Industrial cutting machine tools - Import export

• 2.4 mm up to 6.4 mm Ø alu and copper • Up to 6 mm Ø steel & 5 mm Ø stainless steel • Up to fl ange diameter 11.4 mm • Rivet body lengths above 30 mm • Traction power up to 11,770 N (6-7 bar air pressure) • Cost effective from an annual quantity of around 500.000 blind rivets (related to the german market) • Up to 50 % time and costs savings compared to standard blind rivet devices • Rivet pistol has a large action radius • No trained personnel required for operation • Can be easily integrated into fully-automatic production systems • Up to 40 blind rivets can be processed every minute • Electronic system controls • Maintenance display & simple fault diagnosis • Customer-specifi c software modifi cation is possible • Rivet mandrels are disposed of by vacuum system • Optional Spring loaded trigger system • Interface for external memory programmable control system (SPS) can be realised via GESIPA® interface

Specifications: Stroke rate: continuously variable up to max. 250 1/min. Press: nominal stamping capacity 300 kN, stroke 12 mm Servo units: max. nominal forming capacity 40 kN, max. stroke 100 mm Feed length: any feed pitch Material: max. strip thickness: 4 mm, max. strip width 90 mm, max. wire Ø 4 mm Dimensions: width 3,282 mm x depth 1,820 mm x height 3,055 mm Weight approx. 9,500 kg (without tooling)

Specifications: Stroke rate: continuously variable from 5 to max. 250 cycles/min. Press: nominal punching capacity 300 kN, stroke 16 mm Slide units: max. nominal forming capacity 90 kN, max. stroke 95 mm Feed pitch: mech. feed: max. 500 mm, with feed cycle reduction, servo feed: any feed pitch Material: max. strip width 80 mm, max. wire-Ø 6 mm Dimensions: width 3.140 mm, depth 1.583 mm, height 2.220 mm Weight: approx. 3.000 kg (without tooling)

Specifications Stroke rate: continuously variable from 5 to max. 150 1/min. Press: nominal punching capacity 600 kN, stroke 20 mm, nominal punching capacity 700 kN, stroke 16 mm Slide units: bell-crank lever unit: max. nominal forming capacity 160 kN, max. stroke 140 mm, standard slide unit: max. nominal forming capacity 120 kN, max. stroke 100 mm Feed pitch: mech. feed: max. 350 mm, with feed cycle reduction (crosswise), mech. feed: max. 150 mm, with feed cycle reduction (lengthwise), servo feed: any feed pitch Material: max. strip width 160 mm (lengthwise), 320 mm (crosswise), max. wire diameter 10 mm Dimensions: width 3.580 mm, depth 2.670 mm, height 2.610 mm Weight: approx. 10.000 kg (without tooling)

Specifications: Stroke rate: continuously variable from 5 to max. 350 1/min. Press: nominal punching capacity 90 kM, stroke 12 mm Slide units: max. nominal forming capacity 60 kN, max. stroke 40 mm Feed pitch: mech. feed: max. 240 mm, with feed cycle reduction, servo feed: any feed pitch Material: ax. strip width 60 mm, max. wire-Ø 4 mm Dimensions: wid.020 mm x depth 1.330 mm x height 2.030 mm -Weight:approx. 2.000 kg (without tooling)

The multi-function unit is a universal C-shaped stationary machine designed for sheet metal utilising industries as a machine for every situation. In respect to working with sheet metal and profiles in aluminium, steel or stainless steel many demands are realised with the multi-function unit MFG 500/150 E. Accordingly the machine is used for clinching, self-piercing riveting, punching, pressing-in and embossing. However a new machine is not needed every time but merely an appropriate tool holder is inserted and the machine is ready for a further task. You can also choose from standardised tool holders or a custom-manufactured tool holder according to your needs. Required tools (punches and dies) and tool holders are not included in the scope of delivery. They must be chosen separately, based on the actual task. Contact us for a customised offer, tools included!

The Professional Line punching machines by EHRT are characterised by their outstanding robustness even under high loads. With the Professional machines a three-shift operation, for example, is not an issue. This machine is fitted with three CNC controlled axes, allowing for production parts to made with virtually perfect accuracy. No additional employees are needed to adjust the machine, which saves a significant amount of time. The operator is only responsible for starting the machine, feeding in the material and then removing the production parts. Feeding in the material and removing the production parts can be further automated. This makes the machines extremely cost-effective. Software solutions from EHRT enable a customised and smooth production flow of punching machines. In addition, the punching machine can be optimally linked with the bending machine so that production can be carried out based on a single production file from a common database.

The new FlexPunch series features a very flexible and modular system. Each machine can be adapted to the customer’s individual requirements via individual components. The FlexPunch series is equipped with three CNC controlled axes, allowing for production parts to made with virtually perfect accuracy. No additional employees are needed to adjust the machine, which saves a significant amount of time. Through additional options, however, the processes of feeding the material and removing the production parts can be further automated. This makes the punching machines extremly cost-effective. EHRT's software solutions enable a customised and smooth production flow of punching machines. In addition, the punching machines can be optimally linked with the bending machines so that production can be carried out based on a single production file from a common database.

The Professional Line punching machines by EHRT are characterised by their outstanding robustness even under high loads. Running a three-shift operation, for example, is not an issue. The Punching Machine Professional Series is fitted with three CNC controlled axes, allowing for production parts to made with virtually perfect accuracy. No additional employees are needed to adjust the machine, which saves a significant amount of time. The operator is only responsible for starting the machine, feeding in the material and then removing the production parts. Feeding in the material and removing the production parts can be further automated. This makes the machines extremely cost-effective.

The new FlexPunch series features a very flexible and modular system. Each machine can be adapted to the customer’s individual requirements via individual components. The FlexPunch compact is the smaller version of the two and is particularly suited for production sites with limited space. The FlexPunch series is equipped with three CNC controlled axes, allowing for production parts to made with virtually perfect accuracy. No additional employees are needed to adjust the machine, which saves a significant amount of time. The operator is only responsible for starting the machine, feeding in the material and then removing the production parts. Feeding the material and removing the production parts can be further automated. This makes the punching machines extremely costeffective.

In stamping technology, many very different technologies can be integrated into the stamping process, such as assembling two or more parts, contact riveting, resistance and laser welding, laser marking of parts, or thread forming. Our high-precision tools, thereby, create a basis for production that is, over its lifetime, very high quality and economical. The stamping process is accompanied by a 100 % quality control of the functional design dimensions.

The KSM 125 and KSM 130 edge grinding machines are designed for deburring and edge cutting of small to big workpieces starting with a thickness of 2 mm. The chamfer is scrubbed and finished in one step with our two-zone grinding disc. The chamfer setting is made by opening / closing the prism. This is used effectively and efficiently through the axial adjustable corundum grinding disc. The KSM 125 has an integrated extraction socket for connection to an extraction system. A water cooler is installed in the KSM 130. The machines are equipped with hardened and polished guide rails. Hardened workpieces and HSS materials can be processed p to 5mmx45° in multiple steps. For longer workpieces or serial part production, we recommend optimizing the feed unit with pressing pressure, surface quality, feed speed and service life of tools. The machines can be installed on an undercarriage for flexible use in a workshop.

AF 165 is a tabletop device for the lightning-fast and efficient removal burrs. Faceting and deburring machine with fixed angle of 45° and gradually set chamfer width for all metals. Its special area includes the removal of saw burrs and roughing burrs so that workpieces can be further processed and are safe to use. Fast, cost efficient edge grinding is achieved by durable flap disks, CBN- or diamond grinding wheels. Advantages: Can be used for steels, aluminium, brass, copper, plastics, from soft plastics to acrylic glass, wood and much more. For hardened steels CBN wheels For hard metals Diamond discs Uncomplicated tool change Easy operation

BKE 550 is a table or permanent device for extremely fast, double-sided deburring of sheet parts from all metals (including stainless steel), up to approx. 5 mm sheet-metal thickness, in a single step. The BKE 550 sheet deburring machine is for the highest demands in effective, fast and safe deburring. The double-sided deburring of sheets is guaranteed through the machine construction with two finned grounding wheels, which are installed directly on motor shafts that run opposite. Smaller and handy workpieces can be placed and processed with a horizontal table. Large metal sheets and strips can also be deburred with a vertical table. Advantages: Deburring of sheets on both sides Sheet thickness 0-4mm Can be used for small sheets in horizontal operation and large sheets in vertical operation Flap wheels for steel or stainless steel with different grit sizes

The automatic weld chamfering machine ASO 920 is for portable use in weld seam preparation. The attachment of large welded chamfers on the workpiece upper edge up to a chamfer length of 90mm can be performed by the machine effortlessly without any thermal change to the material, because the heat dissipation occurs through the chip. V, X, K, U or Y seams can be prepared thanks to the gradual angle adjustment from 0° - 30°. The highlight here is the machining preparation of a tulip seam. The machine is very durable and shows its’ strength in every material through their sturdy construction. Extremely high tool service life can be achieved with the low-speed chamfering. Sheet thickness started at 8mm can be processed. Advantages: Easy to adjust to material thickness, chamfer angle and working height Cutter head can be set in Z and X-axis No change to material properties, through heat dissipation via chip V-, X-, K-, U- or Y- seams possible

The automatic recess chamfering machine ASO 910 is for welded seam treatment of, for example, duplex steel. The recess chamfering or resetting of cladding is mastered excellently by the edge chamfering machine. The attachment of chamfers on the top edge of the workpiece is possible up to 65mm. Thanks to the gradual angle adjustment from 90° - 75°, clean transitions are created between two workpieces with different thicknesses. The machine is very durable and shows its’ strength in every material through their sturdy construction. Extremely high tool service life can be achieved with the low-speed chamfering. Sheet thickness started at 8mm can be processed. The front, top and/or bottom side can be processed in one step through a special shape chamfer. Cavities in the front can be chamfered using the disc groove cutter. Advantages: Easy to adjust to material thickness, chamfer angle and working height Cutter head can be set in Z and X-axis No thermal change to the material

The automatic weld-chamfering machines from the ASO 930 series are for stationary and portable use in weld seam preparation. The attachment of large welded chamfers on the workpiece bottom edge up to a chamfer length of 74mm can be performed by the machine effortlessly without any thermal change to the material. V, X, K or Y seams can be prepared thanks to the gradual angle adjustment from 0° - 75°. The machines are very durable and show their strength in every material through their sturdy construction. Extremely high tool service life can be achieved with the low-speed chamfering. Sheet thickness started at 8mm can be processed. Smaller workpieces can be processed manually. Advantages: Easy to adjust to material thickness, chamfer angle and working height No thermal change to the material V-, X-, K-, I- or Y- seams possible Very long operating life and cutting performance Gradual feed adjustment depending on material from 0 - 1.

The small and compact edge processing machine with sliding carriage is designed for chamfering and grinding small to medium-sized workpieces starting with a thickness of 1 mm. The light aluminium casing, the wear-resistant and sanded guide rails, the speed regulation and the optionally available extraction sockets convince in every regard. The sliding carriage protects the workpiece surface of components that are sensitive to scratches. The workpiece is inserted in the V-prism from the sliding carriage. The processing is performed by pushing the sliding carriage with workpiece over the tool. The travel path is 210mm. The sliding carriage can be locked in place for longer components. Our variety of high-quality solid carbide chamfers provide for vibration-free, clean and constant chamfering quality depending on the material. A chamfer width of up to 4 mm is possible in NE metals and a chamfer width of up to 2mm in steel.

The KKF3-SL, a universal chamfering and contour milling machine, has a measuring head attachment. Tools with a shaft diameter from Ø6-12 mm can be clamped in the milling cutter support. Our versatile tool range includes different VHM milling cutters and blade heads. The VHM milling cutters are available for the processing of chamfer angles and radii. Ball bearings with Ø6 or Ø8mm are used for contour processing with the VHM milling cutters. Tapered contour chamfers are used in combination with optional guide fingers or stop rulers. The use of cutter heads with cutting inserts and guide ball bearings starting at Ø10mm permit maximum efficiency. A guide prism with VHM shaft chamfering can optionally be used for straight edges. The exact chamfer setting is performed through a micrometer screw. A chamfer width of up to 6mm at 45° is possible in steel. In NE metals, significantly larger chamfers are possible depending on the tool and angle.

The KKF4-SL, a universal chamfering and contour milling machine, has an ER collet chuck. Tools with a shaft diameter from Ø6-12 mm can be clamped. Our versatile tool range includes different VHM milling cutters and blade heads. The VHM milling cutters are available for the processing of chamfer angles and radii. Ball bearings with Ø6 or Ø8mm are used for contour processing with the VHM milling cutters. Tapered contour chamfers are used in combination with guide fingers or stop rulers. The use of cutter heads with cutting inserts and guide ball bearings starting at Ø10mm permit maximum efficiency. A guide prism with VHM shaft chamfering can be used for straight edges. The exact chamfer setting is performed through a micrometer screw. A chamfer width of up to 4mm at 45° is possible in steel. In NE metals, significantly larger chamfers are possible depending on the tool and angle. The KKF4-SL has speed regulation that is very useful for the processing of aluminum or stainless steel.

The ASO 600-ASL edge and contour deburring machine is designed for chamfering small to medium-sized workpieces. The refined machine features, such as the folding table, the tool-free spindle locking and the height adjustment guide for tool change convince completely in their performance. The durable steel casing, the wear-resistant and sanded workplate with extraction socket and speed regulation round off the total package. The speed range from 9,000-21,000 rpm is ideal for use of NE-metals up to high-alloy materials. Thanks to the brushless motor the machine is perfect for continuous operation. Our versatile tool range includes different VHM milling cutters and CBN or diamond grinding pencils. The VHM milling cutters are available for the processing of chamfer angles and radii. Ball bearings with Ø3, Ø4, Ø5 or Ø6mm are used for contour processing with the VHM milling cutters. Tapered contour chamfers are used in combination with guide fingers or stop rulers.

The KKE edge and contour deburring machines are designed for chamfering small to medium-sized workpieces. The durable steel casing, the wear-resistant and sanded work plate and the speed regulation convince in every regard. The machine is available in KKE1 and KKE2 designs. The KKE2 includes a prismatic guide with extraction socket in the scope of delivery. Our versatile tool range includes different VHM milling cutters and CBN or diamond grinding pencils. The VHM milling cutters are available for the processing of chamfer angles and radii. Ball bearings with Ø3, Ø4, Ø5 or Ø6mm are used for contour processing with the VHM milling cutters. Tapered contour chamfers are used in combination with guide fingers or stop rulers. A chamfer width of up to 3mm is possible in NE metals and steels and up to 2mm in stainless steel. Radii processing is feasible up to R3. We recommend an industrial vacuum with automatic switch-on for the KKE2 so that cleanliness at the workplace can be guaranteed.

The small and compact chamfering machine is designed for chamfering small to medium-sized workpieces. The light aluminum casing, the wear-resistant and sanded work plate, the optional speed regulation and extraction sockets convince in every regard. The Speedy Contour is available in the type 270 and 320 designs, this refers to the able plate size. Both versions are available with and without speed regulation. For high-alloy materials, the speed range can be adjusted for speed-regulated machines from 10,000 to 30,000 rpm, through a technical change, to 2,800 to 7,400 rpm, and for machines without speed regulation from 20,000 rpm to 5,100 rpm. Thanks to the brushless motor the machine is perfect for continuous operation. Our versatile tool range includes different VHM milling cutters and CBN or diamond grinding pencils. The VHM milling cutters are available for the processing of chamfer angles and radii.

The sturdy chamfering machines are designed for chamfering, edge chamfering and welding seam preparation. The machines can process sheet thicknesses from 2-190mm. The machines generate a very good chamfering quality thanks to the optimized interaction between the cutter head, cutting inserts and minimal quantities of lubrication. In NE metals and steel, a chamfer width up to 30mm is possible. The MMB machines have gradual speed regulation, which is very useful when processing aluminum or stainless steel. The angle adjustment can be set gradually in the range of 30° depending on the machine type and design, for example, 25-55°, 30°-60° or 35-65°. The MMB series is equipped with a feed unit by default. The machines can be extended with roller guide ways or converted into automatic chamfering machines. Depending on the design, the machine table is equipped with ball or heavy-duty rollers.

The sturdy and easy-to-use chamfering machine was designed for the deburring and chamfering of small to medium-sized workpieces and bar material starting with a thickness of 1 mm. The machine generates a very good chamfering quality thanks to the optimized interaction between the cutter head and cutting inserts. In NE metals and steel, a chamfer width up to 11mm is possible. The WKF 170 has gradual speed regulation, which is very useful when processing aluminum or stainless steel. The angle adjustment can cover a range from 15-60° in 5° steps. For longer workpieces or serial part production, we recommend optimizing the feed unit with pressing pressure, surface quality, feed speed and service life of tools. The machine can be installed on an undercarriage for flexible use in a workshop, which simultaneously serves as a chip box. The machine can be extended with roller guide ways or converted into an automatic chamfering machine.

The sturdy and easy chamfering machine is designed for deburring and chamfering of small to large workpieces from 1 mm thickness. The machine generates a perfect chamfering quality thanks to the optimized interaction between the cutter head and cutting inserts - like sanded. In NE metals and steel, a chamfer width up to 10mm is possible. The ASO160-M is ideal for processing steel and aluminum. The ASO 160-MSL design has speed regulation that is very useful for the processing of aluminum or stainless steel. For longer workpieces or serial part production, we recommend optimizing the feed unit with pressing pressure, surface quality, feed speed and service life of tools. The machine can be installed on an undercarriage for flexible use in a workshop, which simultaneously serves as a chip box.

The sturdy and easy chamfering machine is designed for deburring and chamfering of small to large workpieces from 5 mm thickness. The hardened and sanded guide rails must be turned for smaller and thinner workpieces starting with a thickness of 2 mm. Thanks to the optimised interplay of cutter head and cutting inserts, the machine ensures clean and constant chamfering. A chamfer width of up to 12 mm is possible in NE metals and a chamfer width of up to 10mm in steel. The cutting edge length of the cutting inserts can be used 100% thanks to the innovative axially adjustable motor shaft. The ASO 650-WSL has speed regulation that is very useful when processing aluminum or stainless steel and a gradual angle adjustment in a range from 15-45°. A radius processing from R1.2 to R6 is possible with different cutting inserts. For longer workpieces or serial part production, we recommend optimizing the feed unit with pressing pressure, surface quality, feed speed and service life of tools.

The sturdy and easy chamfering machine is designed for deburring and chamfering of small to large workpieces from 2 mm thickness. The sturdy cast iron casing, the hardened and sanded guide rails, the speed regulation and the integrated chip box convince in every regard. Thanks to the optimised interplay of cutter head and cutting inserts, the machine ensures clatter-free, clean and constant chamfering. A chamfer width of up to 10 mm is possible in NE metals and a chamfer width of up to 5mm in steel. Hardened workpieces, HSS and hard metal materials can be processed through optional CBN and diamond grinding discs. For longer workpieces or serial part production, we recommend optimizing the feed unit with pressing pressure, surface quality, feed speed and service life of tools. The machine can be installed on an undercarriage for flexible use in a workshop.

The FS 5 is a sturdy and extremely cost-effective chamfering machine with cutter head and cutting inserts. Straight edges of cube-shaped workpieces can be easily chamfered. It is designed for deburring and chamfering small workpieces starting with a thickness of 3 mm. The sturdy casing, the sanded guide rails and the integrated swarf boxes convince in every regard. The V-prism is foldable for changing the reversible cemented carbide inserts. Thanks to the optimised interplay of cutter head and cutting inserts, the machine ensures clatter-free, clean and constant chamfering. The chamfer setting is made through a knurled handwheel. A chamfer width of up to 5 mm is possible in NE metals and a chamfer width of up to 3mm in steel. The machine has a switch-on duration of 10 - 30%/h.