Measurement - equipment & instruments - Import export

These are the accssories use for machines.

Laser Scanner Solution: This task is a typical application of the high-resolution QuellTech 2D/3D Q5-880 Blue Laser Scanners. Two of these units are placed at the left and at the right of the measuring objects, at a defined inclination angle. Blue laser light in this case is a prerequisite, as the cast parts are red-hot, hence emitting in the red spectral range. Additionally, the client was in need of a software solution for the project, so a 3D point cloud processing application was implemented, performing inline and evaluating width, height and angle results. QuellTech customer is able to inspect continuously the product quality, simultaneously avoiding scrap. He uses the same system for more than 10 different types of castings. Errors caused by manual inspection are considerably reduced, and safety for personnel is enhanced.

The QuellTech laser sensor family Q4 or Q5 used for these tasks is generally mounted on an arm of a rotational axis, to scan along the complete 360° angle of the internal surface in a sequence of strips. The Q4 sensors can also be used to control the weld seam tracking itself for rapid setup and ease of use. Even during a project, the range and scope of the Q Series sensor demonstrates the advantages of a modular system to quickly adapt to project needs, where the smallest system has provided fast analysis of pipes as small as 105mm. The low power, with standard communication protocols, enable battery powered systems to transmit wireless data to other systems for review and cloud back up.

The key to the successful optimisation of compressed-air systems is data. The METPOINT® range of measurement equipment with sensor technology and monitoring provides the data base for the evaluation and assurance of the compressed-air quality and for the identification of hidden cost drivers. Our measurement equipment can also be employed for the extension of plants and for the early elimination of malfunctions. With our sensor technology, you can capture residual oil content, residual humidity, volume flow and pressure – constantly, faultlessly and with exemplary precision. Our Monitoring and Data Logging makes all the relevant data accessible to you and your employees at a glance, ensuring the safety of your processes and the quality of your products. In this way you can take your energy management and quality control requirements to the next level of success.

Laboratory bucket for transporting, decanting and mixing. Safe emptying with wide spout. Handle made of metal.

On request, we can integrate all of our interferometer systems into our UP machine for quality control in one setting. Be it with a simple strip display or a fully automatic strip evaluation for visualizing the 3D topography. The technical specifications of the intermeter systems are identical to the stand-alone systems.The larger travel range of the MMC900 offers the option of mounting a 6 “interferometer next to the Z axis. After machining the workpiece, the X-table is moved under the interferometer and the surface is measured.

Fizeau Interferometer, 4″ -System, Tabletop system, Automatic interference evaluation.

Fizeau Interferometer, Measuring diameters from 4″ to 12″, Granit base, Passive vibration isolation system, Automatic interference evaluation.

Fizeau Interferometer, Measurement aperture 6″, Granit base, Passive vibration isolation system, Automatic interference evaluation.

Incremental length probe with magnetic detection principle for high reliability. with USB interface. Very high accuracy and repeatability.. Resolution 0,1µm or 0,5µm. Extremely insensitive to contamination such as oil mist, moisture and dust. Ball spline bearing of the spindle for long life time. Perfectly suited for automated measured value acquisition in measuring devices, assembly and manufacturing lines. Basic measuring software for evaluation included.

Bucket for transporting bulky goods. Saves space, sturdy, easy to carry, available with lid.

Incremental length probe with magnetic detection principle for high reliability. with USB interface. Very high accuracy and repeatability. Resolution 0,1µm or 0,5µm Extremely insensitive to contamination such as oil mist, moisture and dust Ball spline bearing of the spindle for long life time Perfectly suited for automated measured value acquisition in measuring devices, assembly and manufacturing lines. Basic measuring software included

Industrial pressure measurement covers a very wide range of gases and liquids. The physical and chemical properties of these products sometimes make them incompatible for contact with the sensing elements of pressure gauges or transmitters. In such cases the measuring instrument must be separated from the pressurized fluid by a system capable of transmitting the pressure to this instrument while isolating it from the fluid itself. This system is known as a diaphragm seal. Bourdon offers a wide range of diaphragm seals for nearly all applications and industries. Do not hesitate to contact our specialists to find the best solution for your application.

Magnetic-inductive flow measurement allows the precise measurement of electrically conductive liquids such as sewage. Standard measuring values are the current flow and the accumulated pumping capacity (e.g. daily volume). The measuring signals are available either as 4 – 20 mA or impulse signals and can be transmitted to the data recorder for state recording and diagnosis or to the AWAcontrol control technology for pump control. Magnetic-inductive flow meters are reliable and economic compact units or installation in the pressure line and are available in two basic versions: Sensors for pipe installation with integrated measuring transducer and on-site display as a compact unit Sensors for pipe installation with separate measuring transducer. With this version, the measuring transducer can be located separately on the wall in the service building or as a fitted housing directly in the AWAcontrol control cabinet.

Closed pneumatic-mechanical switching system The sewage-resistant pressure bellows and the end membrane are connected via a pneumatic line routed in a protective tube. There is a plastic housing on the collecting tank of the sewage pumping station which contains 4 easily accessible micro-switches In addition, there is a manometer for continual filling level display located in the housing

Redundant twin measuring system where there is a requirement for increased operational safety for sewage pumping stations (e.g. main pumping station) for municipal applications. Product features The twin measuring system HWAS-BN uses two mutually independent measuring systems which work in different ways. The analogue sensor HWAS for integration in the pump control unit is combined with the pneumatic-mechanical contact sensor system MB. If one of the two measuring systems fails, emergency control is automatically triggered by the other measuring system.

Redundant twin measuring system where there is a requirement for increased operational safety for sewage pumping stations (e.g. main pumping station) in building service engineering and for municipal applications. Product features The twin measuring system MWAS-BN uses two mutually independent measuring systems which work in different ways. The analogue sensor AS for integration in the pump control unit is combined with the pneumatic-mechanical contact sensor system MB. If one of the two measuring systems fails, emergency control is automatically triggered by the other measuring system.

Pressure sensor for analogue filling level measurement Supply voltage 24 V DC Output of an analogue measuring signal 4 – 20 mA Pressure ranges depending on tank height 0 – 50 / 200 or 400 mbar Safe at several times over-pressure Explosion protection according to ATEX

Measurement using the impact pressure method Measuring range 0 – 0.5 mWS Connection via polyamide flange with quick-action elbow gland Enclosure rating IP 67 Including 5 metres of rigid PU hose (Ø 8 mm)

Key-Features ■ Configurable output signal (4...20 mA, 0...20 mA, 0...5 V, 0...10 V, ±5 V, ±10 V ■ Very low residual noise ■ Integrated cable break detection

High accuarcy incremental length probe with magnetic operating principle. Extremely insensitive to contamination such as oil mist, moisture and dust Due to the Ø 20mm clamping shaft extremely robust against oscillations and vibrations Perfectly suited for automated data acquisition in measuring devices, assembly and production lines

At a glance • PS, white • Optionally packaged individually and sterilised • With stripper edge • For single use • Clean room manufactured (clean room class 7) • Complies with EU food requirements and FDA regulations Volumetric and dosing spoons can be used to measure small amounts of powder, granulates and liquids exactly and dose them precisely. For precise measuring, excess medium is stripped off the upper edge of the spoon. The content volume is engraved on the handle. The flat front edge of the volumetric spoon is ideal for picking up medium from the bottom of the container or for getting into the corners of the container, thus allowing for good emptying of small remaining amounts. The flat base makes it possible to set the volumetric spoon down without spilling the content. The disposable dosing spoon is suitable for use as a sample spoon for taking small sample quantities.

The Loresta GX is used to measure conductors and semiconductors in the lower resistance range. Measuring range: 10^-4 – 10^7 Ω. It is used to measure the surface resistivity (Ω / □), the volume resistivity (Ω · cm), electrical conductivity (S / cm) in the low-resistance range. The Loresta-GX works according to the 4-pin measuring method. The method is based on the four-wire method and was developed to eliminate the influence of contact resistance. The measuring heads consist of four needle-like electrodes. To simplify the measurement method and calculate the correction factors, all four electrodes are at an equidistant distance from each other. Conductive Materials: Paints, pastes, paints, printing ink, Smart Textiles, Plastics, rubber Film materials, metallic thin films, metallised films, resistor pastes amorphous silicon / silicon wafer, antistatic materials, EMC shielding materials ...

The Hiresta – UX measuring device is used to measure semiconductors or non – conductors (insulators). Measuring range of 10^3 – 10^14 Ω . The Hiresta UX is specialised in measuring the resistance, the surface and volume resistivity of various substances and materials of all shapes and sizes in the high-resistance measuring range. For measurements related to the ASTM D257 / ISO 2951 / JIS K 6911 standard of: antistatic materials flooring materials paper, packaging materials paints, pastes, paints fibers, clothes, fabrics adhesives, greases glass, concrete, ceramics plastics, film materials, foils etc. Up to 2000 measurement results can be exported to USB memory stick The conductivity meter impresses with its compact design, a color 7.5 “TFT touch display and user-friendly menu navigation.

Powder technology has a long history in various sectors such as the chemical, food, pharmaceutical and metal industries. Measuring the physical properties of powder is very difficult and each industry uses different assessment methods. The PD-600 powder measuring system is the further development of the PD-51. It can determine the physical properties of powder via resistivity. Powder materials of carbon products: Materials used for rechargeable battery electrodes, condensers and resistance material and insulating electronics / cokes / graphite / carbon black / carbon fiber / nano carbon, etc. Metal powder: Materials used for battery electrodes, thin film materials such as copper powder or ITO powder, for circuit board materials, for example conductive paste and electro conductive paint. Others: Thermoplastic powder, Printer toner, Magnetic material such as ferrite, food material, pharmaceutical related and automobile parts.

Low-noise coaxial measuring cables are used wherever the smallest voltages or charges have to be reliably measured, e.g. in pH measurement technology or nuclear research. The method was developed by bda connectivity and ensures reproducible results. Depending on the requirements, these cables can be supplemented with supply or power supply wires as well as additional shields.

Low-noise coaxial measuring cables are used wherever the smallest voltages or charges have to be reliably measured, e.g. in pH measurement technology or nuclear research. The method was developed by bda connectivity and ensures reproducible results. Depending on the requirements, these cables can be supplemented with supply or power supply wires as well as additional shields.

Low-noise coaxial measuring cables are used wherever the smallest voltages or charges have to be reliably measured, e.g. in pH measurement technology or nuclear research. The method was developed by bda connectivity and ensures reproducible results. Depending on the requirements, these cables can be supplemented with supply or power supply wires as well as additional shields.

Low-noise coaxial measuring cables are used wherever the smallest voltages or charges have to be reliably measured, e.g. in pH measurement technology or nuclear research. The method was developed by bda connectivity and ensures reproducible results. Depending on the requirements, these cables can be supplemented with supply or power supply wires as well as additional shields.