Industrial plastics - Import export

Most people are known plastic films to protect food in the household. The POLIFIBRA films GmbH manufactures and assembles polyester and laminated films, which are used because of specific character in different industrial manufacturing sectors. POLIFIBRA provides polyester films with different strongly adhering surfaces. In our product POLI BOND the surface of the PETP film on or treated on both sides in varying degrees. This can be a very significant improvement in the adhesion of coatings to be achieved. POLI BOND can in the film thicknesses 19µ - 350µ are delivered.Different printings require different surfaces. In addition to highly transparent or colored opaque base films we offer here at various coatings that allow easy and quick editing. Seal foils are coated films, the above-defined temperature ranges enable an activation of the coating so as to allow bonding of different products. POLIFIBRA films offers solutions for different temperature ranges and applications.

Through a long-term cooperation with advertising producers, we have developed a wide range of products for the office and promotional product industry. We produce plastic parts for various sectors such as catering / restaurants, computers, household, desk, sports, and games. Our major partner is the company Plastolan. If you want to learn more about Plastolan, please look just right on the corresponding website ( www.plastolan.de).

chemical blowing agents, microsphere masterbatches, lubricants, demoulding aids, UV stabilisation and more

chemical blowing agents, microsphere masterbatches, lubricants, demoulding aids, UV stabilisation and more

BIEGLO offers polyimide powders for various processes. The Dexnyl PI powder is available in two different particle sizes. Our Dexnyl PI Powder 100P_19 suitable for compounding and compression molding application and our Dexnyl PI Powder 260_19 is suitable for producing compression molded and direct formed parts. The range of products that can be produced from our polyimide (PI) is only limited by the processing machines. Polyimide powder can be processed by hot compression molding, direct forming, iso-static compression molding or it can be compounded with other materials as an additive. Polyimide powder is often compounded with PTFE to increase certain properties of the PTFE.

BIEGLO can offer PEEK powders in various viscosities. It can be used for a variety of applications: semi-finished product extrusion, injection molding, compounding, filament and film extrusion, coatings. Our CoPEEK 012P is a high viscous, unreinforced PEEK for extrusion and injection molding, thus it is the standard type for the production of semi-finished products. CoPEEK 021P is medium viscous, unreinforced PEEK for injection molding. But it can also be extruded for the production of films and filaments. CoPEEK 085P is low viscous, unreinforced PEEK for the extrusion of films and filaments. It is also used as the basis for compounds and composites. Our CoPEEK can be processed on machines for thermoplastics without any problems. We recommend a processing temperature of 360 °C to 380 °C. BIEGLO CoPEEK is ISO 10993 certified for medical applications and also has FDA certification.

Use our industrial manufacturing expertise for your products too ,Manufacture of silicone or aluminium moulds ,Gas internal pressure procedure (GIP) Processing of sheet plastic (cutting, milling, bending) More information available at https//www.geck.de

• Heats up the compressed air up to 100 °C (212 °F) • Total avoidance of condensation • Simple and accurate temperature control • Easy to fix on control unit • Also suitable for dry ice blasting machines with CO2 pellets • For the cleaning of switch cabinets, thin metal sheets, electronic components

Asparagus sorting chain - we also assemble assemblies! Asparagus sorting chain with unloader, made of thermoplastic materials. Of course, the material is approved for food contact.

The row of fingers is cast on a steel rod and then riveted with other rods on a belt of rubber.

• Extreme low consumption • For difficult to access and delicate parts • For manual blasting operations • Adaptable for use with every type of robot • No build up of ice, as thermally insulated • With CO2 quantity controller

- detects and separates any type of metal, loose or encapsulated - flexible integration into existing conveying systems independent of direction, quick and cost-effective -easy to operate - high-precision metal detection, extremely reliable - uncompromising safety, thanks to mesuSafetyPack

metal separator was developed for the examination of plastic granulates, ground material and powders for metallic foreign bodies. It is used in the injection molding and extrusion areas for slow-flowing material columns. Both the detector and the ejection unit have been specially developed for this area of use. This results in top performance data for precision, operating reliability and ease of cleaning. Failsafe storage of all system parameters Digital signal processing for best detection Process- and condition monitoring Standardised system for a wide area of use Robust construction for maximum lifetime Highest precision in long-term operation Fast ejector for minimized material loss Dismantle without tools All components are easily accessible

Various product ranges to assemble and fasten easily panels

BIEGLO offers finished or semi-finished parts directly formed from polyimide powder with all the attributes of sintered PI. The advantage of direct formed parts are the lower costs as quantitiy is increasing. Due to almost zero percent waste during production it can be a more economic production method. Machined parts are widely used for small series high precision applications. Polyimide direct formed parts can be used in different applications: Automotive industry: racing engine fuel line. Jet engine: vane bushing or lock nut insert. Industrial machinery: hotrunner systems nozzles or plasma cutting torch as gas distributers or sealing components. Semicon HDPCVD Equipment: e.g. heater coil spacer. Life sciences: rotor seal or pneumatic surgical tool vane.

BIEGLO offers PEEK micro-mold parts up to 12mm in the largest dimension. Our smallest part to date is roughly 800µm x 300µm x 380µm and the thin wall section near 0.1mm. The feature aspect ratios around 6:1. In addition, the part volume 0.08 cm3 or less, the gate size as small as Ø0.1mm and the ejector pins as small as Ø 0.254mm. PEEK micro-mold parts must have a gate and ejection location consideration and the material selection can greatly affect the fill and definition of features.

BIEGLO offers injection molded or machined PEEK screws that can perfectly replace metal screws. Our PEEK screws are applied to imrove the chemical resistance without loosing too much of the mechanical strength. Besides stock made screws, BIEGLO offers custom made screws based on our customers requirements.

ideal cable clip for easy application and assembly without drilled hole

ideal to release unpredected loads on cable wires.

ideal fastener to assemble permanently two panels.

ideal tight and strong fastening solution

IDeal to assemble panels with metal screw

Ideal for fastening cables on metal sheets. Various designs and sizes.

Push rivets ideal for panel fastening

Screw Rivet ideal for panel fastening. Possibility to disassemble

Ideal fasteners for panel fastening

We manufacture customer-specific molded parts made of rubber, silicone and elastomer composite parts in small and large series production according to your sample or drawing. Molded rubber parts are generally characterized by their good formability, chemical resistance, pressure and abrasion resistance and good electrical properties. We advise you in detail on the selection of the suitable material, with a view to the functional description, temperature resistance, chemical requirements, weather influences and resilience. Our molded parts are used in all industries, such as the automotive industry, medical technology, mechanical engineering and electronics industry. We offer customized parts: Protective covers for input devices, Rubber seals and rings, Grommets, flanges, bellows, Form Tubes, Rubber damper, PU molded parts (e.g. wheels and rollers) Combined rubber-metal parts / rubber-plastic parts, etc.

From the initial concept to a safe and reliable series delivery, our customers get everything from a single source. They benefit from our decades of experience in manufacturing interiors as well as exteriors for the automotive industry.

In the food industry or machine construction; for sanitary products or even toys... ...side gusset plastic bags, sacks and pouches offer sturdy, practical packaging for your products and protect them from harm. Our versatile side gusset bags can also be used as liners for cartons and cardboard boxes. Side gusset bags get their name from two folds, or gussets, made along the sides of the bag that create extra volume. Side gusset bags and sacks are excellent for packaging larger items that don’t otherwise fit in conventional flat bags.