable alignment flange - 33 × Tightening rod 750 cmm DW15 + 2 nuts DW15 - 2 × GP10 lifting hooks - 5 × GP10 double push pull prop - 5 × Service consoles with blockers

This pack consists of 20 x painted aluminum manual formwork panels 3m x 1m 40 × GP10 single or variable alignment flange 33 × Tightening rod 750 cmm DW15 + 2 nuts DW15 2 × GP10 lifting hooks 5 × Double push pull props GP10 5 × Blocker consoles

KBC Diffusion, specialist in the sale of formwork, offers you the SATECO formwork panel range in New but also in used products.

KBC, specialist in the sale of modular formwork, and manual formwork, can renovate your formwork panels. We can renovate your Jean Four eurobress formwork, your PERRI formwork, your DOKA formwork, your DEKO formwork, your COFFERCO formwork and all brands of formwork.