Switches - Import export

We offer a large standard assortment of high-quality tactile short-stroke switches or micro switches and micro switches. The switches and pushbuttons are characterised by a high level of workmanship and a long service life (up to 1 million cycles). The microswitches are used in medical technology, industry, entertainment technology and in the automotive sector and are suitable for PCB assembly. They are supplied on a roll. If your desired specification is not available in our standard range, please feel free to contact us at any time. Completely customised developments are also possible.

NSPV Weather Protected AC Isolating Switches The IP66 Weatherprotected Isolating Switches is a robust range of switches suitable for virtually any external application. Fixed Earth and Neutral connector bars with dual clamping screws per tunnel provide equal stripping lengths and secureclamping for all cables. Terminal bore size is 5 x 6.6mm. Included in the range are 1,2, 3 and 4 pole switches from 20 to 80 Amps. And the colour include white and grey.The basemounted mechanism provides for easier termination and more wiring room. Switch dimensions are 165mm x 82mm with anoverall height of 85mm. A safety feature for mounting switches to metal structures is the insulating caps that cover base mounting screws to totallyprotect them from any live cables. Dual 25mm screwed conduit entries top and bottom (up to 55 amp.) allows four ways to surface wire the switch. 55 amp.and above are also available with 32mm entries top and bottom.

The electronic temperature switch of BEDIA is fitted with thin-film resistor Pt 1000 in a bridge circuit. This sensor element provides close switch point tolerances and a quick response. Switch point and reset hysteresis may be selected within the admissible operating range when ordering so as to allow the monitoring of both very wide and very close temperature ranges. The switching output is protected from short-circuit and overload. The short-circuit current is limited by the output transistor switching off inthe event of a fault. It will automatically reset as soon as the fault has been remedied. The switch is available with ground-connected, plus-connected or potential-free DC switching output. The switch is open in the event of power failure or disconnection of the power supply, independed of the switching function. It is available both as normally open (NO) or normally closed (NC) switch.

These high-power bimetal operated temperature switches are available either with normally closed (NC) or normally open (NO) contact configuration. The robust round metal enclosure accommodates a resilient preloading disk, a bimetal disk and a silver contact. The compact switch system is covered by means of a plate which also carries a silver contact and is isolated from the enclosure by means of an isolating washer. The resilient preloading disk ensures excellent performance. The resilient preloading disk keeps the contact pressure constant throughout the entire temperature range of the BEDIA switch until switching occurs. The mechanically and electrically unloaded bimetal disk snaps over at a preset temperature, with either opening or closing the contact arrangement. The bimetal will only snap back to its initial condition after the temperature has dropped significantly.

NSPV 2P/4P/6P/8P Solar DC21B Isolator Switch Features: TUV certified; Assemble conveniently; All wiring operations are not in the same direction to improve tool usage, reduce occupied space for product, and more convenient to replace and maintain. Description: This isolator switch is used in solar photovoltaic system, the voltage can reach 1500VDC; the mechanism of the switch move fast, breaking the contact quickly; the category is DC21B.

NSPV DC switch enclosure NEISO-32 type DC ISO SWITCH features IP66, UV resistant, IEC/EN60947-3 which Uimp=4kV, Ui=1000VDC and category for DC-21B.

In order to meet the demands for robustness and efficient heat output, we have embroidered the heating element on a glass mesh fabric carrier material. Between the meandering arrangement of the heating strands, we integrate a recess for the temperature switch in the CAD layout. In addition, a second wire is laid concurrently as a PTC thermistor for the electrical connection of the safety switch. After the technical embroidery process, the safety switch is inserted and connected by our company’s respective department. Each prefabricated element is tested for functionality and performance in the final inspection and is delivered to the customer after passing the test. As a semi-finished product, the infrared heating element on glass mesh fabric can be further processed by the customer, e.g. in connection with silicone, rubber or epoxy resin.

Our range of vandal resistant pushbuttons is very wide to offer you the best possible choice. With our handy configurator you can quickly and easily put together the perfect pushbutton for your needs and request it directly. New: an individual engraving of the push-button cover is possible for push-buttons of the S1AGQ series with mounting diameters of 16mm, 19mm and 22mm. In addition to the individual configuration of our three basic series, we also offer you the option of manufacturing completely customized pushbuttons in individual colors, engravings and adapted technical specifications. Simply send us your desired requirements by e-mail. Our engineers will configure your suitable pushbutton and send you an offer. If you have any questions, we will of course be happy to answer them and provide you with comprehensive advice on selecting the right pushbutton for your application.

For disconnection of electrical power wrenches in connection with GMV2 100 - 240 V / 50 - 60 Hz switching capacity approax 16 A protection IP40 Safety plug

For disconnection of electrical power wrenches in connection with Value Master Base or GMV2 100 - 240 V / 50 - 60 Hz switching capacity approax16 A protection IP64 Safety plug

The aluminium pressure die-cast protective shroud (F3: aluminium sand casting) fully shields the pedal at the top and sides while the wide base provides a high degree of stability. It reliably prevents accidental operation from above by falling objects or careless operation from the side. Due to its robust construction the protective shroud withstands a drop of 20 kg from a height of 1 m. The foot switch is uniquely designed to allow inclusion of additional equipment: — Emergency Stop button — Contactor on DIN rail as main power switch — Customized installations (e.g. light indicators)

BERNSTEIN AG manufactured SR and SRM safety cable pulling switch devices as per IEC 947-5-5, DIN EN 60947-5-5 and ISO 13850 standards. These technical demand that when 'actuation' or the act of the breakage of the cable, there is automatic lock out as the switch moves to stop position, and reset for further use.

These basic enclosures are of similar dimensions except for its width that come in the variance of one, two and three pedals.

Impressive development of the SHS series is assured with the design of the SHS3 switch. Having to replace the safety hinge switch whenever the equipment is bumped or damaged due to mechanical stress is unnecessary thanks to the solution offered by the SHS series. The hinge setting can be corrected even after the switching point is set. This process can be done with the assistance of the integrated adjustment system. The hinge switch is also reusable even when the system itself needs to be converted. Thanks to change kits, the operator can redefine the switching point without compromising the IP 67 protection rating.

The SK safety position switch is an industry standard and can be used in virtually any application. Its versatility is improved by the variable actuator head and two actuator openings. The design safety attributes befitting to VDE 0660 T200, IEC 60947-5-1 and the test regulations GS-ET 15, the SK is particularly qualified for personal protection applications. Actuators can be repositioned by 180 degree. Two actuators openings which designs horizontal as well as vertical operation possible. This product has a high standard quality and very reliable as well as user friendly device. Additionally, had meet the requirements for its excellent quality.

Thanks to their standard dimensions as well as the wide range of contacts and actuators, the IN65 switches can be used on safety facilities and for position monitoring in virtually any industrial application. The modularity allows for great flexibility, enabling individual customer solutions to be realised. Due to the metal actuator locking and mounting clip the product is particularly robust. The IN65 ideally combines the economic advantages of a plastic bodied switch, with the sturdiness of a metal bodied one. Standard switches conforming to DIN EN 50047 Modular design High reliability at low currents (1 mA) Tool-free turning and changing of actuator Metal actuator locking Metal mounting clip Protection class IP66 and IP67 Hinged snap-on cover

Thanks to their standard dimensions as well as the wide range of contacts, the IN62 switches can be used on safety facilities and for position monitoring in virtually any industrial application.Only available with plunger actuator. Standard switches conforming to DIN EN 50047 High reliability at low currents (1 mA) Protection class IP67 Hinged snap-on cover

BERNSTEIN offers the user coordinated coded magnetic switches and corresponding actuators. With suitable evaluation (e.g. BERNSTEIN MÜZ), the sensor fulfils the requirements of DIN EN 60947-5-3 and is therefore suitable for safety-related monitoring of doors, Protective guards and flaps in accordance with DIN EN 14119 and DIN EN 13849. — Manipulation protection through coding (multicode) — Redundancy through NC and NO contacts — Cannot be operated with conventional magnets — Cable versions in 3m, 6m and 9m or plug version — Sturdy plastic enclosure

Due to the space-saving enclosures and the high protection class the position switches of the M49 series are perfect for an installation where a flat design and a high protection class of IP67 is required. — Flat and compact design — Pre-installed connecting cable (1m length) for quick and easy installation — Top-mounting versions available — Cable outlet on the side or at the bottom — High protection class IP67 — Suitable for safety applications according to DIN EN 60947-5-1 (positive break) — Different cable lengths available on request

The position switches MN78 are the successful answer to an increased demand of the market. The contacts of these new series are specially designed for switching low currents. The MN78 is a completely metal version of the position switch, which scores points for reliably fulfilling its task even in harsh environments, outdoors or under high mechanical stress. • High reliability at low currents (1 mA / 24 VDC) • Up to 4 contacts • Enclosure: Die-cast aluminium • Cover: Aluminium • Easy turning (8 x 45° ) and changing of the actuators without a tool • Standard switch and standard actuator according to DIN EN 50041 • Protection class IP66 and IP67 according to EN 60529

Our SEL series door contacts offer you a particularly long mechanical service life. They are available in three different versions with separate actuator. You can also choose between four different actuator variants. Due to its elastic design of the contacts, the contact plates are mechanically moved with each actuation; this causes a cleaning effect by the actuator. Dirt, dust, and possible oxide layers are rubbed away – the electrical contact is made reliably. — Door contact with contact plates or contact pins — Mechanical lifetime: more than 10 million switching cycles — Protection class IP20

The SHS combines a hinge and safety switch in one single functional unit. — System up to performance level e: 2 SHS, each equipped with a positively opening safety contact — The angle range extends from 0° to 225° — Safety device ensures positive locking after the switch has been set

With very slim dimensions and overall IP67 protection, the I49 switches are a perfect solution for either position indication or safety applications. — Flat design — Highly flexible deployment — Reliability — Simple and quick installation — Compact IP67 switch for safety applications

It has a long track record as a position detection switch for Steel equipment, chemical plant equipment, cranes for cement manufacturing equipment, and carts, and contributes to improving poor contact. A limit switch that uses Bestact (R25) for the built-in contact. It is resistant to environmental influences such as dust, gas, high temperature, and high humidity, and has outstanding contact reliability. Demonstrates reliability in a wide range of applications, from signal-level minute current circuits to inductive load switching power circuits.

A separate type proximity switch that uses Bestact for the built-in contact. It is less susceptible to environmental influences such as dust, gas, high temperature, and high humidity, and has outstanding contact reliability. It has a long track record as a position detection switch for Steel equipment and chemical plant equipment, and contributes to the improvement of poor contact. The switch body is threaded for easy mounting and position adjustment. (*PSMS-RV4G1THL type has a band attached) Non-contact drive using magnets eliminates mechanical wear and has a long service life. It is economical because no power supply is required for driving.

A separate type proximity switch that uses Bestact for the built-in contact. It is less susceptible to environmental influences such as dust, gas, and high humidity, and has outstanding contact reliability. Non-contact drive using magnets eliminates mechanical wear and has a long service life. No power supply is required for driving.

It has a long track record as an Elevator landing switch and door zone switch, and contributes to the improvement of poor contact. By shielding the magnetic field of the magnet with a magnetic vane (1.6 mm or more), the output of the contact is switched, so no external power supply is required. Non-contact drive using magnets eliminates mechanical wear and has a long service life.

YASKAWA Power Reed Switch Bestact "Bestact" is the best contact "Best Contact" with excellent environmental resistance, durability and maintainability, filled with inert gas in a glass tube. Bestact and products with Bestact built-in have been proven to be highly reliable in a variety of operating environments compared to other companies' products. From the social infrastructure field to the General industry field, we respond to control mechanism devices that achieve high reliability, high safety, and easy maintenance along the life cycle of control systems. It has a track record of About 40 years of use in high-speed railways around the world, especially in Japan, and is still used in markets around the world.

With rotary control, two-way switch and soft-catch. 2-wire connection (neutral conductor not required) Optimised for dimming of retrofit LED lamps (LEDi). For dimmable Retrofit-LEDs (LEDi). For dimmable Retrofit-LEDs (LEDi) with conventional or electronic transformers. For incandescent lamps, 230 V tungsten halogen lamps, low-voltage halogen lamps with conventional or electronic transformers and dimmable energy-saving halogen lamps. Mix operaton of LEDi with conventional loads possible. Via mode switch adjustable between leading edge control and trailing edge control. Low-noise level by MOSFET transistors. With electronic short-circuit protection. With electronic overload protection. With adjustable minimum brightness. Without cover plate. Rated voltage: 230 V~, + 10% / - 10% Rated frequency: 50 Hz/60 Hz Nominal power: 2 - 100 W/VA (retrofit LED loads). Nominal power: 10 - 250 W/VA (non-LED loads).