Potted plants - Import export

ABES Planter 720 / 721 is a plant pot with square / oblong basic shape and vertical side walls. Openings are countersunk in the base and closed with a perforated sheet metal cover. The container stands on four individual feet made from square tubes. Mounting Free standing element. Finish – Aluminum with powder coating in standard RAL colours or DB 703. – Containers are also available without legs and with welded frames for chain suspension upon request. ABES Planter 720 (square base) Square planter – Measurements (L x W x H in mm): 700 x 700 x 700. – Height including feet: 810 mm. – including Drainage holes. ABES Planter 721 (rectangular base) – Measurements (L x W x H in mm): 1000 x 700 x 700 – Height including feet: 810 mm – including Drainage holes

ABES Planter 710 is a plant pot with curved sides that taper at both ends. The base has apertures which may be sealed with a perforated plate cover. The container stands on rectangular tubes which serve as supports for hoisting equipment. The apertures of the tubes can be covered with removable caps. Mounting Free standing element. Finish – Stainless steel 1.4301 with powder coating in standard RAL colours or DB 703. – Other colours available on request at a surcharge. Size S / M / L / XL Width: 691 / 650 / 750 / 801 mm (widest point) Length: 1200 / 1500 / 1800 / 2000 mm Height of side wall: 390 / 390 / 490 / 490 mm Height of container, incl. base: 500 / 500 / 600 / 600 mm Volume: approx. 210 / 250 / 430 / 450 L Weight when empty: approx. 65 / 68 / 85 / 87 kg

Made of polypropylene (PP). It is mainly used in crops as it prevents the growth of weeds. It does not allow the passage of sunlight on the ground. They have designed on their surface green squares 15cm x 15cm for their easier use in greenhouses (for placement with plants, pots, etc.)

Substrate of natural dark bog peat of medium and coarse fractions with 1.0 to 2.0 g/l of fertilizer, balanced pH level of 5.5 to 6.5, and improved water absorption. For cultivation plants in pots, for replanting and growing of indoor and outdoor flowers or trees, and less salt-sensitive crops. Milled Peat Fraction:0-20 mm Raw material: sphagnum white/black-brown peat Chemical characteristics: EC 0,7-1,45 mS/cm pH 5,5-6,5 (H2O) Additives: Limestone 4,0kg/m3 Wetting agent 0,1kg/m3 NPK Multimix 1kg/m3 Radigen 0,1kg/m3

A natural high-moor peat substrate of medium and large size fractions with a fertiliser amount of 1.0 to 2.0 g/l, balanced pH level ranging, mostly from 5.5 to 6.5, and improved water absorption. It is intended for thinning and growing of plants in pots, replanting and cultivation of indoor/outdoor flowers and trees, and the growing of plants which are not very salt-sensitive. Milled Peat Fraction:0-7 mm Raw material: sphagnum white peat Chemical characteristics: EC 0,7-1,45 mS/cm pH 5,5-6,5 (H2O) Additives: Limestone 4,5kg/m3 Wetting agent 0,1kg/m3 NPK Multimix 1kg/m3

No plastic waste thanks to the Natural Pot, a plantable plant pot available in different sizes. The pots are culture resistant and already in use at many nurseries and plant nurseries. Biodegradation starts as soon as the pot comes into contact with microbes, so that some degradation processes are already visible in the pot after cultivation, but the pot remains completely dimensionally stable. The following sizes have already been tested and can be offered: 7 cm 10,5 cm 12 cm 14 cm 15 cm 17 cm 19 cm 20 cm 23 cm 27 cm 29 cm Your size is not listed? Contact us, together we will find a solution.

GC green M2571 7G3 A contains 25% natural fibers and is a biomaterial - allrounder for various injection molding applications. With GC green you get a resource-saving and home-compostable material with ground sunflower seed hulls. The fibers from sunflower seed hulls are a by-product of sunflower oil production. They are GMO-free, do not compete with food and do not require additional acreage. Often this material has already been used for our thin-walled plantable plant pots: Natural Pot. In order to provide you with an optimal color selection, we have had 10 masterbatch colors certified by TÜV Austria. We will be happy to advise you. Further advantages of GC green: 100% recyclable Reduced cycle times No sink marks Lower energy input In addition to our allrounder compounds, we naturally have many other material formulations. Just contact us, together we will find the perfect compound for your application.

GC green 3071 MI T6 contains 30% natural fibers and is a biomaterial - allrounder for various injection molding applications. With GC green you get a resource-saving and home-compostable material with ground sunflower seed hulls. The fibers from sunflower seed hulls are a by-product of sunflower oil production. They are GMO-free, do not compete with food and do not require additional acreage. Often this material has already been used for our thik-walled plantable plant pots or urns. In order to provide you with an optimal color selection, we have had 10 masterbatch colors certified by TÜV Austria. We will be happy to advise you. Further advantages of GC green: 100% recyclable Reduced cycle times No sink marks Lower energy input In addition to our allrounder compounds, we naturally have many other material formulations. Just contact us, together we will find the perfect compound for your application.

Diamonds are a… plant lover's best friend! This purple Phalaenopsis orchid adorns any interior with its sea of ​​flowers. The flowers grow on 2 or 3 branches and the purple orchid has a pot size of 9 cm. This orchid is combined with the Diamond gold decorative pot with metallic finish. This gives a beautiful and stylish effect and fits well with a chic and elegant interior. Care of the orchid Water your orchid once a week by submerging the growing pot in the water. Then let the orchid drain well before you put the houseplant back in the ornamental pot. Choose a bright spot, but not in direct sunlight, with room temperatures between 18 and 21 degrees. In addition, do not place the orchid near a heater or heater. Packaging & delivery Our plants are shipped directly from our nursery to you. They are packed in a specially developed shipping box, which ensures that plants and pots are not damaged during shipping.

What are we looking at? We're looking at this cute pot of course! Or is this pot secretly looking at you? The Face-2-Face pot is the current trend. The pot has a smooth and sleek appearance with an oval shape. The pot is made by hand, which gives each pot a unique look. This pot fits a chic and sleek interior. Combine this pot with a white, pink, yellow or purple orchid or make your interior even cooler by combining it with plants. The Face-2-Face pot is available in 6 and 9 centimeters and the colors white and grey. Our plants are shipped directly from our nursery to you. They are packed in a specially developed shipping box, which ensures that plants and pots are not damaged during shipping.

This attractive bamboo tray is made entirely by hand. The tray is perfect for using decorative storage. Due to the natural color of the reed, it can be used in many different interior styles. This wicker tray is often combined with our plant sets. This allows you to easily add extra atmosphere to your plant set. The round bamboo tray looks great on the coffee table, but also on the dining table. The tray has a diameter of 30 cm. Packaging & delivery Our plants are shipped directly from our nursery to you. They are packed in a specially developed shipping box, which ensures that plants and pots are not damaged during shipping.

We specialize in the production of high-quality lightweight, durable indoor and outdoor planters, fountains made of resin-fiberglass – A powerful combination of German quality and expert Vietnamese craftsmanship.

As the name already makes it likely, Universal Potting Soil is an all-rounder. Extremely suitable for many purposes, repotting houseplants, fi lling terrace- and bloom boxes, planting trees and shrubs and cultivating bedding plants, perennials and vegetable plants. Universal Potting Soil is of plant breeder’s quality and is composed of top quality raw materials. It contains all the necessary nutrients and trace elements. Use: horticultural substrate for nurseries, trays, seedlings and culture. Packing: Universal Potting Soil can be packed in plastic bags of 50 ltr and 80 ltr. Advantages Plant breeder’s quality Composed of top quality raw materials Light and airy structure gives excellent potting characteristics High capacity water intake Extremely suitable for many purposes Product free of pathogens and organisms harmful to plants, animals and humans Areas of application Planting trees and shrubs Perennial and indoor plants Balcony and terrace plants Flowerbed Vegetable plants

Our range of products includes packaging for flowers. These are the sleeves for cut and pot plants as well as films in rolls. Our products are not only of protective but also of aesthetic function.

Peat-free potting soil containing a mixture of coconut fiber, organic fertilizer, and vermiculite. It is used as an additional fresh potting soil needed when transplanting house plants into larger pots. It is also good to renovate the top layer of aged potting soils in large plant pots, which are difficult to transplant. The three constituents of the potting soil together mimic the physical and biochemical conditions of the natural soil. Coconut fiber has a good water retention capacity and is highly porous, allowing air circulation in the potting soil and keeping plant roots oxygenated. The organic fertilizer provides vital plant nutrients and an ideal environment for the growth of beneficial microorganisms such as bacteria and fungi. Vermiculite can absorb large amounts of water, keeping it available to the plants when needed. Its highly porous structure contributes to reducing potting soil compaction. (sold in 6 units per pack)

we are manufacturing 7 layer greenhouse film General Grades Clear – very less diffusion (below 20%) Clear Plus – Less diffusion (30-40%) Diffused -Medium diffusion (60-70%) Cool – high diffusion (80-85%) Speciality greenhouse films Rosa - UV Blocking films for rose cultivation. Chroma - UV open films for bi colour rose fruits etc. Anthura - 15 to 70 % shade (hot area / Nursery / Anthurium/ potted plants) Eclipse – Darkening / Black out films (panda films) Black & White or Black Grifa -special films for cannabis cultivation Blue - special films for vegetables, fruits and seedling nurseries

Industry floors, concrete block-systems, plant pots, bicycle paths, clinkers, tiles, flags, joint wet mortar, cement adhesive, mineral paints,… NATURAL OXIDES: yellow, red, brown, black SYNTHETIC IRON OXIDES: yellow, red, brown, black DRAGON PIGMENTS: blue, green, grey CHROME OXIDE GREEN COBALTOXIDE BLUE CARBON- or PITCH-BLACK (limited) TITANIUM DIOXIDE WHITE A pigment is a substance that has the capacity of colouring a certain carrier (cement, plaster, synthetic fibres, paint, …). Contrary to dyes, pigments are insoluble. Therefore, pigments remain under the form of small particles and will just be dispersed in the carrier and so colouring the carrier. The colouring capacity of the pigment depends on the fineness of the particles composing the pigment. In general we can say that the finer the particles are, the higher the colouring capacity of the pigment will be. A pigment is only suitable for certain applications. The pigment shouldn’t react with the carrier.

Pressed peat moss tablets Ø 32 mm is manufactured for growing seedlings of various flowery and decorative cultures under domestic conditions, on plots of land attached to a house, in the open and protected soil. Tablet features: Pressed peat moss tablets Ø 32 mm are produced from high-moor milled peat dried to 27-29% moisture and pressed into the round form for pots with a volume 0.3 liter. Content of nutritious elements (mg/100g of dry substance): Nitrogen (ammonia and nitrate) 100 - 120 mg Phosphorus 150 – 200 mg Potassium 150 – 200 Trace substances: Cu, B, Mn, Mo, Zn, Fe Electroconductivity 0.5 – 1.1 mS/cm Tablet dimensions: 0.3 L – Ø 32 mm, height 7-9 mm, weight 7-8 g.

Unique equipment for the production of AIR POT flower pots. Tree-growing machinery and equipment. Productivity 360m2/h. Raw material HDPE/PVC/PS. The project is ready for implementation WITHOUT INTERMEDIARIES! AIR POT are pots for growing plants, trees with perforation. Principle of operation: Lateral roots, sprouting along the cone-shaped "outgrowths", reach their "top" with a hole and come into contact with the air environment. Good for growing plants and transiting large plants: - shortening the cycle of growing plants. - simplification of landing management. - thickening and shortening of lateral roots. - easier passage of large plants. - Increases the yield of plants. - Ensuring good root system operation in extreme weather conditions. - reduction of excessive watering. - ecological, durable and anti-corrosion material. Contact us for more details!

The manufacturer of Spare parts for Metallurgical and Mining industries. Steel and iron casting parts, forging, CNC machining, welded steel parts. Some examples of our products: •Slag pots •Grate bars for Coke Plant, for Sintering machines •Blast furnace cooling plates, BF staves •Blast furnace charging device, large bell d5400, large-bell hopper d5400 •Moulds, metallurgical plates •Hot sinter screens •Converter vessels, helmet housing •Air and oxygen blast lances, tuyeres for blast furnaces •BOF oxygen lance tips •Bronze screw nuts, max diameter 0,88 m •Smoke exhausters rotors, rotors for gas blowers, hot blast fans •Machined products: wheel gears, ring gears, pinion shafts, crane wheels •Rollers for CCM •Сrusher wear parts •Cone-type crusher amours, max diameter 2,5 m •Gear rings, max diameter 8,2 m •Primary crusher wear plates, mill wear plates, bottom plates •Crusher hammers •Mill drums and shells, diameter 3,6 m х length 5,0 m

The manufacturer of Spare parts for Metallurgical and Mining industries. Steel and iron casting parts, forging, CNC machining, welded steel parts. Some examples of our products: •Slag pots •Grate bars for Coke Plant, for Sintering machines •Blast furnace cooling plates, BF staves •Blast furnace charging device, large bell d5400, large-bell hopper d5400 •Moulds, metallurgical plates •Hot sinter screens •Converter vessels, helmet housing •Air and oxygen blast lances, tuyeres for blast furnaces •BOF oxygen lance tips •Bronze screw nuts, max diameter 0,88 m •Smoke exhausters rotors, rotors for gas blowers, hot blast fans •Machined products: wheel gears, ring gears, pinion shafts, crane wheels •Rollers for CCM •Сrusher wear parts •Cone-type crusher amours, max diameter 2,5 m •Gear rings, max diameter 8,2 m •Primary crusher wear plates, mill wear plates, bottom plates •Crusher hammers •Mill drums and shells, diameter 3,6 m х length 5,0 m

The manufacturer of Spare parts for Metallurgical and Mining industries. Steel and iron casting parts, forging, CNC machining, welded steel parts. Some examples of our products: •Slag pots •Grate bars for Coke Plant, for Sintering machines •Blast furnace cooling plates, BF staves •Blast furnace charging device, large bell d5400, large-bell hopper d5400 •Moulds, metallurgical plates •Hot sinter screens •Converter vessels, helmet housing •Air and oxygen blast lances, tuyeres for blast furnaces •BOF oxygen lance tips •Bronze screw nuts, max diameter 0,88 m •Smoke exhausters rotors, rotors for gas blowers, hot blast fans •Machined products: wheel gears, ring gears, pinion shafts, crane wheels •Rollers for CCM •Сrusher wear parts •Cone-type crusher amours, max diameter 2,5 m •Gear rings, max diameter 8,2 m •Primary crusher wear plates, mill wear plates, bottom plates •Crusher hammers •Mill drums and shells, diameter 3,6 m х length 5,0 m

The manufacturer of Spare parts for Metallurgical and Mining industries. Steel and iron casting parts, forging, CNC machining, welded steel parts. Some examples of our products: •Slag pots •Grate bars for Coke Plant, for Sintering machines •Blast furnace cooling plates, BF staves •Blast furnace charging device, large bell d5400, large-bell hopper d5400 •Moulds, metallurgical plates •Hot sinter screens •Converter vessels, helmet housing •Air and oxygen blast lances, tuyeres for blast furnaces •BOF oxygen lance tips •Bronze screw nuts, max diameter 0,88 m •Smoke exhausters rotors, rotors for gas blowers, hot blast fans •Machined products: wheel gears, ring gears, pinion shafts, crane wheels •Rollers for CCM •Сrusher wear parts •Cone-type crusher amours, max diameter 2,5 m •Gear rings, max diameter 8,2 m •Primary crusher wear plates, mill wear plates, bottom plates •Crusher hammers •Mill drums and shells, diameter 3,6 m х length 5,0 m

Casting and mechanical manufacture spare parts for Metallurgical and Mining industries some examples of our products: •Slag pots, •Grate bars for Coke Plant, for Sintering machines, •Blast furnace cooling plates, staves, •Blast furnace charging device, large bell d5400, large-bell hopper d5400, •Moulds, metallurgical plates, •Hot sinter screens, •Converter vessels, helmet housing, •Gas caissons, •Air and oxygen blast lances, tuyeres for blast furnaces, •BOF oxygen lance tips, •Bronze screw nuts, max diameter 0,88 m, •Smoke exhausters rotors, rotors for gas blowers, hot blast fans. •Machined products: wheel gears, ring gears, pinion shafts, crane wheels. •Rollers for CCM, •Сrusher wear parts, •Cone-type crusher amours, max diameter 2,5 m, •Gear rings, max diameter 8,2 m, •Primary crusher wear plates, mill wear plates, bottom plates, •Mill drums and shells, diameter 3,6 m х length 5,0 m, Please contact: oleksandr.hnezdilov@arcelormittal.com

The manufacturer of Spare parts for Metallurgical and Mining industries. Steel and iron casting parts, forging, CNC machining, welded steel parts. Some examples of our products: •Slag pots •Grate bars for Coke Plant, for Sintering machines •Blast furnace cooling plates, BF staves •Blast furnace charging device, large bell d5400, large-bell hopper d5400 •Moulds, metallurgical plates •Hot sinter screens •Converter vessels, helmet housing •Air and oxygen blast lances, tuyeres for blast furnaces •BOF oxygen lance tips •Bronze screw nuts, max diameter 0,88 m •Smoke exhausters rotors, rotors for gas blowers, hot blast fans •Machined products: wheel gears, ring gears, pinion shafts, crane wheels •Rollers for CCM •Сrusher wear parts •Cone-type crusher amours, max diameter 2,5 m •Gear rings, max diameter 8,2 m •Primary crusher wear plates, mill wear plates, bottom plates •Crusher hammers •Mill drums and shells, diameter 3,6 m х length 5,0 m

Stabilized bonsai We create a wide range of indoor stabilized bonsai trees through patient and constant processing reproducing f edelmente the tree of origin in a small vase. In fact the word bonsai means "planted in a pot"and these miniature natural landscapes give longevity, wisdom and harmony to the maintenance-free environment . All stabilized bonsai are handcrafted and ready to be placed in your environment for wish a prosperous and long life of happiness. The height of the bonsai is always referred to the total height from the ground. The spherical white or dark green vases represented in the photo are in PVC and included in the price. The surface finish of the spherical vase is covered with our stabilized moss.

Foliar fertilizer with macro and micro-nutrients necessary for a correct and balanced vegetable nutrition. Contains 2% amino acids and organic matter which allow optimal development and flowering crops

The extra fine fertilised substrate with adjusted pH is ideal for trays and very small pots. The formula suits ornamental plants and vegetables alike, for all seedlings in trays. Depending on the growing technology and plants the substrate may be ordered of very little decomposed white peat or a bit more de-composed brown peat. All plants with average nutrient need may be grown in the substrate because the fertilisation level is medium. The substrate includes starter fertiliser with trace elements. All our professional substrates have wetting agent, this facilitates the initial wetting and also the movement of water and nutrients during the whole vegetation period. In order to guarantee maximum outcome and density, please water the peat before use during the opening of the bag, this enhances the process of decompression. The product is available in compressed small bales and also big bales. Palletised ready products are shipped in sea containers or trucks.

This is a multipurpose potting and germination mix for home use. The mix suits the needs of most loved homeplants in small pots and trays, it can be used for repotting in bigger pots and containers as well. The substrate is also suitable for soil improvement in the garden and as a growbag for vegetables outside or in the greenhouse. For flowers, including: chrysanthemums, pelargoniums, viola, primula, antirrhinum, surfinia, petunia, begonia, red hydrangea, calanchoe. Green plants. Herbs: basil, oregano, thyme etc. Vegetables: cucumber, tomato, capsicum, etc. This substrate should not be used for acidophilic plants. The substrate includes neutralised natural peat, wetting agent and starter fertiliser with trace elements. After 3-4 weeks from the start of use additional fertilisation should begin.Completed with regular irrigation and enough sunlight your plants will thrive in the Potting Mix. Mikskaar Potting mix makes your plants grow better!