Heating equipment - Import export

Infrared Heaters - Highly efficient infrared-technology. Economical heating, exactly on point, with Schultze Infrared-heaters. Specially designed halogen heating elements emit short-wave infrared and provide instantly noticeable comfort heat, similar to the sun. Heating people directly without the need to build up and maintain a body of warm air is economical and flexible as well, especially for applications like outdoors, with high ceilings or huge spaces. The field of application includes for example work-shops, sport-facilities, pub gardens, patios, but also industrial or commercial appliances like drying paint or heating machinery. The HA-series are IP22 rated for indoor use and provide the most economic means of heating intermittently used buildings. The case includes M6 holes for optional suspension.

ELECTRIC HEATER FAN TDS 755-10-15 – solid three stage heating power up to 15 kW A true power pack, the electric heater fan TDS 75 cuts a remarkably fine figure even with large-volume heating tasks. And not by chance, but exclusively made by Trotec. And since our distinctive logo has been printed on the outside, we have also incorporated convincing extras inside, which make all the difference to conventional standard electric heater fans. In addition to common equipment features such as a fan motor provided with thermal protection or a reliable overheating protection, the electric heater fan TDS 75 comes equipped with further practice-oriented features, e.g. an integrated air baffle, which optimally leads the warm air flow outside and initiates maximum efficiency, or trapezoidally mounted carrying handles, on which the electric heater fan can be stably stacked a number of times.

OIL HEATER FAN IDE 50The indirectly fired oil fan heater IDE 50 ensures clean, dry hot air Indirectly fired air heaters such as the oil heater fan IDE 50 are an ideal solution to provide large amounts of clean and dry hot air, as it is required for the heating of construction sites, marquees, exhibition halls, workshops or stables. Longer outdoor applications are no problem for the oil heater fan IDE 50, because it is provided with a durable housing made of doubly coated material, borne by a smooth-running carriage construction with cable holders and installed fuel tank. When employing the optionally available flue gas discharge, this heating device can also be flexibly used for the fully automatic heating of closed rooms.

OIL HEATER FAN IDE 60 DThe integrated fuel tank makes the high-performance direct oil heater fan IDE 60 D our best recommendation for use on construction sites, in halls and so forth! Whether for direct permanent heating in agriculture and production, on construction sites or in storage facilities – there are many typical standard oil heating tasks where sound technology with ideal value-for-money ratio and a high 60 kW heat output is called for. Our response: The oil heater fan IDE 60 D. This ready-for-use heating device is a particularly efficient directly fired oil heater fan and due to its durable housing made of doubly coated material is optimally prepared for various heating applications in well-ventilated areas. In the course of this, the IDE 60 D’s large air outlet ensures a maximum expansion of warm air with a high efficiency level of 100 %.

Because the oil heating units come with an integrated fuel tank you won’t need any cumbersome or bulky external fuel tanks, giving you even more freedom and mobility when it comes to choosing the right place for installation. The light yet sturdy undercarriage with extra-large wheels allows you to transport and install the units quickly and easily and because the units are so mobile they can be quickly and easily moved around building sites and over rough and bumpy terrain, even single-handedly if need be. The units’ solid and strikingly simple construction guarentees a reassuringly high level of reliability and a blissfully low level of maintenance. Needles to say safety is always first and foremost with the oil heating units in the IDS Series: The units are standard-equipped with an electronic flame safeguard, safety thermostat for overheat protection and fully automatic aftercooling.

Heating of all kinds of liquids and gases, especially suitable for installation in hazardous areas (ex. areas). Continuous heating by means of heat exchange between the tubular heating elements and the medium. We are experts in customizing process heaters always ensuring to deliver solutions which will be both technically and economically sound.

Whether it’s for maintaining stable temperatures in storage tanks, compensating of heat loss in supply pipes, liquefying firm substances such as wax or vaporizing water or thermal oils, electrical heaters by Klöpper Therm are the answer. Our heaters provide optimised, energy efficient and reliable process control for all kinds of plants – chemical, petrochemical and pharmaceutical – as well as power plants and refineries. Based on the client’s specifications, we verify the technical feasibility for each application and transforms it into a concrete design.

IDS 20 D Oil Fired Direct Heater The IDS 20 D shows mobile heating power with 100 % effectiveness - exactly where you need it. It is completely made in Europe and it is the perfect fit for heating stables with high air flow or construction sites in the winter. Convincing practical advantages: Integrated oil burner with Danfoss® pump Electronic flame safeguard Overheat thermostat Stainless steel combustion chamber Fully automatic aftercooling Double-walled housing for optimal soundproofing and noise insulation Integrated fuel tank Available accessories: External thermostat for fully automatic operation Tank level indicator (available on request) Oil filter filler neck (available on request) More technical data of the IDS 20 D: Heating capacity: 20 kW Air flow: 350 m³/h Input voltage: 230 V / 50 Hz Current consumption: 1 A Fuel consumption max.: 2.04 l/h Tank capacity: 17 litres Length x width x height: 720 x 300 x 450 mm Weight: 20 kg

InduStrip EZ2 radiant heaters are suitable for full or auxiliary heating of rooms with large volumes and high ceilings. These radiators are for commercial use like in department stores, warehouses or industrial buildings. The heating elements emit no light and thanks to the clear design, the EZ2 inconspicuously integrates into the electrical installation. Recommended mounting height up to 3.5m.

InduStrip IHS radiant heaters are suitable for full or auxiliary heating of rooms with large volumes and high ceilings. These radiators can also be used outdoors like on sports stands or loading ramps to keep them dry and frost-free. Robust industrial design, galvanized steel casing, high-gloss aluminum reflectors.

Infrared Heaters - Highly efficient infrared-technology. Economical heating, exactly on point, with Schultze Infrared-heaters. Specially designed halogen heating elements emit short-wave infrared and provide instantly noticeable comfort heat, similar to the sun. Heating people directly without the need to build up and maintain a body of warm air is economical and flexible as well, especially for applications like outdoors, with high ceilings or huge spaces. The field of application includes for example work-shops, sport-facilities, pub gardens, patios, but also industrial or commercial appliances like drying paint or heating machinery. The HWP2-series is dust- and water-jet tight complying with IP55 rating. HWP2 heaters are a stylish means of providing comfort heat in outdoor or indoor locations

Screw-in heaters are versatile and intended for heating liquid media in industrial and commercial applications. When selecting, the specific surface load permitted for the respective medium must be observed and checked by the customer. EHK G2 are mainly used for heating hydraulic oil in containers in which the replacement of the heating cartridge without draining the medium must be possible. Ceramic heating cartridge in stainless steel tube ø 50mm, material-no. 1.4512 or material-no. 1.4404. G2″ thread SW70 welded from V2A. Terminal box made of PA6-GF30, impact-resistant and oil-resistant, degree of protection IP66/67. Unheated zone 50mm, surface load 1,5 W/cm², voltage 230/400 V. Special versions on request.

Screw-in heaters are versatile and intended for heating liquid media in industrial and commercial applications. When selecting, the specific surface load permitted for the respective medium must be observed and checked by the customer. EHK G1 1/2 are mainly used to heat water and aqueous solutions. 3 tubular heating elements ø 8,5mm made of stainless steel 1.4404 resp. Incoloy 825 brazed in G1 1/2″ thread made of brass (lead free) or stainless steel. Connection to 230/400 V3 (N), rotatable stainless steel terminal box. Use e.g. in washing machines, dishwashers, tempering equipment, laboratory equipment. The heaters are also suitable for water heating with photovoltaics, primarily the EHK G1128xxx series. Combination with all common PV controls possible, stepless power output. Type EHK G112-A with built-in thermostat 0-95°C Type EHK G112-AB with built-in thermostat/limiter 30-80°C / 100°C Type EHK G112-U without integrated control unit

Convincing practical advantages: Integrated oil burner with Danfoss® pump Electronic flame safeguard Overheat thermostat Stainless steel combustion chamber Fully automatic aftercooling Double-walled housing for optimal soundproofing and noise insulation Integrated fuel tank Available accessories: External thermostat for fully automatic operation Tank level indicator (available on request) Oil filter filler neck (available on request) More technical data of the IDS 30 D: Heating performance: 38.4 kW Air flow: 605 m³/h Mains voltage: 230 V / 50 Hz Power: 1.25 A Fuel consumption max.: 3.66 l/h Tank capacity: 42 litres Length x width x height: 1.050 x 400 x 520 mm Weight: 25 kg

The possibility for wall mounting or installation under the ceiling open wide range of application possibilities, e.g. for heating of building container, marketplaces, greenhouses, small storages, garages, workshops, boathouses or at installation applications. Benefits in pratice: 100% TROTEC - development, design, production Multistage temperature control with up to 3 heating stages Integrated room thermostat for constant, cosy warmth Overheat protection 10% more power than competitive models Fan motor with thermal protection Condensation-free heating - no oxygen consumption - because of that the TDS 30 is suitable for uses in enclosed rooms Standard built-in air baffle for optimization of heat dissipation (guarantees maximum efficiency) Fan function

The Oil Heater of the IDE series are budget saving solutions with solid technology for typical standard heating tasks with direct warmth on site. For heating applications outdoors the Oil Heater of the IDE series are best prepared thanks to the sturdy housing made of double painted material. The large air outlet guarantees a maximum warm air expansion with high efficiency, which is 100 % at the direct fired models. For a desired temperature adjustment all IDE devices have an integrated thermostat. If the temperature should be measured and controlled at a place with a distance of 25 meters away from the heater, you can use the optionally available extern thermostat. The fuel level of the integrated fuel tank can be read off on the fuel level display. Benefits in practise: Very economical solution for standard oil heaters Integrated fuel tank with fuel level display Electronic flame safeguard Overheating protection Stainless steel fire combustion chamber

Wherever condensation free warmth is needed without long air transportation ways, on site and immidately effective, the favourable electric heating units of the TDS R series are best choice. Because in comparision to direct fired gas or oil heaters dont consume oxygen and produce no combustion gases, they are well suited for temperature management of unheated inside rooms, workshops or garages. Thanks to the integrated thermostat control the produced warm air flow can be adjusted continuously to the desired temperature. If needed, the heating elements of the TDS 30 R switch on thermostatic controlled additional to the constant fan. Benefits in practise: Multistage temperature control with up to 3 heating stages Integrated room thermostat for constant, cosy warmth Overheat protection Fan motor with thermal protection Condensation-free heating - no oxygen consumption - because of that the TDS 30 R is suitable for uses in enclosed rooms Easy transportable and easy to use

Here, an overview of some practical benefits of the TEH 100: Extra thermally insulated hose connections with supporting ring for extra grip Extremely easy-maintenance construction Very low heating of outer sheath Tried and tested German industrial design - protected prototype Multistack capability Robust TEH 100 electric heater - Some technical details: Heat output in kW: 9 - 13.5 - 18 Heat output in kcal: max. 15.400 Amount of air: 1.785 m³/h Temperature increase ΔT: 38 °C Power consumption: 27,2 A Power socket: 32 A / CEE plug Supply voltage: 400 V / 50 Hz Thermostat: Accessory Mobility: Wheels Sound level: 69 dB (A) Length x width x height: 400 x 400 x 480 mm Weight: 29,5 kg Hose connection: 300 mm

IDS 80 OIL HEATER FANThe robust IDS 80 oil fan heater for fast, uncomplicated heating - mobile heating power on wheels This oil heater fan of the IDS pro series is especially suitable for longer heating applications, because it is possible to connect an external oil tank in addition to the integrated fuel container. The double-walled housing with protective coating ideally absorbs sound, minimizes surface temperature and thus the risk of injuries. Electronic flame trap, safety thermostat for overheating protection and fully automatic after-cooling are further safety measures. The carriage and big wheels provide sufficient flexibility. Especially when working on building sites, the location can simply be changed. The oil heater fan IDS 80 further comes with a connection facility for an air transport hose and a two-way hose distributor.

ELECTRIC HEATER FAN TDS 19 EFiery red mobile heater as a convenient all-round solution The red electric heater fan does not only have a fiery look, but also presents the ideal heating solution for construction trailers, indoor market stalls or smaller workshops. For the TDS 19 E can be employed at basically all locations where the use of oil and gas heating devices is undesirable or even prohibited, such as in unheated rooms. Thanks to the integrated power cable, all it takes to operate the mobile heater is a socket. The warm air flow generated by the TDS 19 E can be infinitely adjusted to the exact desired temperature, and its heat output can be regulated as needed using the two-stage power control. Beyond that, fan operation without heating function is also possible.

ELECTRICAL SPACE HEATER TDS 120 RProfessional heating for large building areas: With the TDS 120 R and a full 30 kW heating force Owing to 30 kW of heating power, the most powerful model of the TDS-R series comes with convenient spare capacity for the permanent heating of larger rooms and is hence especially suited for temperature control in larger building sections. Accommodated in a comfortably transportable and stable carriage construction with ball-bearing wheels, the fully galvanized, coated steel sheet housing of the electrical space heater TDS 120 R houses high-quality corrosion-protected stainless steel heating elements, which immediately after switching on generate formidable heat flowing out in large volumes via the powerful air circulating follow-up fan. The desired temperature can be regulated as needed via the integrated infinitely variable thermostat and the heating capacity can be increased in two stages up to 30 kW for maximum selected warmth.

IDS 30 OIL HEATER FANMobile heating power on wheels: The IDS 20 D direct heaters for fast, uncomplicated heating With robust design, the oil heater IDS 30 has everything you need for an economic and effective heating application. This device from the IDS pro series is very flexible. On the one hand, its carriage with big wheels enables a quick transport and easy set-up even on building sites and uneven terrain. On the other hand, there is no need for an external oil tank because of the integrated fuel container. The oil heater fan is originally "Made in Europe" and as standard equipped with electronic flame trap, safety thermostat for overheating protection and fully automatic after-cooling. Additionally, the double-walled housing with protective coating increases safety at work by minimizing the surface temperature of the outer casing and thus the risk of injuries and further offers an effective soundproofing.

IDS 45 OIL HEATER FANThe robust IDS 45 oil fan heater for fast, uncomplicated heating - mobile heating power on wheels The professional heater fan IDS 45 is suited for an uncomplicated and quick heating of storage spaces, workshops, building sites, green houses or stables. Thanks to the integrated oil burner with Danfoss® pump it operates economically and effectively in every heating application. Owing to its robust design and convenient carriage, the device can quickly be transported from A to B by one person only and thus enables a quick change of location. Safety is the top priority of the oil heater manufactured in Europe. The housing is double-walled and with its protective coating provides an optimum soundproofing while simultaneously minimizing the surface temperature of the outer casing and thus the risk of injuries for the user.

ELECTRIC HEATER FAN TDS 120The thermal power plant among the TDS electric heater fans With a hefty 30 kW of heating power the TDS 120 is the undisputed No. 1 among the popular TDS electric heater fans from Trotec and offers you convenient spare capacity for the permanent heating of larger rooms or for temperature control in large-volume building sections. Owing to the integrated thermostat control, the generated warm air current can be infinitely adjusted to the desired temperature and regulated in line with demand via a two-stage power control for space-filling temperature control. And since our distinctive logo has been printed on the outside, we have also incorporated distinct extras inside, which make all the difference to conventional standard electric heater fans.

Whether for use in a workshop, in living or working spaces – the combination of a robust construction, sound workmanship and discreet design harmoniously integrates in any environment, and the thermally insulated carrying handle makes the device quick and easy to transport. The desired temperature can be regulated as needed via the integrated infinitely variable thermostat of the TDS 50 M. For more targeted warmth, the heating capacity can be increased in two stages up to 9 kW. If required, the fan can also be used in sole fan operation without heating function. The TDS 50 M is powered by three-phase current, which is, however, not supplied to a conventional heating coil but to a durable PTC ceramic heating element integrated in this electric heater. In direct comparison, this does not only entail a more homogenous hot air current and a lower noise generation – the ceramic PTC heater battery also offers many additional assets.

The unique and mobile all-rounder for professional H14 HEPA air purification, high-performance room heating, thermal decontamination and thermal disinfestation Heat, treat, repeat. Our vertical heater exclusively available at Trotec: HighPerformance for four different applications The concept of a basic device that can be combined with variable equipment variations – all "made in Germany" – makes the TAC XT an ultimate air handler offering a brand new range of applications, and therefore the maximum investment security possible. 18 kW heating capacity (27 kW optional), a ventilation performance up to 2,500 m³ that can be adjusted by means of several stages and an outlet temperature that can be flexibly set to 75 °C max. make the TAC XT an optimal device for many specific tasks: High-performance air purification and virus filtration Fully automatic room heating with or without HEPA air purification Thermal disinfestation Thermal decontamination of rooms and surfaces

The infrared heating panel TIH 900 S supplied in TÜV-tested quality comes with all the references to be expected of a branded heating panel. This includes i.a. the efficient heating procedure with environmentally sound IR-C radiation, where 100 % of the electrical energy input is converted into heat output. Moreover, the TIH 900 S generates a cosy and clean warmth – without noises, smells, condensate or the unpleasant circulation of dust. For like the sun the heating panel generates direct heat by means of infrared radiation, which does not heat the ambient air, but rather all the items in the room (besides persons also walls, ceiling, floor and furniture) which then gradually emit the stored heat into the room.

Being a powerful rapid heater, the compact TDS 20 M is ideally suited for quickly heating cold rooms in the time between seasons or on particularly cold days. Whether for use in a workshop, in living or working spaces – the combination of robust workmanship and discreet design leaves a good impression in every environment. And the thermally insulated carrying handle makes it easy to transport the device from one site of application to the next. Instead of heating wire technology, the TDS 20 M uses an advanced PTC ceramic heating element for heating the air. Advantages of PTC as compared to heating wires: longer lifetime, less sensitive technology, shorter heat-up times, process-related overheating protection – and no burning of dust during heating, which additionally makes this ceramic heater suitable for allergy sufferers.

TDS 100 Electric Fan Heater The TDS 100 electric heater provides a heating performance between 11 kW and 22 kW in 3 stages (stage 1 only fan). Furthermore the TDS 100 has an integrated thermostat for continously adjusting of the desired temperature. Benefits in pratice: 100% TROTEC - development, design, production Multistage temperature control Integrated room thermostat for constant, cosy warmth Overheat protection Fan motor with thermal protection Condensation-free heating - no oxygen consumption - because of that the TDS 100 is suitable for uses in enclosed rooms Wall and ceiling bracket available - mounting is available as an accessory Fan function Place-saving stackable Fields of application: Building container Garages Gastronomy Greenhouses Marketplaces Storerooms and workshops Boathouses Workshops Shipbuilding and counting...