Measurement equipment and instruments - position and distance - Import export

Particular Challenge: For the assessment of rotating parts, numerous parameters have to be taken into consideration: Concentricity, radial run-out and axial run-out (i.e. wobble); furthermore thickness, diameter, planarity and the absence of surface defects had to be examined. The solution developed by QuellTech consists in a configuration of three Q6 Laser Laser Scanners.Each of the lateral surfaces is assigned to its own scanner. In order to enable the thickness precisely to be determined, both laser lines are mutually oriented in opposite direction. The third scanner inspects the outer circumference of the wheel, this way measuring diameter and radial run-out. All of these scanners are subject to encoder signals supplied by the rotary axis and synchronously triggered, so possible defects on the wheel can precisely be localized. The measurement takes place at a resolution of ca. 30 µm, and a cloud comprising several millions of points are obtained.

The high-performance optoNCDT ILR2250 laser distance sensor is used whenever large measuring ranges and high accuracy are required. The optoNCDT ILR2250 can be installed at distances up to 100 m, and even up to 150 m with a reflector film. This sensor impresses when measuring dark, structured and poorly reflecting surfaces, while providing stable measurement results to millimeter accuracy. The optoNCDT ILR2250 laser distance sensor is used in transportation, logistics and conveyance technologies as well as automation and the metals industry. This is where the sensor enables reliable measurement results even when it is, e.g., installed at a safe distance from heat emitting measuring objects. In addition, difficult-to-access places via mirrors or through glass sheets can be detected.

Designed for extreme ambient conditions, the sensors of this EGE product family have been proven for more than 40 years in the most varied areas. The proximity switches are based on the conventional inductive principle and switch when a metallic object moves close. These inductive sensors cope without problems with constantly changing temperatures, flooding, vibration, cleaning processes using high pressure cleaners and temperature up to 120°C. These properties are, for example, in demand when used in the steel industry. Because our sensors are always flushed with rolling emulsion during operation, the chemical resistance of the materials used and a high IP class are also essential. They are also ideal for outdoor applications.

Converts the angular position of a shaft into a load independent direct current signal, proportional to the angular shaft position. • Robust transmitter for angular position suitable for field applications • Highest degree of mechanical and electrical safety • Proven capacitive scanning system • No wear, low annual maintenance and mountable anywhere • Vibration and shock-resistant • Measuring range, sense of rotation, zero position and linear/V-characteristic can be adjusted by a switch and two push-buttons • Analog output signal 4…20 mA, 2-wire connection • Zero position and end position are independently adjustable • Capacitive scanning system provides absolute position immediately after activation • Suitable for ocean-going vessels acc. GL

The transmitter converts the tilt angle into a direct current signal, proportional to the angle. Tilt angle values of a platform stand for important measuring data as a part of the safety and control system of that type of machinery. • Robust magnetoresistive angular position transmitter with interface SSI, contact free, freely rotatable without stops • With oil-damped pendulum system • The sensor is contact free and has minimal abrasion on the pendulum • Measuring range, sense of rotation, zero position and measuring span programmed directly at the transmitter

The transmitter converts the tilt angle into a direct current signal, proportional to the angle. Tilt angle values of a platform stand for important measuring data as a part of the safety and control system of that type of machinery. • Robust magnetoresistive CANopen angular position transmitter, conctact free, freely rotatable without stops • With oil-damped pendulum system • The sensor is contact free and has minimal abrasion on the pendulum • Pendulum shaft has no mechanical stops and can be 360° infinitely rotated • Reduced wiring expenditure • Autoconfiguration of the network • Comportable access of all instrument parameters • Instrument synchronisation, simultaneous data read-in and read-out

The transmitter converts the tilt angle into a direct current signal, proportional to the angle. Tilt angle values of a platform stand for important measuring data as a part of the safety and control system of that type of machinery. • Robust magnetoresistive angular position transmitter, conctact free, freely rotatable without stops • With oil-damped pendulum system • The sensor is contact free and has minimal abrasion on the pendulum • Measuring range, sense of rotation and zero position programmed directly at the transmitter

• Robust transmitter for angular position suitable for field applications • Highest degree of mechanical and electrical safety • Capacitive scanning system provides absolute position immediately after activation • Measuring range and sense of rotation can be adjusted by a switch and two push-buttons • Zero position and end position are independently adjustable • Linear and V characteristic of the output value free programmable • No wear, low annual maintenance and mountable anywhere • Vibration and shock-resistant • Analog output signal 4…20 mA, 2-wire connection • Explosion protection acc. ATEX and IECEx • Suitable for ocean-going vessels acc. GL

• Robust transmitter for angular position suitable for field applications • Highest degree of mechanical and electrical safety • Proven capacitive scanning system • No wear, low annual maintenance and mountable anywhere • Vibration and shock-resistant • Measuring range (zero point and end position) and sense of rotation via Modbus/TCP adjusted

The KINAX N702-INOX Series of Tilt Sensor, manufactured by Camille Bauer Metrawatt AG, is specifically designed for robust heavy-duty utilization. This device is configured as a high robust and absolute inclination transmitter. It is mainly suitable for hostile areas applications. Moreover, this tool is made from sealed stainless-steel enclosure design and has an intense mechanical strength to generate more efficiently, and offers high installation versatility.

The MR-21 measuring wheel has a quality counter that accurately records distances in the running direction and in the opposite direction. The run rubber is ground at exactly 318.5 mm diameter with a convenient zero-setting lever next to the counter.The MR-21has a maximum accuracy of 0.02 percentand is certified with a test label. The frame of the measuring wheel is welded by robot to ensure consistent quality over time, and the device also includes an auxiliary arm and an integrated brake. In addition, the quality indicator is "made in Germany" and is conveniently located over the running wheel for easy reading. The folding guide rod is aluminum and the device is equipped with a spoke wheel.

Due to the 4x zoom accurate measurements from long distances up to 80 meters are allowed, with the ability to offset +/- and stake. The color display is rotatable and data can be exported via Bluetooth and USB.