Hydraulics - Import export

We develop and produce hydraulic cylinders in various designs and performance classes. Whether as a prototype or in series production, we are happy to adapt to your wishes and requirements. Depending on the product application, we place the highest value on quality and functionality.

Typical areas of use for hydraulic gas spring are controlled opening and closing of hatches and hoods. The gas springs can also be adapted to control complete equipment such as ventilation apertures, chairs, beds, windows, tools and machinery.

Lifting arms  Convenient knob  J-hooks  Non-slip mat  Locking device

Cap 65mm/14 flutes: Toyota, Nissan  Cap 65-67mm/14 flutes : Ford, Mazda  Cap 68mm/14 flutes : Mazda, Ford, Subaru  Cap 73mm/14 flutes : Toyota, Audi, Rover, Lexus, Austin  Cap 74-76mm/15 flutes : VW, Audi, GM, Mercedes, Opel  Cap 75-77mm/15 flutes : Fiat, Renault  Cap 76mm/14 flutes : Motorcraft, Ford  Cap 76mm/30 flutes : Fiat, Lancia  Cap 80mm/15 flutes : Mazda, Subaru, Toyota, Honda, Nissan  Cap 80-82mm/15 flutes : Volvo  Cap 90mm/15 flutes : Fiat

The V310 is available as standard with a Y400 or Y1000 injection unit. It is distinguished by its very small footprint Machine features: - Clamping force: 1,100 kN. - Platen size: 335 x 400 mm. - Injection volume: 400 or 1000 cm³.

Rep studies your solution REP answers questions that cannot be resolved using conventional techniques. An "advanced" competence accompanied by the guarantees of the REP GROUP! A team of engineers is at your disposal for the study and realization of presses for special applications. A REP solution for every problem! We are able to meet your most complex requirements

Length of the cylinder retracted / extended / piston stroke: 390 / 1300 / 910 mm; Weight: 20,2 kg; Working/Test pressure: 16 MPa / 20 MPa; Outer diameter of the cylinder: 110 mm; Hydraulic connector: G1/2"; Volume of oil required: 3,5 L;

Lift castor system for a fast and flexible placing of plant and machinery or assembly tables; gear transmission ratio: 10:1 Max. Load: 500 kg per lifting unit Material: Housing: Die-cast aluminum with PTFE bearing Roller: Plastics PA with ball bearing Roller housing: Zinc plated steel Set: 4 lifting units 1 hydraulic drive unit 4 hydraulic pipes at each 3 m, pre-filled Extras: Other sets on request

HVD Mineral hydraulic oil for industrial and mobile systems that are subject to major temperature fluctuations and/or work under very high pressures. Benefits: High viscosity index. Good shear stability. Anti-wear additive on the basis of stabilised zinc. Excellent oxidation resistance. Very high filtrability. Very low pour point.

Hydro HVI Mineral hydraulic oil for mobile systems that are subject to major temperature fluctuations and/or work under very high pressures. Benefits: High viscosity index. Good shear stability. Anti-wear additive on the basis of stabilised zinc. Excellent oxidation resistance. Good filterability. Very low pour point.

Hydro S Mineral hydraulic oil for mobile systems for which a category HM hydraulic oil is prescribed. Benefits: Zinc-free anti-wear additive. Excellent oxidation resistance. Outstanding filtrability, even in the presence of water. Low pour point.

— Whitworth pipe thread DIN ISO 228- chambered O-ring — Seals FPM — Material AISI 316L (1.4404) — Temperature range: -4 to 248 °F (-20 to +120 °C) — Working pressure range: -14 to 232 psi (-0.95 to 16 bar) — Not designed for steady motion of the tube

— Whitworth pipe thread DIN ISO 228 — chambered O-ring — Seals FPM — Material AISI 316L (1.4404) — Temperature range: -4 to 248 °F (-20 to +120 °C) — Working pressure range: -14 to 232 psi (-0.95 to 16 bar) — Not designed for steady motion of the tube

- Metric thread- Chambered O-ring - Sealing NBR - Material brass nickel-plated - Temperature range -4 to 176 °F (-20 to +80 °C) - Working pressure range -14 to 232 psi (-0.95 to 16 bar) - Swiveling, but not designed for steady motion of the tube

- Whitworth pipe thread- Chambered O-ring - Sealing NBR - Material brass nickel-plated - Temperature range -4 to 176 °F (-20 to +80 °C) - Working pressure range -14 to 232 psi (-0.95 to 16 bar) - Swiveling, but not designed for steady motion of the tube

- Whitworth pipe thread DIN ISO 228 - Chambered O-ring - Seals FKM - Material with media contact: Brass, dezincification resistant - Material without media contact: Brass - Temperature range: -4 to 248 °F (-20 to +120 °C) - Working pressure range: -14 to 232 psi (-0.95 to 16 bar) - cooling water, air, vacuum - Stiff angular shape, can be locked with jam nut

Application The portable HD 2500 is designed for delivering high hydraulic pressure up to 2500 bar required for operating hydraulic tools, especially hydraulic tools for loosening and tightening the clamping connections provided at large diesel engines. Capacity hydraulic pressure up to 2500 bar. Drive medium Compressed air with at least 6 bar. Features The hydraulic pressure is adjustable up to 1500 bar. Up to four hydraulic tools can be supplied simultaneously.

Application The portable HD 1500 is designed for delivering high hydraulic pressure up to 1500 bar required for operating hydraulic tools, especially hydraulic tools for loosening and tightening the clamping connections provided at large diesel engines. Capacity hydraulic pressure up to 1500 bar. Drive medium Compressed air with at least 6 bar. Features The hydraulic pressure is adjustable up to 1500 bar. Up to four hydraulic tools can be supplied simultaneously.

The PTS2 series is designed for prototype production, die set-up and modification work (including drawing, bending and punching tasks). The DSP series is especially suitable for die spotting. The mechanical micro inching system provides an accuracy of 0,05 mm. Overview: ● Press capacity: 300-20,000 kN ● Application: die testing tryout and production start-up

The high-speed servo-hydraulic control of the mill screwdown closes the loop: The thickness values measured precise to the micrometre form the basis for quick and precise control. Vollmer offers solutions for all control concepts from simple feedback control through to complete mass flow control or Direct gap contol for rolling of wedge-shaped strip and in tandem mills. Vollmer supplies the complete control system – from the sensors through the control technology right up to the hydraulics and the cylinder – from a single source. For our customers that means having just one contact partner – in short: A one-stop solution.

Hydraulic

130cc HYDRAULIC BENT AXIS PISTON PUMP PRODUCT CODE: 11070130AIL4 (LEFT)/ 11070130AIR4 (RIGHT) HPT HYDRAULIC PISTON PUMPS 130cc HYDRAULIC BENT AXIS PISTON PUMP PRODUCT CODE: 11070130AIL4 (LEFT)/ 11070130AIR4 (RIGHT) HPTHYDRAULIC HYDRAULIC PISTON PUMPS

130cc HYDRAULIC BENT AXIS PISTON PUMP PRODUCT CODE: 11070130AIL4 (LEFT)/ 11070130AIR4 (RIGHT) HPT HYDRAULIC PISTON PUMPS 130cc HYDRAULIC BENT AXIS PISTON PUMP PRODUCT CODE: 11070130AIL4 (LEFT)/ 11070130AIR4 (RIGHT) HPTHYDRAULIC HYDRAULIC PISTON PUMPS,.

Hydraulic control valve groups needed by the users of FORD. It is easily assembled to the hydraulic body. In operating state it modifies damper location in any position. It is double output or it may be single output if requested.

We now make various hydraulic cylinders including arms, booms, buckets, dozers, rams, outriggers, lifts, tilts and side shift cylinders. By making our products with a self-made SRB (skiving roller burnishing) machine, their durability is better than existing products and they have a high-powered work performance. We make tubes with a maximum inner diameter of 250 mm, a maximum length of 3000 mm, and a maximum test pressure of 750 kgf/㎠.

Specifications/Approvals: High-performance HLP hydraulic oils in accordance with DIN 51524-2 with very good oxidation and wear protection, excellent air and water separation properties and low tendency to foam.

can no longer be sold, has expired for 6 years ; Dispose of according to Castrol Specifications/Approvals: High-performance HLP hydraulic oils in accordance with DIN 51524-2 with very good oxidation and wear protection, excellent air and water separation properties and low tendency to foam.