Induction motors - Import export

Advantages High-resistance: IP 55 motors with aluminum frame High efficiency: IE2 and IE3 class on direct on-line and inverters, NEMA Premium. Compact: Space-saving. General applications Available on short delivery.

"Focquet offers three-phase induction motors in cast iron or aluminum housings. The dimensions and power correspond to the values of a standard motor, but have been modified to allow braking applications. The disc brake is supplied with direct or three-phase alternating current by a rectifier located in the motor terminal block. Our solution is always a parking brake. Standard motor size and power rating, aluminum and cast iron chassis."

"Slip ring motors are often used in applications where the maximum transient torque must be greater than a conventional cage induction motor, such as quarries. SLIP RING MOTORS (OUR CODE: MB) - Three-phase wound rotor motors - Standard cast iron housing - Stored in IP55 protection and on request in IP23 - Stored in 230/400V from 22kW to 315kW , 400/690V to 560kW - Operating in 50/60hz - Other special voltages or insulation class H on request - Form B3-B5-V1- B35-V15 - Stored in S1 service or S3 service (6 starts per hour) - On request, we can supply motors for lifting applications with 1 or 2 cylindrical or conical axes - Standard motors equipped with PTC sensors - Equipped with roller bearings for belt drive - Electrolytic starters are stocked to start these motors"

"The world is changing and companies are under increasing pressure from environmental policies. An international standard was established in 2008 and updated in 2014 to classify the international energy efficiency (IE) of low-voltage three-phase induction motors. This is the IEC/EN 60034-30.1 standard. It reinforces the balance of international efficiency regulations. At Focquet, we have more and more IE4 motors to meet the needs of our environmentally conscious customers. We continue to invest heavily in this type of motor. OPEN VENTILATED MOTORS (OUR CODE: MOV) - Three-phase motors with cast iron cage - IP23 protection - Class F insulation - Heating class B - Legs molded in the casing - Stored in 230/400V - 400/690V - Operating in 50/60hz - Cooling IC01 - Other special voltages or insulation class H on request - Stored speed : 3000 rpm or 1500 rpm or 1000 rpm - Efficiency IE4 - Form B3-B5-V1-B35-V15 - Standard motors equipped with PTC sensors for all motors

"The world is changing and companies are under increasing pressure from environmental policies. An international standard was established in 2008 and updated in 2014 to classify the international energy efficiency (IE) of low-voltage three-phase induction motors. This is the IEC/EN 60034-30.1 standard. It reinforces the balance of international efficiency regulations. At Focquet, we have more and more IE4 motors to meet the needs of our environmentally conscious customers. We continue to invest heavily in this type of motor. STANDARD CAST IRON IE4 MOTORS: - Three-phase motors with cast iron housing - IP55 protection - Class F insulation - Heating class B - Stored in 230/400V - 400/690V or 500V - Operating in 50/60hz - Other special voltages or insulation class H on request - Stored speed: 3000 rpm or 1500 rpm or 1000 rpm or 750 rpm - Efficiency IE4 - Form B3-B5-V1-B14-B35-V15-B34 - Standard motors equipped with PTC sensors from size 132 onwards - ...

AViTEQ Unbalance motors can be used as drives for almost each case of application in the vibration feeder technology and over all industries. Unbalanced motors are the prefered drive system, in particular if it depends on high throughput of bulk material. Advantages and benefits available as standard for explosion proofed ATEX zones 21+22 available as standard for CSA-apllication "Class 1 + 2" available as standard with thermistor operationally safe in continuous employment high level of performance with compact dimensions efficiency latest state-of-the-art of technology and production conformity with all EC Guidelines which affect the drives available for 60 Hz power systems and other mains voltages Construction and operation mode The AViTEQ unbalance motor is a three-phase ac induction motor, on which weights are eccentrically attached at the ends of the running shaft; so-called eccentric weights (flyweights). Centrifugal forces are generated with rotating waves. The value of these

A robust and versatile power tool tailored for heavy-duty household tasks. With its 1800W induction motor, it delivers a maximum pressure of 140 bar, making it ideal for a wide range of high-pressure cleaning applications. Its ergonomic design ensures comfortable, fatigue-free operation even during extended use. The RP-0140 excels in heavy-duty household chores such as rust removal, descaling, paint stripping, and tackling greasy and oily residues. When it comes to convenience, this high-pressure washer doesn't disappoint. Despite weighing 14.7kg, its ergonomic design, coupled with attached wheels and handles, facilitates effortless transportation. If you're considering adding a high-pressure washer to your store's inventory, the Ronix RP-0140 is an excellent choice that will satisfy your customers.

Two-wheel cart with handle Triplex pump with ceramic pistons and connecting rod system Automatic pressure bypass valve with pressure relief from the pump head Three-phase induction motor with Thermal protector Pressure adjustment Gauge pressure Integrated detergent suction Adjustable detergent injector Electric cable length 5 m

Two-wheel cart with handle Triplex pump with ceramic pistons and connecting rod system Automatic pressure bypass valve with pressure relief from the pump head Three-phase induction motor with Thermal protector Pressure adjustment Gauge pressure Integrated detergent suction Adjustable detergent injector Electric cable length 5 m

Heavy-duty 2-wheel cart with handle Triplex pump with ceramic pistons and Connecting rod system Automatic pressure by-pass valve with pressure relief from pump head Three-phase induction motor with Thermal protector Adjustment Pressure gauge Flanged pressure relief Integrated detergent suction Adjustable detergent injector Built-in detergent tank with 3L capacity Inspectable water filter Electric cable length 5 m General characteristics Standard accessories

When an initial inspection shows that a repair is not economically feasible, Maintenance Partners can offer you new equipment. This allows us to provide you with a complete solution, even when a replacement is required. We have agreements with various manufacturers and distributors of rotating equipment and can supply: Electric motors Mechanical seals Pumps Gearboxes Gemex Supply of new Electric Motors We supply new electric motors of any brand, such as WEG, ABB, Svend Høyer, Rotor, TECO and Ansaldo. This allows us to provide you with new electro motors in any segment and type. Certified Service Center for WEG Maintenance Partners has been certified as Service Center for WEG . This certification means that Maintenance Partners is an authorized repair workshop for: Induction Squirrel Cage HV Motors Synchronous Machines and Generators DC Motors Field Service This cooperation guarantees that repairs performed by MP meet WEG’s quality standards. Besides this, short lead times and...

When an initial inspection shows that a repair is not economically feasible, Maintenance Partners can offer you new equipment. This allows us to provide you with a complete solution, even when a replacement is required. We have agreements with various manufacturers and distributors of rotating equipment and can supply: Electric motors Mechanical seals Pumps Gearboxes Gemex Supply of new Electric Motors We supply new electric motors of any brand, such as WEG, ABB, Svend Høyer, Rotor, TECO and Ansaldo. This allows us to provide you with new electro motors in any segment and type. Certified Service Center for WEG Maintenance Partners has been certified as Service Center for WEG . This certification means that Maintenance Partners is an authorized repair workshop for: Induction Squirrel Cage HV Motors Synchronous Machines and Generators DC Motors Field Service

Kom is used to distribute warm air to rooms using insulated ducts. Suitable for continuous operation. It is equipped with a thermostat that allows you to adjust the activation temperature. The modern design of the turbine ensures high efficiency and reliability. Single-phase asynchronous induction motor adapted to speed regulation, thermally protected. Casing made of galvanized sheet steel resistant to corrosion and mechanical damage, insulated with mineral wool.

nduction Heating and Joining in one turnkey system. This turnkey system is used to heat electric motor housings with various dimensions for a wide range of joining processes. Example Heating System 1: the die-cast aluminium housing for an asynchronous motor (diameter 450 mm) is heated to approx. 290°C in approx. 5 minutes to fit the wound stator package. The parts are loaded and unloaded from the feeding belt parallel to the working time. The heating process takes place in two independent work stations. The generator has a switched output which means that only one generator is required for the two heating stations. The system is controlled using a SIEMENS PLC controller. Example Heating System 2: the aluminium housing (diameter 140 mm) of a synchronous motor is heated to approx. 280°C in approx. 3 minutes to fit the stator. The component is loaded into and unloaded from the heating station semiautomatically. The system is controlled using a PLC.

Traction inverter with fluid cooling and rated power up to 500 kW is designed to control induction and permanent magnet motors of electric vehicles.