Industrial heating - installation and materials - Import export

Screw-in heaters are versatile and intended for heating liquid media in industrial and commercial applications. When selecting, the specific surface load permitted for the respective medium must be observed and checked by the customer. EHK G1 1/2 are mainly used to heat water and aqueous solutions. 3 tubular heating elements ø 8,5mm made of stainless steel 1.4404 resp. Incoloy 825 brazed in G1 1/2″ thread made of brass (lead free) or stainless steel. Connection to 230/400 V3 (N), rotatable stainless steel terminal box. Use e.g. in washing machines, dishwashers, tempering equipment, laboratory equipment. The heaters are also suitable for water heating with photovoltaics, primarily the EHK G1128xxx series. Combination with all common PV controls possible, stepless power output. Type EHK G112-A with built-in thermostat 0-95°C Type EHK G112-AB with built-in thermostat/limiter 30-80°C / 100°C Type EHK G112-U without integrated control unit

Screw-in heaters are versatile and intended for heating liquid media in industrial and commercial applications. When selecting, the specific surface load permitted for the respective medium must be observed and checked by the customer. EHK G2 are mainly used for heating hydraulic oil in containers in which the replacement of the heating cartridge without draining the medium must be possible. Ceramic heating cartridge in stainless steel tube ø 50mm, material-no. 1.4512 or material-no. 1.4404. G2″ thread SW70 welded from V2A. Terminal box made of PA6-GF30, impact-resistant and oil-resistant, degree of protection IP66/67. Unheated zone 50mm, surface load 1,5 W/cm², voltage 230/400 V. Special versions on request.

It distinguishes itself from its competitors with its 92% burner and 60-68% luminous efficiency. Aluminized reflectors are used for high luminous efficiency. For ease of use, remote control and double step options are offered. It can be assembled as L /U type according to the project. Aluminized tubes allow long years of trouble-free operation without the need for a special maintenance program. Usage areas: Factories, Hangars, Cafes, Restaurants, Greenhouses, Workshops, Fairgrounds, Showrooms, Gyms, Warehouses, Service Stations, Tennis Courts, Open Spaces Technical FeaturesCTP L Model 20 L - 30 L - 40 L - 50 L - 60 L - 70 L Device Capacity (Kw) 20,3- 30,5 - 40,7 - 50,1 - 60,5 - 69,8 Natural Gas Consumption (Nm3/H) 2,12- 3,18 - 4,25 - 5,23 - 6,31 - 7,27 Recommended Mounting Height (mm) 3.4- 3.5 - 4.9 - 5.5 - 6.4 - 6.8

TEPLOPANEL climate system is based on principle of thermal infrared radiation. Infrared waves, without air heating, turn into heat while contacting with the surface of objects and people. Thus, the heated objects emit heat secondary and give it to the air by means of convection. The heat carrier in the radiant panels is classical preheated water. Thus, the water radiant panel is the best and the most effective energy saving infrared appliance, as it operates with water of up to 95°С. Water heating source operates on any type of fuel: gas, electricity, wood, pellets, waste oil, central heat supply. TEPLOPANEL system provides fast room heating, has low lag effect in comparison with any convective systems. Low temperature of heat distribution creates uniform temperature in the room and allows to use infrared heaters in fire-hazardous objects. It enables to save up to 52% expenses of the energy carrier compared to air heating appliances. The higher the room the more savings you achieve.

Electric infrared ceiling panels TEPLIY KVADRAT are low-temperature radiants for efficient heating of residential & office premises up to 4 m high. The system is based on principle of thermal infrared radiation. The advantage of transferring heat by radiation is the immediate effect of heating surfaces of objects that absorb heat from the panels, without preheating the air around them. Thus, all objects in the premises are heated, including floor, walls, furniture, equipment, etc. The heated objects emit heat secondary and give it to the air by means of convection. So, the system provides fast room heating, has low lag effect in comparison with any convective systems. Low temperature of heat distribution creates uniform temperature in the room. TEPLIY KVADRAT panels are designed for comfortable and energy-efficient heating of any kinds of rooms, except rooms with high humidity. The panels can operate directly from the socket or standard thermostat-controller.

TEPLOPANEL climate system is based on principle of thermal infrared radiation. Infrared waves, without air heating, turn into heat while contacting with the surface of objects and people. Thus, the heated objects emit heat secondary and give it to the air by means of convection. The heat carrier in the radiant panels is classical preheated water. Thus, the water radiant panel is the best and the most effective energy saving infrared appliance, as it operates with water of up to 95°С. Water heating source operates on any type of fuel: gas, electricity, wood, pellets, waste oil, central heat supply. TEPLOPANEL system provides fast room heating, has low lag effect in comparison with any convective systems. Low temperature of heat distribution creates uniform temperature in the room and allows to use infrared heaters in fire-hazardous objects. It enables to save up to 52% expenses of the energy carrier compared to air heating appliances. The higher the room the more savings you achieve.

Aluminum reflectors are used for high luminous efficiency. It provides many years of trouble-free operation without the need for special maintenance programs. For your safety, there is a safety system with a buzzer against a malfunction. Usage areas: Factories, Workplaces, Warehouses, Hangars, Service Stations, Mosques, Sanctuary, Farms, Outdoor and other places. TECHNICAL FEATURES Product Code - 1st Power - 2nd Power -NG Consumption -Hanging Height**(H) ECO L5 - 6 kW - 11 kW - 1,15 m³/saat - 2,5 m ECO L10 - 11 kW - 18 kW - 1,90 m³/saat. - 3,5 m ECO L14 - 16 kW - 26 kW - 2,73 m³/saat - 4,5 m ECO L18 - 20 kW - 32,1 kW - 3,37 m³/saat - 5,0 m Natural Gas Pressure 20-55 mbar Gas Connector Diameter 1/2’’ Electric Voltage 220-240 V

TEPLOPANEL climatic cassette-type panels operate on principle of thermal infrared radiation. Infrared waves, without air heating, turn into heat while contacting with the surface of objects and people. Thus, the heated objects emit heat secondary and give it to the air by means of convection. Functionally it is a low-temperature energy saving infrared emitter. The heat carrier is water preheated by any hot water boiler, central heat supply or alternative source (for example, heat pump). Thus, the water radiant panel is the best and the most effective energy saving infrared appliance, as it operates with water of up to 95°С. Water heating source operates on any type of fuel: gas, electricity, wood, pellets, waste oil, central heat supply. TEPLOPANEL system provides fast room heating, has low lag effect in comparison with any convective systems. Low temperature of heat distribution creates uniform temperature in the room and allows to use infrared heaters in fire-hazardous objects.