Ceramics - Import export

Use: Connectors for thermocouples and resistance thermometer measurement circuits. Suitable for measurement with small wires and mineral-insulated metal sheathed cables. Mechanical design: • Ceramic housing with contacts of original thermocouple materials and 
spring-loaded sockets for reliable contact . • Reverse polarity protection by different contact pin widths. • Oversize screw head for easy wiring. • One-piece housing withstands great stresses. • Housing of high purity alumina oxide.

We offer melamine In guaranteed quality, at stable prices and packed appropriately for transportation. Do you need advice on choosing your product or are you looking for a suitable substitution? Our application and product experts are happy to help! Our experience and deep knowledge in the area of specialty chemicals and ingredients ensures that we are well positioned to effectively support both our customers and our suppliers with product and application expertise. Please contact us for more information!

NKCG offers a complete portfolio of carbon-based products for vacuum sintering process of hard metals and ceramics.

We offer polymer ceramic component parts where plastic molding is required for complicated particle shapes and where the thermal stability of plastic is insufficient.

Heating bands are the ideal solution for the heating of tubes an cylinders. Mica band heaters, frequently used as nozzle heaters, are made with a plastic-tight stainless steel casing. Such mica heating bands are in many dimension available from stock. The Ceramic heating band type is suitable specially for applications with high watt density and therefore for higher temperatures. Ceramic band heaters, also known as ceramic ring heaters or cylindrical ceramic sectional heaters, are attached to the contact surface by means of a clamping mechanism. A preferred field of use for ceramic band heaters is the heating of plasticising cylinders, bushings and nozzles of injection moulding machines and screw barrels of extrusion machines. For thermal optimization and process control ceramic band heaters can also be offered with insulation jackets or air cooling.

Ceramic Insulated (Band) Heaters are predestined for high-temperature applications beyond 450 °C, for example for pipe heating in process heat technology, especially when gases are involved. Ceramic insulated sectional surface heating elements are also brought into action where a heat storage capacity is needed, as in hot plates the case. With the heating surface of ceramic flat heaters being composed by small-limbed ceramic elements with aligned holes in the centre for the resistance coils to be fed through, ceramic sectional heating mats are also applicable for bent or cylindric surfaces. Like Micanite insulated flat heating elements also Ceramic insulated elements can receive a metal sheath. The latter provides additional protection against mechanical load and allows for attaching connection boxes. Another advantage is the easy installation by means of mounting holes in the metal cladding.

With its state-of-the-art technology and advanced knowledge in production process, Ronix manufactures these Ceramic Cutting Discs with fully automated machinery. This technology makes cuts faster and ensures longer life time of the blades. The diamond tips of these circular tile cutting wheels have a unique and special formulation. This formulation consists of high-quality raw materials that minimize friction between the workpiece and the cutting disc. At last, this reduction of friction delivers a faster and cooler cut. This unique formulation allows our customers to use this disc for high-speed cutting applications. The diamond tips of the Ronix Ceramic Cutting Discs provide the users with chip-free and fine cuts.

Zirconium oxide-based ceramic beads type WIWOX® KM specially developed for shot peening and surface finishing. The high fracture toughness and surface smoothness of the ceramic beads allow the production of extremely smooth surfaces.

galvanized steel wire*ceramic centre

"Ball bearings with a material combination of bearing steel (inner and outer rings) and ceramic (balls) are called ‘hybrid’ ball bearings. All GMN ball bearings can be supplied as hybrid ball bearings. The material characteristics of ceramic balls in hybrid ball bearings result in significant increases in machine performance (in comparison to ball bearings using steel balls), especially under critical conditions.

universal usecooling, heating, clamping with bellows sealing cartridge fast change CDcartridgedesign sealingmaterial ceramics/graphite. For coking heat transfer oil with temperature higher than 230 °CVersion HT with diamondhard sealface and hightemperature graphitesealring graphite bushbearingsmaintenance free no elastomerstherefore no temperature and chemical resistance problems no loose parts, f.e. springs robust and less influence of dirty media self supportingno additional support necessary available in stainless steel PRESSURE MAXIMUM 6,0 bar heat transfer oil air 12,0 bar steam 17,0 bar water TEMPERATURE MAXIMUM 175 °C air 190 °C steam 300 °C water heat transfer oil SPEED MAXIMUM 700 1/min ISO 228 thread 700 1/min NPT thread SIZEDN 8 (1/4") DN 10 (3/8") DN 15 (1/2") DN 20 (3/4") DN 25 (1") DN 32 (1 1/4") DN 40 (1 1/2")

CSN ® Explosion proof cartridge heaters as direct heaters for liquids or gases in hazardous environment. These units are equipped with a heating bundle or a replaceable ceramic heating element. For temperature control these heaters are available with an integrated temperature monitoring system. These devices are available in various material grades. The electric cartridge heating element type 93./..EEx….T.(.) is designed for the heating of liquids in the zone 1 and zone 2. The standars elements, mentioned in this list are suitable for DGRL (code 2014/68/EU) Art. 4, Para. 3. The elements can be suited (on request) to other uses requiring another classification according to DGRL Further information about our CSN® ExCartridge Heater

thickness 3,8 mm*chamfered edges*usable above open burner flame

We are your reliable partner for the procurement and processing of technical ceramics, e.g. Oxide ceramics (alumina, magnesia, zirconium oxide) and non-oxide ceramics (with carbide or nitride). Technical ceramics - also called industrial ceramics or industrial ceramics - have unique material properties and are therefore one of the most powerful materials available. We offer the following ceramic materials and parts: Semi-finished products: Rods, pipes, flat material, etc. Laboratory parts: bowls, crucibles, etc. Finished parts: Drawing parts of all kinds according to customer requirements

Use: Installation clamp for ceramic jack, high-temperature Jack or miniature jack for panel installation. . Mechanical design: • All parts, including the screws, are made of stainless steel. Order no.: • A-20.210 Clamp for ceramic jack. • A-20.307 Clamp for high-temperature jack.

single inlet/outlet line or combined inlet/outlet line with stationary or rotating syphon pipe brass (rotor stainless steel) small diameter ceramic seal CDCartridgeDesign PRESSURE MAXIMUM 10,0 bar water TEMPERATURE MAXIMUM 90 °C water SPEED MAXIMUM 1000 1/min NPT thread 3500 1/min ISO 228 thread SIZEDN 10 (3/8") DN 15 (1/2") DN 20 (3/4")

increases friction between the belt and the surface of the pulley improves efficiency and guidance helps prevent material building up on the surface of the pulley protects the shell of the pulley from wear provides a wear surface that can be replaced economically Lagging materials for drive and non-driven pulleys: HP142 – Hot vulcanized rubber lagging HP144 – Cold bonded rubber lagging HP145 – Hot vulcanised ceramic lagging HP146 – Cold bonded ceramic lagging HP147 – Hot cast urethane lagging HP148 – Cold bonded urethane lagging HP149 – Direct bonded ceramic lagging

Belt width: 500-1400 mm Recommended speed: max. 3.5 m/s Blade material: hard metal, stainless steel, ceramic

Lubrication of all kinds of highly stressed sliding surfaces, especially at low slip speeds or with oscillating movements Surface separation of temperature-stressed threaded connections For stainless-steel connections Advantages and benefits Broad field of application Good wear and corrosion protection Prevents burning-on and cold welding Good pressure absorption capacity No classification marks according to (EG) No. 1272/2008 Prolonged lubrication effect Metal-free For best adhesion, clean contamination and other lubricants from thread and slide surfaces. Best way is to clean mechanically first (for example, with a wire brush) and then with OKS 2610/OKS 2611 universal cleaning agent. Use a brush, spatula or similar to apply evenly a suitable quantity of paste to the head or nut contact surface and to the thread. The paste also acts as a sealant against spray water and condensate. Do not use paste instead of grease and mix only with suitable lubricants.

The compression-type fittings are the link between the thermocouple and the test area and facilitate precise adaptation. After installing the compression-type fitting, the thermocouple can be inserted and clamped in with the desired installation length. That makes it possible to perform individual measurements with self-defined installation lengths directly onsite.

ALWA MOULD P is a cold curing casting resin for the production of porous moulds, slabs and blocks for the ceramic industry. It is a porous and high-strength plastic, which is well-suited for high pressure casting applications. ALWA MOULD P can be used in various areas of the tableware and sanitary ceramics, technical ceramics, plastic mould procedure as well as various filtration processes. The high stability and defined porosity of the material allows highly accurate mould surface reproductions. With ALWA MOULD P various geometric moulds for filtration processes of suspensions can be produced. ALWA MOULD P can be used for ceramic slip pressure casting procedures. In this procedure, water is removed by a filtration process of a clay suspension (slip), so that an increasing clay layer is built on the mould wall over time. The moulds, slabs and blocks of ALWA MOULD P are easily machinable (e.g., drilling, milling).

The CM-Sensors are specially designed for demanding applications: They withstand high pressures up to 100 bars (and more) at temperatures up to 190 °C. At conventional sensors with a similar size the probe head must be kept free from surrounding conductive objects, in order to avoid pre-attenuation of the measuring system. In contrast, the socket for the CM-sensor does not require additional notches or holes.This feature arises from the utilization of zirconium oxide as housing material and ferritic components with a focusing effect. The CM-sensor is typically applied to monitor the orbit of a turbocharger’s shaft.Its ball bearings have a squeeze film damper to reduce the rotor vibration. In order to optimize the entire system the CM-sensors detect the exact position of the turbine- and compressor wheel under real operating conditions.

Stones and granites are one of the most durable materials in the world. Almost all of the ancient buildings that has remained from various periods in the history, were made of granite and stone. Because granite is an extremely durable and highly resistant material, cutting and shaping plates of granite needs specific tools. However, to do the job, these tools also require cutting disks. This is why we at Ronix produce high-quality and strong granite cutting wheels as accessories. Our Granite Cutting Disks are made of top-quality raw material and with a unique formulation to deliver great performance and be as efficient as possible. Ronix segmented granite cutting disks are manufactured by hot press production process with fully automated machines. In comparison to cold press production process, the hot-press cutting wheels can deliver higher efficiency.

386 and Intel 486 Scrap Ceramic CPU Scrap ready for loading

Our all-ceramic bearings are characterised by their high corrosion resistance to seawater and various chemicals. They are therefore used, for example, in the chemical industry, in the food and beverage industry, in shipping and in chlorine systems. We can manufacture our full ceramic ball bearings with rings and balls made of zirconium oxide (ZrO2) or silicon nitride (Si3N4), depending on the application. They are available with full balls or with cages made of PEEK or PTFE. The runout accuracies common with precision steel bearings cannot be achieved with all-ceramic bearings, so speed values have to be reduced. Ceramic materials are harder than steel, but also more brittle. Silicon nitride in particular has a low elongation at break and tends to break under tensile stress without prior plastic deformation. We take this into account when selecting the optimum bearing solution for your specific requirements.

In a redecoration project for a house, changing the tiles of the kitchen and the bathroom is probably the first things that people tend to do. In addition, changing the tiles of the floor is another usual action that people want to do to renovate their homes. To have a perfect ceramic floor in your living room or a flawless tile wall in your kitchen, you need precise cutting discs in order to cut tiles with maximum precision. Ronix Ceramic Cutting Discs are great accessories for your ceramic cutting saws. With their high-quality and diamond tips, they ensure fast and clean cuts. These cutting wheels are ideal for having great cuts in ceramics, tiles and porcelains.

At TRADIUM, boron metal is available in the following forms for industrial use: - Boron powder - Nano boron - Borides: aluminium boride, magnesium boride, titanium boride, zirconium boride - Boron carbide - Boron nitride Your point of contact for boron is: Thomas Grob Phone: +49 (0)69 50 50 250 - 233 We are looking forward to hearing from you!