Vehicles- used - Import export

Castrol Syntrans AT 75W-90 is a fully synthetic manual transmission oil for commercial vehicles, especially for use in vehicles from the Mercedes-Benz Actros, Axor and Atego series. Advantages -Excellent thermal resistance -Very good wear protection, even under severe operating conditions -Excellently good synchronous behavior in MB commercial vehicle transmissions -Particularly resistant to aging Specifications API GL-4 MB Approval 235.11

Vehicles and systems that are used under extreme conditions need the right greases to protect important components. Our product range includes a large selection of multi-purpose and special greases from leading manufacturers for outstanding protection even under the highest operating conditions. Whether lubricating bearings in commercial and construction vehicles or using greases according to manufacturer specifications in classic cars – the optimum grease can extend the service life and maintenance intervals of machines, increase productivity in the vehicle fleet and optimize bearing function. We can advise you personally on the right choice of synthetic multi-purpose and special greases for individual applications.

Aral HighTronic C is a high-performance engine oil in Aral synthesis technology specially developed for cars with diesel particulate filters that require an ACEA C1 or C2 engine oil ideally combined with Aral Low SAPS technology for maximum service life of the diesel particulate filter Low ash with fuel savings in conjunction with very high-quality base oils and additives Application - excellently suitable for vehicles from the former Ford PAG group: Jaguar and Land Rover - very suitable for French car brands: Peugeot and Citroen - meets the high requirements of Japanese car brands: Mitsubishi, Mazda, Honda, Subaru, Suzuki, Toyota and Nissan -suitable for American vehicles with European diesel engines , e.g. Jeep -can be used on commercial vehicles of Japanese design and Italian origin, e.g. IVECO -please note the respective vehicle-specific specifications Specifications ACEA C1, C2

UNIVERSAL HEAT TRANSFER FLUID WITH FROST AND CORROSION PROTECTION PRODUCT DESCRIPTION Antifrogen® N is a monoethylene glycol-based, yellow- colored heat transfer fluid for industrial applications such as hot water heating, cooling and air conditioning systems, heat pump systems and wind turbines, but can also be used in rail vehicles or to fill Clariant leak indicators. Antifrogen® N contains a highly efficient combination of inhibitors that offer long-lasting corrosion protection in your systems. The frost resistance depends on the mixing ratio with water (chloride content <100 ppm, water hardness 0° - 25° dH) and must be at least 20% v/v Antifrogen® N (corresponds to frost protection down to -9 °C). Antifrogen® N is free of nitrite, amine, borate, phosphate and silicate

High-pressure gearbox oil in Aral synthesis technology. for use in manual transmissions, mechanical transmissions and steering systems use in commercial vehicles also for extended oil change intervals (please note manufacturer's instructions) Specifications API GL-4 MAN 341 Type Z4 ZF TE-ML 01L, 02L, 16K

Product Description Klima Cleaner is a fluid disinfectant for air conditioning and ventilation systems. It comes in an aerosol can with a one-shot valve. As the can empties itself, it uses the air circulation system to diffuse and atomise the sanitizer throughout the entire empty vehicle. Eliminates and continuously prevents a re-emergence of bacteria, fungi and mould Eliminates hotbeds of germs Stops unpleasant smells forming Prevents irritation of the eyes and respiratory tracts Safe for humans and animals No adverse side effects on the air conditioning or the vehicle interior Effective and safe Klima Cleaner is available in seven different scents: Unscented, fresh water, lemon, apple, vanilla, peppermint and leather This product is certified to BS EN 1276:1997 and BS EN 1650 (Chemical disinfectants and antiseptics) and tested as safe and non-flammable when used in vehicles. In contrast to similar products, Klima Cleaner is classified as “non-flammable”. Under normal,...

Micro-Epsilon is your reliable partner for measuring and inspection systems that are used equally by vehicle manufacturers and supplier companies. The measuring systems enable process stability, production reliability as well as quality. In addition, Micro-Epsilon's worldwide network enables efficient project handling on site.

High-quality and modern coolants ensure maximum protection against high thermal loads in car and commercial vehicle engines. The use of modern coolants can extend the lifespan of engines and minimize potential damage as well as downtimes. We offer a wide range of coolants from our partners Aral and Castrol. Together we will find the right coolant to meet your specifications and requirements.

Battery voltage indicator for 12VDC lead acid vehicle batteries Robust construction, compact housing Easy mounting on the windshield of the vehicle using suction cup Extremely low power consumption

Designed for use in rough environment Rugged construction / potted device Protection against unfavourable environmental conditions DC/DC wide range input Filtered against vehicle on-board disturbances Galvanic separation 1,5kV (500V at 12/24VDC input voltage) Design acc. to EN60950, EN1175, ISO20898 Short-circuit / No-load protection Over Temperature protection Parallel connectable Customized devices (e.g. individual cable loom, alternative input and output voltages etc.) Version with "E" mark (E1 approval) for road vehicle use Regulated output, high efficiency

Designed for use in rough environment Rugged construction / potted device Protection against unfavourable environmental conditions DC/DC wide range input Filtered against vehicle on-board disturbances Galvanic separation 1,5kV Design acc. to EN60950, EN1175, ISO20898 Short-circuit / No-load protection Over Temperature protection Parallel connectable (Option: Smart output characteristic) Customized devices (e.g. individual cable loom, alternative input and output voltages etc.) Version with "E" mark (E1 approval) for road vehicle use Regulated output, very high efficiency

Designed for use in rough environment Rugged construction / potted device Protection against unfavourable environmental conditions DC/DC wide range input Filtered against vehicle on-board disturbances Design acc. to EN60950, EN1175, ISO20898 Galvanic separation 1,5kV Short-circuit / No-load protection Over Temperature protection Parallel connectable Customized devices (e.g. individual cable loom, alternative input and output voltages etc.) Version with "E" mark (E1 approval) for road vehicle use Regulated output, high efficiency

Designed for use in rough environment Rugged construction / potted device Protection against unfavourable environmental conditions DC/DC wide range input Filtered against vehicle on-board disturbances Galvanic separation 1,5kV Design acc. to EN60950, EN1175, ISO20898 Over Temperature protection Short-circuit / No-load protection Parallel connectable Customized devices (e.g. individual cable loom, alternative input and output voltages etc.) Version with "E" mark (E1 approval) for road vehicle use Regulated output, high efficiency

Designed for use in rough environment Rugged construction / potted device Protection against unfavourable environmental conditions DC/DC wide range input Filtered against vehicle on-board disturbances Galvanic separation 1,5kV Design acc. to EN60950, EN1175, ISO20898 Short-circuit / No-load protection Over Temperature protection Parallel connectable Customized devices (e.g. individual cable loom, alternative input and output voltages etc.) Version with "E" mark (E1 approval) for road vehicle use Regulated output, high efficiency

The fuel systems division specializes in the development and production of serial products. Two main products are produced and sold: fuel pumps which are used in vehicles and flow meters in fuel dispensers which work on the screw spindle principle. Both products meet the high requirements demanded by the automotive and tank facility industries with regard to performance, accuracy and quality. The high overall efficiency in comparison with other pump stages, the low noise emission and the pump's high dirt resistivity as well as the outstanding controllability of a displacement pump make our pumps a reliable and important module in the delivery unit.

The pressure switch P01 has been designed especially for use in mobile machines. The EMC characteristics as well as the impact and vibration resistances have been designed for this field of application. This facilitates their use in adverse ambient conditions such as can be found in mobile hydraulics. The integrated electronic switches (NPN or PNP) can be preconfigured ex-works. The P01 is available for pressure ranges from 0...10 bar to 0...1200 bar, whereby a switching accuracy of 1 % of the measurement range end value can be achieved. The maximum permitted media temperature totals 150 ºC; the ambient temperature totals 125 ºC. The parts coming into contact with media have been produced from stainless steel (1.4548) and guarantee, in combination with the welded thin-film measurement cell, maximum media compatibility. Optionally, a damping device can be integrated into the media access.

The M01 series has been especially designed for applications in adverse ambient conditions in the same way value is placed on high resistance to aggressive media. Furthermore, the modular principle permits many combinations of pressure connection, pressure range, output signal and connector, so that the right sensor can be found for most applications. For pressure ranges from 10 to 2000 bar, which are frequently required for use on mobile machines, welded stainless steel measurement cells are used which are suitable for media temperatures from −40 to +150 °C. Depending on the type of measurement cell and the material coming into contact with the media, the M01 is resistant to aggressive/non-aggressive gases and liquids. On request, versions in 316L design for use in hydrogen pressure measurements are available. In addition to CE and UL certificates, every M01 product with a 1.4542 stainless steel measurement cell possesses an E1 approval verifying its suitability for use in vehicles.