Elements- electric - Import export

The range of application for the high-precision resistance decades models 1406 and 1407 stretches from reference standard for precision measurements up to simulation ot a host of measuring transducers. They can be used for control in complicated equipments and systems, such as equivalent circuit in resistor networks. Another application is the use in switching circuits, as reproducible variable in laboratory and test assemblies. The decade resistors meet all the requirements of these differing functions as well as the resulting demands. The high-precision resistance decades models 1406 and 1407 are designed to meet the highest demands with regard to precision, temperature and long-term consistency. Many years at experience, tried-and-tested technology and the use of fieldproven materials guarantee the high level of precision. The decade resistors consist of low-capacity and low inductance wire windings of MANGANIN®.

In connection with very precise digital voltmeters the model 1282 resistors are used as measuring resistors for accurate registration of direct and alternating currents up to 200 A. The compact construction supports universal application. The exceptional low temperature coefficient extends the scope of application a second time. A typical application is the wide range of quality and reliability testing. Regular measurements give a reliable information of the quality level of parts, instruments and systems. Technologies already approved with our precision and calibration resistors - which especially guarantee a secure conduction of the dissipation heat - have been transferred to the precision high capacity resistors. Features: — Temperature coefficient ≤ 10 ppm/K — Nominal load 20 W — Ranges 1 mΩ ... 100 mΩ — Four-terminal measurement principle — Accuracy 0.02 % — For technical frequency 50 Hz

Precision resistors are used wherever the highest standards of temperature stability, error tolerance and durability are required. Models 1164 and 1166 are available for higher loads up to 1 W. The resistors are supplied with two connections on the front end (suitable for mounting on circuit boards). The precision resistors comprise low-capacitance, low-inductance wire coils made of MANGANIN®, which are encapsulated in small plastic cylinder housings. Prior to trimming, the resistance bodies are exposed to a meticulous artificial aging procedure. This special process and trimming to approximately half of the nominal tolerance guarantee long-term stability of < 0.02% over the course of years. FEATURES: — TC ≤ 10 ppm/K —Class ± 0.02 % or ± 0.05 % —Production range from 5 Ω ... 100 kΩ —Resistance material MANGANIN® —Custom resistance values available on request —Minimum order per resistance value 10 pcs

In its function as temperature simulator the decade offers the choice of sensors like Pt100, Pt200, Pt500, Pt1000, Ni 100 and Ni 1000 in the range from -200 °C up to +850 °C. The temperature is entered via keyboard or data interface. The corresponding resistance appears at the output socket in two, three or four wire method. The resistance decade allows a direct choice of resistances between 1 Ω and 1.2 MΩ. Depending on the ohm value the resolution can be chosen up to 0.00001 Ω. The selected resistance can be picked up via two or four wire method. The LCD display informs about chosen resistance or temperature, sensor type and control status. Features: — Resistance range from 1.00000 Ω to 1.200000 MΩ — Accuracy 0.005 % — Temperature coefficient < 1 ppm/K — Simulation of RTD (Pt, Ni) temperature sensors — Simulation accuracy 0.02 °C — 2, 3, 4 wire connection — USB/RS232 (IEEE488/Ethernet optionally)

Today resistance thermometers are one of the important precision and operating measurement instruments of technical temperature measurement. Fast and easy testing of display, control and recording devices in measurement and process engineering is essential. Fixed temperature values can easily be simulated according to the characteristic curves of Pt100, Pt500 and Pt1000 using the precision resistors calibrated in °C (the inscription also includes the resistance value in Ω). The small dimensions of the resistors allow the installation in measuring instruments or measuring circuits for comparison or control measurements. Features: — TK ≤ 10 ppm/K — More than 60 fixed temperature values from -200 °C ... +800 °C ex stock — Calibration in acc. with DIN EN 60751 n - 0.02 % tolerance for the models 1144-Pt 100, 1144-Pt 500 and 1144-Pt 1000 — ± 0.05 % tolerance for model 1146-Pt100 — Resistance material MANGANIN®

The 0.02 class calibration resistors excel in their modern design and small mechanical dimensions. Their ruggedness also ensures a long life. Calibration resistors of the 1240 series are used wherever very constant operating standards are required. Typical main areas of application therefore include: — When normal resistors prove to be too large scale — For test and calibration of resistance measurement devices — For tests on electrical temperature measuring equipment — For laboratory setup of a Wheatstone bridge — As shunt resistor for accurate current measurement — As part of standard equipment in research laboratories — For a large part of measurements in calibration laboratory. Features: — Range 10 μΩ ... 100 kΩ — Low capacitance and low inductance design — Suitable for direct current and technical frequencies — High stability < ± 0.01 % over years

Especially for high-cavity PET plastic injection moulding there are various industry standards of clamp-band nozzle heaters available. Most common are the Axial Clamp-Band Heater and the Two-screw Clamp-Band Heater. Our HotCoil cable heaters with clamp band represent a highly demanded and very flexible clamping system, especially for heating larger nozzles and bushings with high power. The size-variable customizable clamp bands counteract the heating's thermal-related "lifting ambition" during heat-up and thus effectively prevent a possible critical overheating. For an even better protection all HotCoil heating elements can also be provided with an integrated thermocouple. As alternative to our standard clamping mechanism with welded clamping elements a space-saving lug clamping mechanism can be supplied.

DURAVOLTA is a new developed flame retardant and heat stabilized Polypropylene, made in Germany. The main reason for developing this material was to offer a halogenfree material according to IEC 61249-2-21 with outstanding heat and electrical insulation properties. It unites very good technical values, high form stability and ecologically aspects with a very good price-performance-ratio. Advantages of DURAVOLTA •halogenfree according to IEC 61249-2-21 •outstanding RTI el von 120°C according UL 746B •very good electrical insulation properties by high resistivities and dielectric strength •non hygroscopic •very high chemical resistance •very good processing properties •RoHS and WEEE compliant •producable in thicknesses according your needs •recycable •made in germany

We are using CNC - technology for the laying of thin and insulated heating wires on a variety of carrier materials in order to manufacture all kinds of heating elements. We can work up to sizes of 2 x 2 m, and we can realize medium series (500 - 10.000pcs.) as well as high volume productions (up to 1 million pcs.). All voltages from 3,7V up to 480V are possible. With our elements we can reach temperatures of up to 200°C. Please do not hesitate to contact us!

Screw-in heaters are versatile and intended for heating liquid media in industrial and commercial applications. When selecting, the specific surface load permitted for the respective medium must be observed and checked by the customer. EHK G1 1/2 are mainly used to heat water and aqueous solutions. 3 tubular heating elements ø 8,5mm made of stainless steel 1.4404 resp. Incoloy 825 brazed in G1 1/2″ thread made of brass (lead free) or stainless steel. Connection to 230/400 V3 (N), rotatable stainless steel terminal box. Use e.g. in washing machines, dishwashers, tempering equipment, laboratory equipment. The heaters are also suitable for water heating with photovoltaics, primarily the EHK G1128xxx series. Combination with all common PV controls possible, stepless power output. Type EHK G112-A with built-in thermostat 0-95°C Type EHK G112-AB with built-in thermostat/limiter 30-80°C / 100°C Type EHK G112-U without integrated control unit

If you are looking for a very efficient heating solution tailored to your needs that comes with competitive prices and short delivery times, please contact Embro and get the best service and high-quality products Made in Germany and Made in Europe!

With our CNC-wire-laying technology is it very easy to integrate functions like heaters for Anti-Icing/De-Icing or surface sensors for detections of structural problems in carbon or glass fiber parts. We can manufacture dimensions up to 2500x8000mm.

Pre-fabricated STRATE AWASTATION service buildings are set up directly on top of shafts (STRATE AWALIFTSCHACHT) or optionally alongside shafts on concrete foundation blocks. Pre-fabricated solutions offer the possibility of housing system components e.g. shaft cabinets, control elements, electric systems and service connection so that they are easily accessible integrating further optional system components e.g. STRATE AWAaerob ventilation systems, operating data recording and remote transmission etc. One-piece pre-fabricated concrete building, suitable for road and crane transport with four threaded attachment and transport sleeves Re-siting of the service building is possible Inside walls: exposed concrete, painted with washable dispersion paint, colour according to customer wishes Outside walls: textured render, painted in colour according to customer wishes Floor: smooth concrete floor plate with openings for shaft cover, cable duct etc.

With our textile-based electric elements we offer a better solution for surface heating in comparison to classic silicone heater. Our elements heat up to 200°C, and they are lightweight and cost-efficient. We are capable of manufacturing components of sizes up to 2.140 x 1.800 mm. Please contact us to receive an offer.

Whether for use in a workshop, in living or working spaces – the combination of a robust construction, sound workmanship and discreet design harmoniously integrates in any environment, and the thermally insulated carrying handle makes the device quick and easy to transport. The desired temperature can be regulated as needed via the integrated infinitely variable thermostat of the TDS 50 M. For more targeted warmth, the heating capacity can be increased in two stages up to 9 kW. If required, the fan can also be used in sole fan operation without heating function. The TDS 50 M is powered by three-phase current, which is, however, not supplied to a conventional heating coil but to a durable PTC ceramic heating element integrated in this electric heater. In direct comparison, this does not only entail a more homogenous hot air current and a lower noise generation – the ceramic PTC heater battery also offers many additional assets.

Electric duct heater Electrical duct heater type “LEH-R” are intended for the heating of gaseous media. The main applications are the heating of air in ventilation - / air conditioning or heat-recovery installations. Wide use areas are applications of the process - / environment-technology i.e. at the catalytic afterburning of exhaust fumes or drying ovens or in the plastic - / textile or paper industry. Through a variable construction concept, diverse use possibilities emerge. The application of highly compacted electrical heating elements with high purity compacted magnesium oxide powder sheathed metal tube and the direct heat transfer at the medium to be heated leads to an efficient realization of the electric energy to thermal energy. Special materials of acid constant rustproof steel stand for the heating of aggressive media by disposal. Alternatively, the heaters can be delivered also in the materials INCOLOY, INCONEL, HASTELLOY and MONEL. The duct heaters essentially consist of the following main-components: Duct with adapters to flanges DIN EN 1092 Rod heating elements Temperature Sensors (Thermostat / Thermocouple / RTD) Electrical terminal box

EEx’e’ certified electric duct air heater EEx e T2 – T6 ATEX The “LEH-Exe” type electric heaters comprise a range of certified EEx e air duct heaters, custom built to meet client specifications and suitable for use in zone 1 &amp; 2 hazardous areas. The main applications are the heating of air in ventilation - / air conditioning or heat-recovery installations. Wide use areas are applications of the process - / environment-technology i.e. at the catalytic afterburning of exhaust fumes or drying ovens or in the plastic - / textile or paper industry. Through a variable construction concept, diverse use possibilities emerge. The application of highly compacted electrical heating elements with high purity compacted magnesium oxide powder sheathed metal tube and the direct heat transfer at the medium to be heated leads to an efficient realization of the electric energy to thermal energy. Special materials of acid constant rustproof steel stand for the heating of aggressive media by disposal. Alternatively, the heaters can be delivered also in the materials INCOLOY, INCONEL, HASTELLOY and MONEL. The duct heaters essentially consist of the following main-components: Duct with flat flanges Rod heating elements Temperature Sensors (Thermostat / Thermocouple / RTD) Electrical terminal box

Electric Air heater Electrical air heater type “LEH-A” are intended for the heating of gaseous media. The main applications are the heating of air in ventilation - / air conditioning or heat-recovery installations. Wide use areas are applications of the process - / environment-technology i.e. at the catalytic afterburning of exhaust fumes or drying ovens or in the plastic - / textile or paper industry. Through a variable construction concept, diverse use possibilities emerge. The application of highly compacted electrical heating elements with high purity compacted magnesium oxide powder sheathed metal tube and the direct heat transfer at the medium to be heated leads to an efficient realization of the electric energy to thermal energy. Special materials of acid constant rustproof steel stand for the heating of aggressive media by disposal. Alternatively, the heaters can be delivered also in the materials INCOLOY, INCONEL, HASTELLOY and MONEL. The air heater essentially consist of the following main-components: Process flange Rod heating elements Temperature Sensors (Thermostat / Thermocouple / RTD) Electrical terminal box

CSN ® Explosion proof cartridge heaters as direct heaters for liquids or gases in hazardous environment. These units are equipped with a heating bundle or a replaceable ceramic heating element. For temperature control these heaters are available with an integrated temperature monitoring system. These devices are available in various material grades. The electric cartridge heating element type 93./..EEx….T.(.) is designed for the heating of liquids in the zone 1 and zone 2. The standars elements, mentioned in this list are suitable for DGRL (code 2014/68/EU) Art. 4, Para. 3. The elements can be suited (on request) to other uses requiring another classification according to DGRL Further information about our CSN® ExCartridge Heater

WRW/SRW – Double column Double column wall mounted stand mixer/floor stand mixer Rigid stand for wall-mounting or floor stand for mixers from 100 kg. The stand consists of 2 u-shaped columns with a ball-borne support slide with a cantilever beam for the mixer. The double-column stand allows the processing of tank volumes up to 4 m3, depending on the tank dimensions. Mixer powers up to 75.0 kW and support loads up to 1,000 kg can be realized. Under these conditions, the stand can be equipped with all fast running or gear-reduced mixers and their matching agitator elements. The lift is done electrically by a lift drive and chain drive. The electric supply is guided through a laterally mounted energy chain. Customized solutions for instance a stand mixer with H foot or stand equipped with coaxial agitator type KRK are feasible.

Double column wall mounted stand mixer/floor stand mixer Rigid stand for wall-mounting or floor stand for mixers from 100 kg. The stand consists of 2 u-shaped columns with a ball-borne support slide with a cantilever beam for the mixer. The double-column stand allows the processing of tank volumes up to 4 m3, depending on the tank dimensions. Mixer powers up to 75.0 kW and support loads up to 1,000 kg can be realized. Under these conditions, the stand can be equipped with all fast running or gear-reduced mixers and their matching agitator elements. The lift is done electrically by a lift drive and chain drive. The electric supply is guided through a laterally mounted energy chain. Customized solutions for instance a stand mixer with H foot or stand equipped with coaxial agitator type KRK are feasible.

At our sites in Rothenburg/Saale, Hamm, Brandenburg and Nedri Industriedraht (Hamm), we manufacture iron and fabrication wire for the machine, plant and steel construction industry, shopfitting, displays, automotive, furniture industry, household goods, chains, blasting material, tool carriers, filter industry, fence construction, garden and landscape design, connecting elements, logistics, construction industry, electrical and cable industry, bent wire parts, household appliances and gastronomy, animal husbandry, welding technology, lightning protection systems, gabions, packaging industry.

The pressure transmitter DMP 331P was designed for use in the food and pharmaceutical industry. The compact design with hygienic process connections makes it possible to achieve an outstanding performance in terms of accuracy, temperature behavior and long term stability. The modular construction concept allows a combination of various process connections with different filling fluids and a cooling element. Several electrical connections complete the profile of DMP 331P. Features: — nominal pressure: 0 ... 100 mbar up to 0 ... 40 bar — accuracy:0.35 % (opt. 0.25 %) FSO — hygenic version — diaphragm with low surface roughness — CIP / SIP cleaning up to 150 °C — vacuum resistant Optional Features: — IS-Version Ex ia = intrinsically safe for gases and dusts — SIL 2 according to IEC 61508 / IEC 61511 — cooling element for media temperatures up to 300 °C — diaphragm in Hastelloy® or Tantalum

The machine of series KT can be applied universally. It is designed for the industrial part cleaning. Application fields: metal degreasing, electrical industry, optical industry, medical technology, maintenance and service etc. The compact design of the machine as 3-tank system guarantees a high cleaning quality together with space-saving location. The basic version consists of a heated ultrasonic tank (tank 1) and heated cascade rinsing (tank 2 and 3). Additionally a separate dryer corresponding to the size of the compact unit can be made available. The tanks are incorporated in a solid frame. Optionally a stainless steel base frame can be delivered. Armatures, tank and frame are made of stainless steel. All valves can be easily operated at front of the machine. All electrical operating elements are on the front of the machine. They are each assigned to the tanks.

SIM Automation, your partner in - autonomous driving - electromobility - connected car - electric pumps - operating elements - door locks - instruments - airbag inflators and igniters - gearboxes Development of part-feeding systems and test systems. Assembly and inspections lines that we've already developed: - Airbag inflators - Intercoolers - Oil pumps - Door and trunk locks - Instrument components - Vehicle components for driver assistance systems - Step motors and servo motors - Quick-release clutch systems - Gearbox balance shafts (for checking run-out accuracy and backlash) Assembly lines we have been involved in: - Lighting components (H7 / Xenon / LED) - Safety belt height adjuster - Heatable windscreen washer jets Testing and inspection lines we have been involved in: - Electric high-performance gear components (up to 6 kV) - Electric central locking systems (vehicles)

Angle position measurement by means of Hall sensors and signal processing including generation of the analogue output signal. Robust brass housing – stainless steel shaft with sliding bearing – sensor circuit consisting of ASIC with Hall elements – electrical connection via connector.

Recording of the angular position and revolutions by means of Hall sensors - multiturn version with absolute transmission for up to 4096 revolutions - data output plus parameterisation and diagnosis via Profibus-DP. Robust housing manufactured from seawater-proof aluminium or stainless steel - stainless steel shaft - ball bearing with radial shaft seal - sensor circuit consisting of ASIC with Hall elements - electrical connections via the connecting cap with threaded cable connections. The absolute encoders are designed for direct connection to the PROFIBUS-DP. The interface is implemented with the SPC3 Siemens PROFIBUS controller. The protocol corresponds to DP-Slave Class 2 functionality in accordance with Profibus profile for encoders, No. 3.062, and is described in detail in the TRD 12770 user manual. The TRD is mechanicallly and electrically compatible with the electro-optical encoder CRD.

Recording of the angular position and revolutions by means of Hall sensors - absolute multiturn transmission for up to 4096 revolutions - data output plus parameterisation and diagnosis via EtherCAT. Robust housing manufactured from seawater-resistant aluminium or stainless steel - stainless steel shaft - ball bearing with radial shaft seal-sensor circuit consisting of ASIC with Hall elements - electrical connection via M12 connector or cable outlet. In the model series TRK absolute encoders, the EtherCAT interface is integrated according to IEC 61158-2 to 6 and encoder profile CiA DSP406. To achieve the SIL2 level, the TRK/S3 contains a redundant sensor system and additional internal monitoring mechanisms as well as safe communication via the FSoE (failsave over EtherCAT) protocol. The FSoE protocol is implemented according to the Safety over EtherCAT specification ETG.5100 version 1.2.0.

Recording of the angular position and revolutions by means of Hall sensors - multiturn version with absolute multiturn transmission for up to 4096 revolutions - data output plus parameterisation and diagnosis via PROFINET. Robust housing manufactured from seawater-resistant aluminium or stainless steel - stainless steel shaft - ball bearing with radial shaft seal-sensor circuit consisting of ASIC with Hall elements - electrical connection via M12 connector or cable outlet. The Profinet interface according to IEC 61158 / 61784 or PNO specifications order No. 2.712 and 2.722, version 2.2, is integrated into the model series TRT absolute encoders. Real time classes 1 - 3 are supported, i.e. Real Time (RT) and Isochronous Real Time (IRT) plus the requirements of conformance class C. Setting the address, baud rate or terminating resistances is not necessary. A name, which is stored in the absolute encoder's non-volatile memory, is assigned via the PROFINET controller to address the device.