Slides - Import export

Type MR - roller bearing mounted slide /Typ MS - dovetail slides Positioning accuracy: 0,001 - 0,1 mm according to the spindle used and the feedback system Drive: Stepping or direct-current motors

The profiled guide slide PFS is available in 5 series with sizes from 100 mm up to 425 mm width and strokes up to 2000 mm. To protect them against dirt accumulations, the slides are covered with bellow covers. Other covers on request. The slides are available in aluminium (nature anodized), or casted iron GGK-25. Optional steel C-45. The ball thread spindle drives are available in the qualities T5 and T7 with spindle pitches from 5 to 50 mm. PFS (basic equipment) ball screw spindle acc. to standard type allocation screwed up bellows cover coated on both sides integrated inductive limit switches (PNP break contact) incl. plug-connector in the endplate

The V shape of the shaft support is the result of purposeful internal development work at Föhrenbach. The most important advantage comes from having the greatest possible distance between the shafts and above all in the lay-out of the four ball-bearing housings whose loadbearing rows of balls are located underneath the shaft. The unitized, modular type like design realized with these devices enables to cover a wide range of application specific solutions. Manufactured in standard widths from 75 to 425 mm and in lenghts of up to 4000 mm, the products are designed to provide solutions that allow to cover almost all handling and mounting tasks that need to be met. An experience of long standing assures for competent solutions.

The highest accuracy class “Ultra-Precision plus” impresses with an accuracy of 0.0005 mm, thus 0.5 µm. Due to the fact that the control unit of the Föhrenbach slides is compatible with the interfaces of almost all measuring systems, this extraordinary repeatability does not depend on a particular system or a specific provider. Föhrenbach profiled guide slides with integrated linear motor are available in the series PFL (with bellows covers) and PCL (with sheet metal covers). For both series three sizes are available. We developed three resp. two linear motors of different force.

The RA line descripes a roller beared slide in a special sealed version. The standard type is equipped with a gap seal (approx. 0.5 mm). Special types with felt or nylon scrapers are possible, too. Our slides that run on roller bearings, in single-axis or multi-axis designs, are supplied in the materials grey cast iron and aluminium. The roller bearing slides run in preloaded, hardened and ground Vee-guides. This ensures a smooth, zero-play and extremely precise longitudinal movement - even under high load. Slides which must be designed with T-grooves or higher rigidity can be produced in a reinforced version.

The RH line is equipped with a hand wheel and a scale ring with a 0.02 mm scale gradation. Sizes 075 up to 200 can, on option, also be furnished with a 0.01 mm scale gradation. Our slides that run on roller bearings, in single-axis or multi-axis designs, are supplied in the materials grey cast iron and aluminium. The roller bearing slides run in preloaded, hardened and ground Vee-guides. This ensures a smooth, zero-play and extremely precise longitudinal movement - even under high load. Slides which must be designed with T-grooves or higher rigidity can be produced in a reinforced version.

The RK line is equipped with a cross type handle and, from size 300 on, with a hand wheel. Our slides that run on roller bearings, in single-axis or multi-axis designs, are supplied in the materials grey cast iron and aluminium. The roller bearing slides run in preloaded, hardened and ground Vee-guides. This ensures a smooth, zero-play and extremely precise longitudinal movement - even under high load. Slides which must be designed with T-grooves or higher rigidity can be produced in a reinforced version.

The RM line The RM line is equipped with a knurled micrometer knob of a 0.02 mm scale gradation. Sizes 075 up to 200 can, on option, be delivered with a 0.01 mm scale gradation, too. Our slides that run on roller bearings, in single-axis or multi-axis designs, are supplied in the materials grey cast iron and aluminium. The roller bearing slides run in preloaded, hardened and ground Vee-guides. This ensures a smooth, zero-play and extremely precise longitudinal movement - even under high load. Slides which must be designed with T-grooves or higher rigidity can be produced in a reinforced version.

The RS line is equipped with a threaded spindle. From size 75 mm on, all dovetail slides (type SS) are equipped with a digital position readout. Different installation options allow to read the display from different viewing directions. The housing consists of shockproof plastic. The digital display allows to make fast adjustments over the complete measuring path. Our slides that run on roller bearings, in single-axis or multi-axis designs, are supplied in the materials grey cast iron and aluminium. The roller bearing slides run in preloaded, hardened and ground Vee-guides. This ensures a smooth, zero-play and extremely precise longitudinal movement - even under high load. Slides which must be designed with T-grooves or higher rigidity can be produced in a reinforced version.

The RE line is equipped with end plates and suits for the attachment of stops, micrometers, cylinders etc. Our slides that run on roller bearings, in single-axis or multi-axis designs, are supplied in the materials grey cast iron and aluminium. The roller bearing slides run in preloaded, hardened and ground Vee-guides. This ensures a smooth, zero-play and extremely precise longitudinal movement - even under high load. Slides which must be designed with T-grooves or higher rigidity can be produced in a reinforced version.

Our slides that run on roller bearings, in single-axis or multi-axis designs, are supplied in the materials grey cast iron and aluminium. The roller bearing slides run in preloaded, hardened and ground Vee-guides. This ensures a smooth, zero-play and extremely precise longitudinal movement - even under high load. Slides which must be designed with T-grooves or higher rigidity can be produced in a reinforced version.

The SH line is equipped with a hand wheel and a scale ring with a 0.02 mm scale gradation. Sizes 075 up to 400 can, on option, also be furnished with a 0.01 mm scale gradation. The Föhrenbach dovetail guides are made of grey cast iron and of aluminium, but makes of other materials are possible, too. The play is adjusted by means of an adjusting bar. All types are equipped with greasing nipples and greasing grooves. All outside surfaces are ground and the guides milled fine. Also on sale are one axe or multi-axe slide types that run on roller bearings. These are made of grey cast iron (GG 25) or of aluminium. Aluminium models are anodized black. Slides for higher loads can be delivered as reinforced execution.

The SM line is equipped with a knurled micrometer knob with a 0.02 mm scale gradation. Sizes 075 up to 200 can, on option, also be furnished with a 0.01 scale gradation. The Föhrenbach dovetail guides are made of grey cast iron and of aluminium, but makes of other materials are possible, too. The play is adjusted by means of an adjusting bar. All types are equipped with greasing nipples and greasing grooves. All outside surfaces are ground and the guides milled fine. Also on sale are one axe or multi-axe slide types that run on roller bearings. These are made of grey cast iron (GG 25) or of aluminium. Aluminium models are anodized black. Slides for higher loads can be delivered as reinforced execution. The Föhrenbach slide types that run on roller bearings run in prestressed, hardened and ground Vee-guides.

The SS line is equipped with a threaded spindle. From size 75 mm on, all dovetail slides (type SS) are equipped with a digital position readout. Different installation options allow to read the display from different viewing directions. The housing consists of shockproof plastic. The digital display allows to make fast adjustments over the complete measuring path. The Föhrenbach dovetail guides are made of grey cast iron and of aluminium, but makes of other materials are possible, too. The play is adjusted by means of an adjusting bar. All types are equipped with greasing nipples and greasing grooves. All outside surfaces are ground and the guides milled fine.

The SE line is equipped with end plates and suits for attachment of stops, micrometers, cylinders etc. The Föhrenbach dovetail guides are made of grey cast iron and of aluminium, but makes of other materials are possible, too. The play is adjusted by means of an adjusting bar. All types are equipped with greasing nipples and greasing grooves. All outside surfaces are ground and the guides milled fine. Also on sale are one axe or multi-axe slide types that run on roller bearings. These are made of grey cast iron (GG 25) or of aluminium. Aluminium models are anodized black. Slides for higher loads can be delivered as reinforced execution. The Föhrenbach slide types that run on roller bearings run in prestressed, hardened and ground Vee-guides.

The Föhrenbach dovetail guides are made of grey cast iron and of aluminium, but makes of other materials are possible, too. The play is adjusted by means of an adjusting bar. All types are equipped with greasing nipples and greasing grooves. All outside surfaces are ground and the guides milled fine. Also on sale are one axe or multi-axe slide types that run on roller bearings. These are made of grey cast iron (GG 25) or of aluminium. Aluminium models are anodized black. Slides for higher loads can be delivered as reinforced execution. The Föhrenbach slide types that run on roller bearings run in prestressed, hardened and ground Vee-guides. Even under high loads they assure smooth running operation, free from play and guarantee an extremely precise lengthwise motion. As compared to guide rails (dovetail type) they enable exact and easy displacement of parts, free from play.

The SK line is equipped with a cross type crank handle and, from size 300 on, with a hand wheel. The Föhrenbach dovetail guides are made of grey cast iron and of aluminium, but makes of other materials are possible, too. The play is adjusted by means of an adjusting bar. All types are equipped with greasing nipples and greasing grooves. All outside surfaces are ground and the guides milled fine. Also on sale are one axe or multi-axe slide types that run on roller bearings. These are made of grey cast iron (GG 25) or of aluminium. Aluminium models are anodized black. Slides for higher loads can be delivered as reinforced execution.

The sliding gate manual valve for low temperature type 8056 in reinforced version is used for cryogenic control applications down to 200°C. Media such as hydrogen, nitrogen, oxygen, carbon dioxide, etc. can be shut off safely and can be controlled excellently, even in the low temperature range.

This guiding system makes it possible to accurately position your products. Furthermore, you can fix it exactly at the desired place. The innovation lies in the backlash-free clamping, horizontal and vertical side misalignment ≤ 3 μm. Useful advantages: compact sizes and the possibility of adjusting and locking the guide by a hex screwdriver. Clamps permit a fast combination to 2 axis systems and/or 3 axis systems or the fitting of axis systems on a base plate. Features Dovetail slides made of Aluminium, natural anodized 5 sizes: 20, 30, 50, 80, 120 mm with standard stroke between 5 and 100 mm Backlash-free clamping Compact sizes Adjustment with knurled micrometer knob (standard) or hex screwdriver High load ratings Guides without play High damping Scale with knurled micrometer knob Mounting kit (clamps) Easy and quick to combine to 2 axis systems and/or 3 axis systems Optional position readout (starting from size 30 mm)

This guiding system makes it possible to accurately position your products. Furthermore, you can fix it exactly at the desired place. The innovation lies in the backlash-free clamping, horizontal and vertical side misalignment ≤ 3 μm. Useful advantages: compact sizes and the possibility of adjusting and locking the guide by a hex screwdriver. Clamps permit a fast combination to 2 axis systems and/or 3 axis systems or the fitting of axis systems on a base plate. Features Dovetail slides made of Aluminium, natural anodized 5 sizes: 20, 30, 50, 80, 120 mm with standard stroke between 5 and 100 mm Backlash-free clamping Compact sizes Adjustment with knurled micrometer knob (standard) or hex screwdriver High load ratings Guides without play High damping Scale with knurled micrometer knob Mounting kit (clamps) Easy and quick to combine to 2 axis systems and/or 3 axis systems Optional position readout (starting from size 30 mm)

This guiding system makes it possible to accurately position your products. Furthermore, you can fix it exactly at the desired place. The innovation lies in the backlash-free clamping, horizontal and vertical side misalignment ≤ 3 μm. Useful advantages: compact sizes and the possibility of adjusting and locking the guide by a hex screwdriver. Clamps permit a fast combination to 2 axis systems and/or 3 axis systems or the fitting of axis systems on a base plate. Features Dovetail slides made of Aluminium, natural anodized 5 sizes: 20, 30, 50, 80, 120 mm with standard stroke between 5 and 100 mm Backlash-free clamping Compact sizes Adjustment with knurled micrometer knob (standard) or hex screwdriver High load ratings Guides without play High damping Scale with knurled micrometer knob Mounting kit (clamps) Easy and quick to combine to 2 axis systems and/or 3 axis systems Optional position readout (starting from size 30 mm)

The miniature roller slides can be delivered either as open type or with end plates. The exterior part is made of aluminium, the interior part consists of hardened steel. With standard drilling pattern.

Our cross roller guide rails are freely interchangeable standard elements. Our guide rails allow the assembly of extremely rigid and precise linear guides without any play. Benefits Able to carry high loads running extremely smooth require little space long serviceable life Mounting instructions: When mounting the guide rails make sure the bearing surfaces have been machined in a parallel manner and are to the angle. The tolerances of the bearing and mounting surfaces shall conform to the process tolerances of the guide rails (standard quality). The prestress applied depends on the respective mounting conditions, on the rigidity of the assembled slide structure respectively. We recommend to apply a prestress equivalent to a value between 5 and 20 % of the maximum admissible load. However, the load carrying ability of the overall guide rail structure thus realized will, at any case, be reduced by the prestress applied.

The miniature roller slides can be delivered either as open type or with end plates. The exterior part is made of aluminium, the interior part consists of hardened steel. With standard drilling pattern.

Wrenches are a type of hand tool that is used to tighten and loosen bolts and nuts, and depending on the type of bolts and nuts, there are different types of wrenches. Box wrench is a common type of wrench that allows the user to loosen or tighten a bolt or nut without moving. They are designed to be attached to a specific handle. One of the most widely used wrench handles is the sliding wrench handle. Ronix RH-2621 Sliding Handle that is made of CR-V is a 1/2-inch square drive speeder wrench with perfect functionality. To find more information about this multipurpose hand tool, follow the “detailed description” part

The T20 series with toothed output shafts and a rotation angle of 200-220 degrees is ideal for applications where torque generation and higher cycle rates are the most important requirements. Helac’s sliding spline technology with helical teeth is not self-locking and offers both high impact resistance and a high holding torque for demanding applications. It functions both as a rotating device and as a mounting bracket and support structure, so that no external bearing systems, brakes or locking devices are required. Available in three standard sizes with an output torque of up to 6,780 Nm at 210 bar.

— Slide gate valve for solids flow on/off control, mainly used as an automatic valve for loss-in-weight feeder refill — Double acting pneumatic drive — Readily mounted 5/2 way solenoid valve Diameters - Different versions 80–400 mm (3.1–15.7 in)

These parts used for the precision machinery parts,made by brass and no surface treatment.

Light Rail product line includes full or partial extension lightweight telescopic guides. Optional locking mechanism for open or closed positions Various designs, maximum stroke 1,100mm Telescopic extraction up to 105% of the closed slide length The Light Rail product family includes lightweight telescopic rails to be used in environments allowing only reduced weight components. Smooth and quiet operation is ensured even with heavy loads. Elastic shock absorption avoids permanent distortion. The self-cleaning raceways mounted on the Light Rail telescopic rails ensure safe operation and less frequent maintenance. Main fields of application for Light Rail extractable telescopic rails: Food & Beverage Building & Furniture