Polyurethane rollers and wheels - Import export

Thermoplastic injection-moulded polyurethane (TPU) based on polyesterpolyol, diisocyanate and glycol. This is vibration-absorbing, non-marking, non-staining and highly abrasion-resistant, while also providing good floor preservation. The tread is also resistant to a wide range of aggressive substances, although it has only limited resistance to hot water or steam.

The polyurethane-elastomer Blickle Softhane® is one of the four polyurethane treads developed by Blickle. The positive characteristics of the tread are the end result of many years of optimisation. The extra-thick elastic tread guarantees excellent operational comfort. It is especially gentle on the floor, abrasion-resistant and quiet. The green colour does not leave any tracks and is also non-staining. Softhane® is resistant to a wide range of aggressive substances, with the exception of aromatic solvents, hot water or steam.

Besthane® treads have 40% lower rolling and swivel resistance than the other polyurethane treads. This means that much less force is required to push or pull transport units carrying heavy loads. It also makes the series particularly interesting for customers focused on ergonomics and occupational safety. Besthane® tread also provides a particularly high level of dynamic load resistance, which is particularly useful when transporting sensitive materials. The tread is typically used for a variety of heavy duty applications on different transport units and machines in the machining and automotive industry. It can provide a load capacity of up to 12,000 kg at high speeds of up to 16 km/h.

The formula was optimised until Besthane®Soft provided the desired characteristics: exceptionally high operational comfort, a high level of floor surface preservation, low-noise operation and a particularly high dynamic load capacity. This series is also abrasion-resistant, oil-resistant and flexible at low temperatures. The casted tread is used with either an aluminium or nylon wheel centre. The nylon version is also hydrolysis resistant.

The Extrathane® tread was developed on the back of Blickle’s decades of experience in this area to meet market demand and provide an outstanding set of characteristics. The tread is highly abrasion-resistant and has a high resistance to cut and tear propagation. This means that heavy duty wheels and heavy duty castors which use Blickle Extrathane® tread are also suitable for crossing thresholds and medium speeds.

MANUAL PALLET TRUCK LOAD 2200 Kg - forks mm. 1150x525 and mm. 800x525 (short) The hand pallet trucks of the Ferplast FPGS ECO 2200 series, with a load of 2200 kg, are robust and designed for use in industrial environments. They are characterized by: - Structure in drawn sheet steel with rounded fork tips. - Hydraulic unit built in cast iron with integrated oil tank to prevent leaks and rustproof chromed piston - Lifting with drawbar activation and automatic return to vertical position. - Safety valves for lifting and overload limit switches. - Immediate descent release valve - Directional wheels diameter 200 mm, in rubber. - Ergonomic tiller with 2 curves The FPGS ECO 2200 model with fork length mm. 1150 can be equipped with a single loading roller (model FPGS ECO 22/1150-1) or double loading roller (models FPGS ECO 22/1150-2). The loading rollers are made of polyurethane with a diameter of mm. 82 and ball bearings.

Due to its abrasion resistance and durability, polyurethane is well suited for use in the conveyor industry. Support rings for support rollers made of polyurethane are characterized by a very high wear resistance. In addition, the material is largely resistant to mineral and vegetable oils.

The D-FLEX wheels are manufactured through a new vacuum - dryer - high pressure process, entirely developed by DC, which results in the higher quality wheel in its range of products, and the only one to be covered by a lifetime warranty** against the de-bonding of the elastic Polyurethane tyre from the wheel centre, plus they grant a high cut and tear propagation resistance. Combines the load capacity and the resistance to wear and tear of the polyurethane with the ability to overcome obstacles and to reduce noise, vibrations and impacts of the elastic rubber. The Polyurethane tyre is mechanically bonded to the wheel core, and the coupling is further strengthened by a surface adhesion which is obtained without the use of any glue or chemical bonding. Recommended on trolleys for food industry and chemical industry, industrial trolleys, equipment and trolleys for meat and fish industry, slaughterhouses, pharmaceutical industry, floor-washing machines and scrubbers, and for traction.

The D-NAMIC wheels are manufactured through a new vacuum - dryer - high pressure process, entirely developed by DC, which results in the higher quality wheel in its range of products, and the only one to be covered by a lifetime warranty against the de-bonding of the Polyurethane tyre from the wheel centre. The Polyurethane tyre grant a high cut and tear propagation resistance, is mechanically bonded to the wheel core, and the coupling is further strengthened by a surface adhesion which is obtained without the use of any glue or chemical bonding. The D-NAMIC wheels can be fitted into a specific series of brackets for which are specifically studied and produced to fulfill the extremely wide variability of conditions to which they are submitted, for both industrial and food industry. D-NAMIC are recommended on trolleys for food industry and chemical industry, industrial trolleys, equipment and trolleys for meat and fish industry, slaughterhouses and textile industry.

In our extensive product range you will find high-quality wheels with foamed polyurethane tyres on plastic or sheet steel rims, in various sizes and designs - also ideal for industrial applications. Our PU tyres are made of solid material and are therefore absolutely puncture-proof. Nails, splinters and shards cannot harm the tyre. The wheels offer a high level of driving comfort, even on uneven floor surfaces. Our products are certified and tested according to the latest European norms and quality standards. You can find more information about our products and services in our online catalogues on our homepage. Do you have any questions about our products or would you like to request a quote? Please feel free to contact us. We have the right tyres for almost every application!

In our extensive range of high-quality skate wheels in various sizes and designs, you will also find swivel castors and fixed castors with housings made of galvanised sheet steel - also ideal for industrial applications. Our products are certified and tested according to the latest European norms and quality standards. You can find more information about our products and services in our online catalogues on our homepage. Do you have any questions about our products or would you like to request a quote? Please feel free to contact us. We have the right tyres for almost every application!

Heavy-duty double castor with polyurethane wheel - wheel body made of special grey cast iron with ball bearing - tread made of molded polyurethane, approx. 95° shore A - heavy welded steel construction The strongest Torwegge housing series consist of a welded steel construction for maximum dynamic stresses. The swivel castor housings are equipped with sealed axial rib ball bearing an tapered roller bearing and thus particularly sensitive against surges and beats. The housing head is screwed and secured by a heavy center bolt. The material polyurethane (PU) has a high load capacity with low abrasion. It also features high chemical resistance. These properties make polyurethane suitable for almost any application. In addition, PU offers low rolling resistance.

360 ° rotating, rubber wheels with metal fittings. Wheel size - Ø200. The plate made of 4 mm. sheet metal makes them strong and reliable under load. Load capacity - 210 kg. The anti-corrosion coating allows them to be used for a long period of time without compromising their integrity! Meet all European norms and standards - TS EN 12532 and others. Rubber ring protects against the ingress of dust and other objects into the bearing! The brake is double hardened for the plate. Exceptional design in which the brake does not rest on the bottom of the container! The wheels can be used for both metal and plastic containers. The mounting plate is standard - 110 x 140 mm, with a bolt spacing of 80 x 105 mm.