Stainless rods - Import export

stainless steel*ground surface*Ø 12 mm

1 internal /*1 external thread M 10*Ø 12 mm*size of jaw 10 mm

Robust pendulum cup made of stainless steel V2A (1.4301) for industry and water treatment. The cup automatically swings into the horizontal position. This means that nothing can spill. The small diameter (Ø 130 mm) also makes it suitable for deep and narrow shafts. Particularly suitable for sampling from basins, tanks, shafts, open water etc. Sampling depths of up to 6 m can be achieved with the length-adjustable aluminium telescopic rods. The TeleSchöpfer telescopic rod with tools is a versatile sampling system. The interchangeable tools (angle cup, pendulum cup, bottle holder, stainless steel cup and landing net) are suitable for a wide range of applications. The tools are firmly connected to the telescopic rod by a practical snap connection.

Pendulum cup made of stainless steel V2A (1.4301) with extra-long, closed handle. The sample cup has no openings or undercuts up to an immersion depth of approx. 500 mm. The closed design of the shaft makes the scoop cup particularly suitable for sampling well water, sludge, waste water, liquid manure or similar. The sampler is particularly suitable for taking samples from basins, tanks, shafts, open bodies of water, etc. With the length-adjustable telescopic aluminium rods, sampling depths of up to 6 m can be achieved. The TeleSchöpfer telescopic rod with tools is a versatile sampling system. The interchangeable tools (angle cup, pendulum cup, bottle holder, stainless steel cup and landing net) are suitable for a wide range of applications. The tools are firmly connected to the telescopic rod by a practical snap connection.

Sterilisable pendulum beaker made of stainless steel V2A (1.4301) for industry and water treatment. Beaker with scraping edge, capacity 1000 ml. Ideal for powders, granulates, pastes and slurries. Particularly suitable for sampling from basins, tanks, shafts, open water etc. Sample depths of up to 6 m can be reached with the length-adjustable aluminium telescopic rods. The TeleSchöpfer telescopic rod with tools is a versatile sampling system. The interchangeable tools (angle cup, pendulum cup, bottle holder, stainless steel cup and landing net) are suitable for a wide range of applications. The tools are firmly connected to the telescopic rod by a practical snap connection.

Safely carries single cables Where single cables are to be routed in a group and supported firmly without the use of trunking, the Single Wire System SWS from PFLITSCH offers a better alternative to cable ties, clamps, hoses or hook and eye fastener tape. Your advantages: Bendable VA stainless steel rod for robust, flexible cable routing support Corrosion-resistant system Easy to clean, open cable routing Easy installation with VA stainless steel or plastic mounts SWS consists of bendable and yet robust 5 mm support rods with open routeing rings into which the cable is simply laid. Lines and hoses up to 16 mm can be safely accommodated – on straight sections or around corners. The support rods are attached with bolted-on plastic mounting plates or VA stainless steel mounts welded on to the machine body for example.

The electrical steam generators E 100 M – 120 M from CERTUSS offer you impressive output in two output capacities of 100 - 120 kW heat output. They are compact, economical and have a high output. All electrical versions do not require a permit for installation and use in Germany. Heating: Electrical heating rods Steam output 135 – 160 kg/h The sizes: E 100 and E 120 - In two output capacities of 100 - 120 kW heat output. - Fully electronic pressure and output control. - Compact stainless steel heating rod with low heating surface load, placed laterally on the pressure body for easy access. - Constant network load without consumption peaks. - Integrated multifunction display. - Multilanguage plain text indication.

With the new EMX model range of electric steam boilers, CERTUSS offers you twice the steam output as before with a significantly smaller footprint. Electric steam generators from CERTUSS are heated by stainless steel heating rods with a large heating surface. The output of the heating elements is regulated continuously via semiconductor contactors. One energy-efficient advantage is the immediate modulating output adjustment to the actual steam demand during the operating cycle. For greater steam demand of up to 640 kg/h or fluctuating steam loads, several ELECTRO steam generators can be cascaded in series. Multiple systems like this are an especially economical solution. Our compact electric steam systems feature built-in feed water tanks and feed water pumps. They require very little space and have a short heat-up time. Steam systems are also available as a unit with water conditioning equipment installed at the factory.

Flexible leveling feet Swiveling, leveling adjustable feet to compensate for uneven floors Swivel range : ± 4 ° to 20°. Adjustable foot plate: different shapes possible from diameter 20 mm to 120 mm Material: plastic PA (also ESD-capable possible) / zinc die-cast / stainless steel Color: black / bright, other colors on request Optionally with anti-slip plate: prevents adjustable feet from slipping on smooth industrial floors and can dampen vibrations Fastening to the floor with different versions: Optionally with screw holes in the plate Plate with extende base Base plate for safe subsequent mounting threaded rod: Material: steel / stainless steel Surface: galvanized / bright Alternative: ball head with internal thread Optionally with lock nut Translated with www.DeepL.com/Translator (free version)

▪ Screw-in version, measures current temperatures directly in the pipeline ▪ Rod-type version (-TSH), especially designed to determine the media temperatures in tanks and containers ▪ 5-pin connection ▪ Input signal: 0 ...3 V DC ▪ Output signal: 7 ...12 V DC ▪ CAN version ▪ Indication of the sensor status via LED ▪ 5-pin SPEEDCON connection plug ▪ CANopen protocol profile DS301, Typ 2.0A with manufacturer-specific additions ▪ LSS service DS305 v2.0 ▪ Output signal: CAN bus ▪ Measurement medium: liquids (consult STAUFF for use with aggressive media ▪ Calibration certificate on request Materials ▪ Housing (T): Stainless Steel ▪ Gaskets (T): FPM (Viton®) ▪ Rod (TSH): Stainless Steel 1.4304 ▪ Handle (TSH): Delrin Weight ▪ T (M10x1): 70 g / .15 lbs ▪ T (G1/4): 55 g / .12 lbs ▪ TSH: 120 g / .26 lbs Connection: ▪ a) STAUFF Test connection SGV-16S-G-C6F in the pipeline (only M10x1) ▪ b) Screw-in thread (T): M10 x 1 or G1/4 ▪ c) Screw-in thread (TSH): M10 Ambient Conditions (Screw-in...

A two-piece stainless steel rod (1.4301), coupling (bottom adapter) for spindle and shaft and square cap (accord. to DIN3223 C or E) made of stainless steel AISI 304. Toolles assembly of the spindle extension with a stainless steel clip-pin. Connection pins made of stainless steel 1.4301. Transport security of the rod minimum of 150N. Self-locking in every adjustable position with a PE sealing collar on the steel tube. Torques up to 1000Nm (oval type wedge gate valve with square tube size 30mm). Three-piece PE protection tube system with an additional corrugated protection tube, bonded centring cap and either a universal combi bell (Form C) or a universal bell (size Ø80mm or Ø100mm (Form E)). Completely dirt-proof and water-repellent. Incl.: Marking disc (double sided gas and water) as well as a universal bell adapter/sealing insert.

A three-piece rod made of stainless steel 1.4301, coupling (bottom adapter) precision casting, galvanised accord. to DIN EN 12329 und DIN 50961 (alternatively made of stainless steel AISI 304), square cap (top adapter) (accord. to DIN 3223 E) made of GJS400-15, galvanised accord. to DIN EN 12329 and DIN 50961 (alternatively in stainless steel AISI 304). Toolless assembly of the spindle extension with a stainless steel clip pin. Connection pins made of stainless steel 1.4301. Transport security of the rod minimum of 150N. Self-locking in every adjustable position through a PE sealing collar on the steel tube. Torques up to 250Nm. Four-piece PE protection tube system with a bonded centring cap, universal combi bell with sealing/sealing insert and a grooved and suspension system as rotation lock. Completely dirt-proof and water-repellent. Incl.: Marking disc (double sided gas and water) as well as a universal bell adapter.

Telescopic Spindle Extension T3 - Stainless steel (DIN3223 C and E) A two-piece stainless steel rod (1.4301), coupling (bottom adapter) for spindle and shaft and square cap (accord. to DIN3223 C or E) made of stainless steel AISI 304. Toolles assembly of the spindle extension with a stainless steel clip-pin. Connection pins made of stainless steel 1.4301. Transport security of the rod minimum of 150N. Self-locking in every adjustable position with a PE sealing collar on the steel tube. Torques up to 1000Nm (oval type wedge gate valve with square tube size 30mm). Three-piece PE protection tube system with an additional corrugated protection tube, bonded centring cap and either a universal combi bell (Form C) or a universal bell (size Ø80mm or Ø100mm (Form E)). Completely dirt-proof and water-repellent. Incl.: Marking disc (double sided gas and water) as well as a universal bell adapter/sealing insert.

A three-piece rod made of stainless steel 1.4301, coupling (bottom adapter) precision casting, galvanised accord. to DIN EN 12329 und DIN 50961 (alternatively made of stainless steel AISI 304), square cap (top adapter) (accord. to DIN 3223 E) made of GJS400-15, galvanised accord. to DIN EN 12329 and DIN 50961 (alternatively in stainless steel AISI 304). Toolless assembly of the spindle extension with a stainless steel clip pin. Connection pins made of stainless steel 1.4301. Transport security of the rod minimum of 150N. Self-locking in every adjustable position through a PE sealing collar on the steel tube. Torques up to 500Nm. Four-piece PE protection tube system with a bonded centring cap, universal combi bell with sealing/sealing insert and a grooved and suspension system as rotation lock. Completely dirt-proof and water-repellent. Incl.: Marking disc (double sided gas and water) as well as a universal bell adapter

This stainless steel rod, which is manufactured completely from stainless steel (Ø 42 mm), is used to install building components and (sub)structures on a roof surface. Our ABS UniMount is a flexible solution which can be used to install solar panels and photovoltaic modules, air conditioning systems and similar components. It can can either be installed on a concrete or steel surface. Base plate (130 x 130 mm) + welded-on mounting rod (Ø 42 mm) Female thread (M 10) at the top end For steel surfaces with a depth of at least 5 mm For horizontal and vertical loads of max. 3 kN Incl. stainless steel installation set

Body safety shower with valve, wall mounted, exposed pipework - shower arm ¾“ made of brass, chemical resistant powder coated, projection 625 mm - wall flange ¾” made of brass, chemical resistant powder coated, water inlet ¾” female - ball valve ¾“ made of stainless steel, with pull rod, DIN-DVGW tested and certificated - pull rod made of steel, chemical resistant powder coated, length 700 mm - high-performance shower head made of chemical resistant plastics, with improved spray pattern, corrosion resistant, largely scale and maintenance-free, very robust, self-draining - integrated automatic flow regulation 50 l/min. for a spray pattern acc. to the norms at a specified operating range of 1.5 to 3 bar dynamic water pressure - sign for body safety shower according to DIN 4844-2-D and BGV A8, self-adhesive 150 x 150 mm - installation height 2335 mm (+/- 100 mm) - according to DIN EN 15154-1:2006 - according to DIN 12899-3:2009 and ANSI Z358.1-2004 - DIN-DVGW tested and certificated

Body safety shower with valve, wall mounted, exposed pipework - shower arm ¾“ made of brass, chemical resistant powder coated, projection 625 mm - wall flange ¾” made of brass, chemical resistant powder coated, water inlet ¾” female - ball valve ¾“ made of stainless steel, with pull rod, DIN-DVGW tested and certificated - pull rod made of steel, chemical resistant powder coated, length 700 mm - high-performance shower head made of chemical resistant plastics, with improved spray pattern, corrosion resistant, largely scale and maintenance-free, very robust, self-draining - integrated automatic flow regulation 50 l/min. for a spray pattern acc. to the norms at a specified operating range of 1.5 to 3 bar dynamic water pressure - sign for body safety shower according to DIN 4844-2-D and BGV A8, self-adhesive 150 x 150 mm - installation height 2335 mm (+/- 100 mm) - according to DIN EN 15154-1:2006 - according to DIN 12899-3:2009 and ANSI Z358.1-2004 - DIN-DVGW tested and certificated

Body safety shower with valve, wall mounted, exposed pipework - shower arm ¾“ made of brass, chemical resistant powder coated, projection 625 mm - wall flange ¾” made of brass, chemical resistant powder coated, water inlet ¾” female - ball valve ¾“ made of stainless steel, with pull rod, DIN-DVGW tested and certificated - pull rod made of steel, chemical resistant powder coated, length 700 mm - high-performance shower head made of chemical resistant plastics, with improved spray pattern, corrosion resistant, largely scale and maintenance-free, very robust, self-draining - integrated automatic flow regulation 50 l/min. for a spray pattern acc. to the norms at a specified operating range of 1.5 to 3 bar dynamic water pressure - sign for body safety shower according to DIN 4844-2-D and BGV A8, self-adhesive 150 x 150 mm - installation height 2335 mm (+/- 100 mm) - according to DIN EN 15154-1:2006 - according to DIN 12899-3:2009 and ANSI Z358.1-2004 - DIN-DVGW tested and certificated

Body safety shower with valve, wall mounted, exposed pipework - shower arm ¾“ made of brass, chemical resistant powder coated, projection 625 mm - wall flange ¾” made of brass, chemical resistant powder coated, water inlet ¾” female - ball valve ¾“ made of stainless steel, with pull rod, DIN-DVGW tested and certificated - pull rod made of steel, chemical resistant powder coated, length 700 mm - high-performance shower head made of chemical resistant plastics, with improved spray pattern, corrosion resistant, largely scale and maintenance-free, very robust, self-draining - integrated automatic flow regulation 50 l/min. for a spray pattern acc. to the norms at a specified operating range of 1.5 to 3 bar dynamic water pressure - sign for body safety shower according to DIN 4844-2-D and BGV A8, self-adhesive 150 x 150 mm - installation height 2335 mm (+/- 100 mm) - according to DIN EN 15154-1:2006 - according to DIN 12899-3:2009 and ANSI Z358.1-2004 - DIN-DVGW tested and certificated