Slides - Import export

Slides contribute greatly to the success of outdoor playgrounds. With its TOBY slides, QUALI-Cité offers a wide range of themed and customisable models: Bonzaï, Giraffe, Dinoboggan... They are suitable for all ages from 1 to 14 years depending on the drop height from 0.60 m to 1.80 m. Open-air or in a tube version, QUALI-Cité® slides provide new sensations even for older children. Children develop their sense of balance, their muscles and their perception of space. The slides are available in two versions: stainless steel, which is very attractive, resistant and easy to maintain, or Starboard®, which is particularly suitable for games exposed to high temperatures.

Who hasn't dreamed of a tree house, a landmark nestled among the branches hidden from the rest of the world? The KA'HÛTE range has been created in an ultra-natural and raw spirit while maintaining a very childlike atmosphere through its many colourful details. KA'HUTE outdoor playground structures are above all a compromise between the warmth of wood and the need for easy maintenance, without risk of injury and lasting over time. The QUALI-Cité® old pine HPL panels offer both an attractive wood look and an attractive equipment without the constraints linked to the ageing of wooden structures. A KA'HUTE hut is also the assurance of beautiful stories where everything is possible from 2 years old!

The SYMBIOZ® range for playgrounds combines a carefully studied and refined design for your play structures for collective use with quality finishes. For many years, QUALI-Cité® has proven itself in the design of playgrounds for collective spaces and adapts to all requests. With its colourful panels, SYMBIOZ offers many physical and play activities such as climbing walls, vertical nets, rope bridges and new manipulation panels. The height of the platforms, from 0.60 to 1.80 m, can be adapted to the public concerned, from 1 to 12 years old.

Carriage body zinc. Plastic bearing material iglidur® J. Rails anodised aluminium. Version Body chromed. Guide rail natural colour anodised. Note Miniature slide guides are maintenancefree and corrosion resistant. Very high speeds and accelerations are possible due to the low weight. Applicable temperature max. 80 °C. Miniature slide guides are insensitive to dust and are ideal for dry running. ** length L2 = 30 mm and * L = 1000 mm included L2 and L only available in full mm.

Manual XY positioning stage realized with leadscrew table 309L Manual XY positioning stage Tables 309L are assembled carriage on carriage (long carriage version only) with the option 308922 * making smooth holes in the carriage of a table. The standard strokes for each axis are 100, 200 or 300 mm. The same options as the 309L tables are available (handwheel, knob, indicator, locking, base plate). The choice of the type of guide is also the same (bronze or ball bushings). The axial positioning accuracy of these tables is <0.15 mm (in practice 0.02 to 0.10 mm). Positioning tables with base plate Base plates are only available for standard strokes (100, 200 and 300mm). The lower plate allows the table to be fixed by the 4 holes in the central zone, while without a base plate, the table must be fixed by the end plates.

Sold in pairs. Fastening material included. Note As an option for floor, platform or side mounting.

Slides stainless steel 1.4301. Ball cage stainless steel 1.4301. Balls stainless steel 1.4034. Version Slides bright. Ball cages bright. Balls bright. Note for ordering Sold in pairs. Note On telescopic slides with overextension, the travel is greater than the installed length. Latches in open position. When the release lever is actuated, the drawer can be taken out easily and separated from the guide. The dynamic load capacity of the telescopic slides indicates the maximum load rating of a vertically mounted slide pair when the entire extension length is used. The load capacity specified is calculated with a slide spacing of 400 mm and is based on the maximum value with 10,000 cycles. The load capacity is ca. 75% lower by horizontal mounting. The head height of the fastening screws should not exceed 2.5 mm otherwise there is a risk of collision with other parts of the slide.

Slides steel. Ball cages steel. Balls, steel. Version Slides electro zincplated. Ball cages, electro zincplated. Balls hardened. Note for ordering Sold in pairs. Note On telescopic slides with partial extension both sides, the travel is less than the installed length. Latches in open position on both sides. The dynamic load capacity of the telescopic slides indicates the maximum load rating of a vertically mounted slide pair when the entire extension length is used. The load capacity specified is calculated with a slide spacing of 450 mm and is based on the maximum value with 50,000 cycles. The load capacity is ca. 75% lower by horizontal mounting. The head height of the fastening screws should not exceed 2.5 mm otherwise there is a risk of collision with other parts of the slide. Advantages Pulls out in both directions Latches in open position on both sides Light running

Slides steel. Ball cages steel. Balls, steel. Version Slides electro zincplated. Ball cages, electro zincplated. Balls hardened. Note for ordering Sold in pairs. Note By telescopic slides with full extension, the travel is roughly equal to the installed length, which ensures greater comfort and accessibility. The dynamic load capacity of the telescopic slides indicates the maximum load rating of a vertically mounted slide pair when the entire extension length is used. The load capacity specified is calculated with a slide spacing of 450 mm and is based on the maximum value with 80,000 cycles. Not suitable for horizontal mounting. The head height of the fastening screws should not exceed 1.8 mm otherwise there is a risk of collision with other parts of the slide. Advantages Low slide thickness Light running Precise guidance for high lateral stability

Aluminium outer ring and inner ring. Iglidur® J plastic slide elements. Stainless steel A2 screws. Version Anodised outer ring and inner ring. Note Aluminium plain bearings with replaceable, high performance material glide elements for rotary stages. Such a combination of materials guarantees absolutely lubricant and maintenancefree running. Simple assembly. High wear resistance. For high loads, high rigidity.

Extruded section, aluminium EN AW6060. Version Hard anodised aluminium, 50 µm. Hardness 500 HV. Note The aluminium guide rail has good thermal conductivity and importantly heats only at continuously very high speeds. ** lengths L2 = 20 mm * and L = 500 mm included L2 and L only available in full mm.

Sliding carriage Base structure in extruded section, aluminium EN AW6060. Sliding elements Maintenance free plain bearing iglidur® J. Version Eloxalcoated E6/EV1. Black thermoplastic Note With a low rate of inerita, high accelerations and short term extreme speeds up to 30 m/s are possible. DryLin® T linear glide guides are resistant to dirt and corrosion and are adjustable, maintenancefree and quiet. Application temperature max. 80 °C. As no lubricants are used they are recommended for use in food, medical, and clean room technologies. Manual clamping was developed for simple functions. Polymer under constant pressure has a tendency to creep which causes a decrease in clamping force over time (up to 70%), which means that no safetyrelevant parts should be clamped. Suitable guide rails see 21200. Drawing reference 1) manual clamping

Microwave sensor for contactless monitoring of material flow in air slides. • easy to install • easy to retrofit • gives trending information by 4 20 mA output • immediate alarm when flow is interrupted

Slide Rideon 365 v2 MAX Motor: 250W Batteries: 36V - 7.8ah Range: 25kms Maximum speed 25km/h Weight: 12kgs With Bluthooth application

These precision slideways with roller bearings are used in machine and fixture construction, metrology, optical instruments and precision mechanics. The scale division on the micrometer dial is 0.02 mm. The stated permissible load values (F) are designed for a service life of 1 million travel cycles. The torque values apply only to centred slides. An additional centring hole is located at holes D2 and D3 on the top of the slide. Other connecting elements can be precisely mounted on the slide in combination with our centring rings 20240. F = permissible loading for dynamic and static loads. TI E/E1 = number of fastening holes E/E1/M inside. TA E/E1 = number of fastening holes E/E1/M outside. TI E4 = number of fastening holes E4/D1 inside. TA E2 = number of fastening holes E2/D1 outside.

These precise slideways are used in e.g. machine, fixture and metrology equipment construction as well as in the optical and precision engineering industries. The central set screw M1 can be replaced by a clamping lever 06460. The stated permissible load values (F) are designed for dynamic loads with a service life of 1 million travel cycles. For static loads, 10 times the table value F is permitted. The torque values apply only to centred slides. An additional centring hole is located at holes D2 and D3 on the top of the slide. Other connecting elements can be precisely mounted on the slide in combination with our centring rings 20240. TI E = number of fastening holes E/M inside. TA E = number of fastening holes E/M outside. TI E1 = number of fastening holes E1/D1 inside. TA E1 = number of fastening holes E1/D1 outside.

These precision dovetail slides find use in e.g. machine and fixture construction, metrology, optical instruments and fine mechanics. The stated permissible load rating (F) is for static loads. The torque values only apply for centred carriages. TI = number of fastening holes E1/E2/MI inside. TA = number of fastening holes E/E1/MA outside. TM = number of centring holes D1 inside. TN = number of centring holes D1 outside. Advantages An additional centring hole is located at all tapped holes. Other connecting elements can be precisely mounted on the slide in combination with our centring rings 20240. Quick and retrofit combination in the X, Y and Z axes.