Machines and equipment - Import export

Special hydrocarbon PVC Nitrile hose reinforced with a rigid shockproof PVC spiral Smooth inner and outer surfaces High manoeuvrability characterised by its flexibility even at low temperatures

Shell fitting with “Vulkolan” polyurethane seal, Ø 25 F - 1''

Brass or Stainless steel Orifice: Ø 19 or Ø 25 mm

Automatic stop dispensing gun for unleaded petrol 1" rotating connector Outer diameter of the spout: 20 mm Flow rate: 50 l/min

PTFE seal Orifice: 1’’ Female BSP or 1’’ Male BSP Flow rate: 80 l/min

PTFE seal Ø 25 mm corrugated coupling Flow rate: 80 l/min

Pistolet à arrêt manuel laiton nickelé Joint PTFE Orifice 1’’ F Débit 80 l/min

Nickel-plated brass manual stop gun PTFE seal Ø 25 mm corrugated coupling Flow rate: 80 l/min

Special hydrocarbon PVC Nitrile hose reinforced with a rigid shockproof PVC spiral Smooth inner and outer surfaces High manoeuvrability characterised by its flexibility even at low temperatures

Special hydrocarbon PVC Nitrile hose reinforced with a rigid shockproof PVC spiral Smooth inner and outer surfaces High manoeuvrability characterised by its flexibility even at low temperatures

Opal-fuel hose Ø 20 x 25.8 mm, resistant to negative pressure Type of hose: Special hydrocarbon PVC Nitrile hose reinforced with a rigid shockproof PVC spiral Smooth inner and outer surfaces

Opal-fuel hose Ø 30 x 36 mm, resistant to negative pressure Type of hose: Special hydrocarbon PVC Nitrile hose reinforced with a rigid shockproof PVC spiral Smooth inner and outer surfaces High manoeuvrability characterised by its flexibility even at low temperatures

Opal hose Ø 50.8 x 59 mm Type of hose: Phthalate-free PVC hose reinforced with a rigid shockproof PVC spiral Cuttings per metre available on request

Suction equipment comprising: 3/4" elbow joint with sleeve 1 metre of Ø 32 mm hose Foot valve

Suction equipment comprising: 3/4" elbow joint with sleeve 1 metre of Ø 25 mm hose Foot valve

3” discharge kit for PE-A3: fire department fitting + 5 m of flat PVC Ø 80 hose + clamp

2” discharge kit for PE-A2: fire department fitting + 5 m of flat PVC Ø 50 hose + clamp

Flat PVC Ø 50 hose, working pressure of up to 8.5 bars

Flat PVC Ø 25 hose, working pressure of up to 10 bars

Suction kit comprising: metre long stainless steel pipe 2” bung For 3/4” orifices

Equipment for petrol pumps for the volumetric dispensing of fuel: normal and super petrol, unleaded petrol, biofuels and diesel Type of hose: Flexible Volukler rubber hose Ø 25 x 37 mm Pipe: NBR resistant to petrol, black, smooth. Coating: NBR/PVC resistant to oil and bad weather, black, smooth.

Suction kit comprising: 1-metre long steel pipe 2” bung For 3/4” orifices

Adaptable elbow for plastic jug

Plastic funnel with filter and straight stem

Flexible tube for tinplate jug

Tinplate jug

Tinplate jug

Once fixed to the outside of the tank, this device enables the detection of the lower (BO contact) and upper levels (NF contact). It is essential to verify that the chemical nature of the stored liquid is compatible with the immersed components of the level detector.

Counterweight. The installation of the counterweight on the float enables the adjustment of the upper and lower points of activation.