Measurement instruments - Import export

Lightning fast opening and closing with Zipper E-Chain® und E-Tubes - Zipper E-Chain® satisfy by their practicability and performance. The "zip fastening" function shortens the installation time. The small pitch, the rugged elastic zipper band and the heavy duty links amaze in high accelerations. The Zipper series is one of the most popular igus® E-Chain® series in the sophisticated industrial sectors. Other information Series 047 Inner height hi: 9 mm Inner widths Bi: 10 - 16 mm bending radii R: 18 - 38 mm Pitch: 13 mm E-Chain®, rip-open along the outer radius Series 07 Inner height hi: 10,3 mm Inner widths Bi: 6 - 64 mm bending radii R: 18 - 48 mm Pitch: 20 mm E-Chain®, rip-open along the outer radius Series 09 Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 28 - 48 mm Pitch: 20 mm E-Chain®, rip-open along the outer radius Series 15 Inner height hi: 17 mm Inner widths Bi: 15 - 100 mm bending radii R: 38 - 180 mm Pitch: 30,5 mm E-Chain®, rip-open along the outer radius Series 17 Inner height hi: 32 mm Inner widths Bi: 15 - 100 mm bending radii R: 63 - 125 mm Pitch: 30,5 mm E-Chain®, rip-open along the outer radius Series R07 Inner height hi: 10,3 mm Inner widths Bi: 10 - 50 mm bending radii R: 38 - 48 mm Pitch: 20 mm E-Tube, rip-open along the outer radius Series R09 Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 48 - 100 mm Pitch: 20 mm E-Tube, rip-open along the outer radius Series R15 Inner height hi: 17 mm Inner widths Bi: 25 - 80 mm bending radii R: 63 - 180 mm Pitch: 30,5 mm E-Tube, rip-open along the outer radius Series R17 Inner height hi: 32 mm Inner widths Bi: 15 - 63 mm bending radii R: 63 - 125 mm Pitch: 30,5 mm E-Tube, rip-open along the outer radius Clean room Class 1 (ISO class 3) for Series 15, tested by the Dryden Engineering Company, California. iF-Design-Award for Zipper-Design UL94-V0 classification on request 58 dB(A) determined at the igus® laboratory, v = 1.0 m/s unsupported, Series 09.50.028.0 Lightning fast opening and closing with Zipper E-Chain® und E-Tubes - Zipper E-Chain® satisfy by their practicability and performance. The "zip fastening" function shortens the installation time. The small pitch, the rugged elastic zipper band and the heavy duty links amaze in high accelerations. The Zipper series is one of the most popular igus® E-Chain® series in the sophisticated industrial sectors. Series 047 Inner height hi: 9 mm Inner widths Bi: 10 - 16 mm bending radii R: 18 - 38 mm Pitch: 13 mm E-Chain®, rip-open along the outer radius Series 07 Inner height hi: 10,3 mm Inner widths Bi: 6 - 64 mm bending radii R: 18 - 48 mm Pitch: 20 mm E-Chain®, rip-open along the outer radius Series 09 Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 28 - 48 mm Pitch: 20 mm E-Chain®, rip-open along the outer radius Series 15 Inner height hi: 17 mm Inner widths Bi: 15 - 100 mm bending radii R: 38 - 180 mm Pitch: 30,5 mm E-Chain®, rip-open along the outer radius Series 17 Inner height hi: 32 mm Inner widths Bi: 15 - 100 mm bending radii R: 63 - 125 mm Pitch: 30,5 mm E-Chain®, rip-open along the outer radius Series R07 Inner height hi: 10,3 mm Inner widths Bi: 10 - 50 mm bending radii R: 38 - 48 mm Pitch: 20 mm E-Tube, rip-open along the outer radius Series R09 Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 48 - 100 mm Pitch: 20 mm E-Tube, rip-open along the outer radius Series R15 Inner height hi: 17 mm Inner widths Bi: 25 - 80 mm bending radii R: 63 - 180 mm Pitch: 30,5 mm E-Tube, rip-open along the outer radius Series R17 Inner height hi: 32 mm Inner widths Bi: 15 - 63 mm bending radii R: 63 - 125 mm Pitch: 30,5 mm E-Tube, rip-open along the outer radius E-Chain® selection aids You can find the right E-Chain® quickly by entering concrete parameters and with the aid of a comparison table. Selection aids Installation instructions Joining and separating of the Zipper E-Chain®. Assembly Instructions Application examples Applications in various industrial sectors and in the igus® test laboratory. Zipper Zipper E-Chain® Short installation time: Lightning fast opening and closing of lids with zipper Zipper lid can be separated and joined in any chain link Small pitch for low-noise, silent operation High accelerations: 100 m/s² and more Interior separation possible Zipper E-Tube resistant against chips and dirt Closed E-Tube with zip-open system Protection against dirt and chips Lightning fast opening of the lid in a band Modular design - simple lengthening and shortening Small division for low-noise, silent operation, high accelerations Typical industrial sectors and applications Automatic insertion machines Semiconductor devices Linear motors, handling systems Any kind of technical equipment Measuring instruments Machine tools (Zipper E-tube) Clean room Class 1 (ISO class 3) for Series 15, tested by the Dryden Engineering Company, California. iF-Design-Award for Zipper-Design UL94-V0 classification on request 58 dB(A) determined at the igus® laboratory, v = 1.0 m/s unsupported, Series 09.50.028.0

The line laser is a measuring device for aligning drive pulleys laterally, horizontally and vertically using a laser beam, preventing heavy wear to the edges of the belt. Laser beam range approx. 5 to 10 m Laser class 2 (EN 6082511997) Wavelength 630–680 mm Power < 1 mW Power supply 2 x 1.5 V (LR44) Note Never look directly into the laser beam and do not point it at other people, animals or strongly reflective surfaces. The device and the target points contain highpowered magnets. Individuals with pacemakers should not use the device due to safety reasons. Keep a safe distance away from electronic devices and wristwatches in order to prevent interference. The device must not be used in potentially explosive areas.

The particle image velocimetry (PIV) is an optical noninvasive working flow velocity measurement method. The flow field is made visible by introducing into the fluid small buoyancy neutral particles – the so called tracers. The particle flow then is illuminated with the aid of a light sheet and recorded at two defined different times within a small time interval with a digital camera. Because the particle move within this time interval with the flow, one can calculate the particles velocity by knowing its path between the two moments of illumination. The result is a velocity vector field of the flow. Here, we assume that the particles are small and follow the flow without any slip. Compared to local methods like LaserDopplerVelocimetry (LDV) with the ParticleImageVelocimetry one can reconstruct a whole flow region An extension of ParticleImageVelocimetry is the combination of PIV with thermometry (PIV/T).

A further area of activity of Suvis is the development and application of modern numerical methods for the calculation (prediction) of flows using CFD in industry, science etc. Our employees are especially trained in view of technical applications of numerical flow simulations. Within the recent years we conducted several projects in the area of multiphase flows. We dealt with applications in the optimisation of processes in chemical engineering, the transport of particles, gas cleaning and particle separation from gases and liquids, and the calculation and optimisation of cyclone separators. We apply powerful commercial software tools like grid generators in order to generate numerical grids using CADdata in a short time for even complex applications. Also, for flow calculations and the evaluation of 3D flow fields we apply powerful software solutions. Furthermore, for certain individual problems we apply codes we have developed our selves.

For the generation and production of a spray the knowledge of information like the desired droplet size and its distribution is of fundamental importance. In order to characterise a spray correctly, one has to know the droplet size distribution of the droplets, which were generated out of a given liquid. In many applications it is desired to produce very small droplets. For the design and lay out of inhalers for example, it is necessary to achieve droplet sizes not larger than approximately 10 μm to be absorbed by the lungs. When one designs an atomisation nozzle in view of the desired droplet size distribution, one has to make sure via measurements, that the nozzle is really able the produce the expected droplet size distribution within an acceptable uncertainty range. Besides the droplet size distribution, the droplet velocity is an important parameter since it is a measure of the droplet momentum.

Rentaload also offers a number of instrumentation and measurement accessories for hire. They complete the data collected through the software. Thermal camera to analyse the various hot spots in IT rooms; Anemometer to analyse air speed; Analysers to provide network information; Temperature sensors to analyse computer room temperature; Humidity sensors to analyse room humidity; etc These accessories can be rented independently or in addition to Rentalab and EkkoSense software, depending on your needs.

You have carried out experimental investigations and are now faced with the challenge of evaluating the quantities of measurement data? We support you in a fast and professional analysis. We offer you: Data management and archiving; Data validation / plausibility checks; Evaluation; Data Analytics; Reporting. Depending on the scope and nature of your test project, we can do this at the end of the test or daily. For repetitive test tasks, we also offer automated solutions. Our team consists of experienced experts who are familiar with a wide range of analytical methods. We'll help you get accurate results and gain detailed insights into your metrics to help you make better decisions. Use our services and save time, money, and resources. We take care of your measurement data so you can focus on what matters most - using the results of your experimental investigations to drive innovation.

For customers who prefer an individual software solution, we offer various interfaces for the integration of HGL measuring devices. These range from low-level network APIs, Windows® DLLs, LabVIEW™ toolkits, and iDDS support to single-instrument applications (apps) for simple measurement tasks. This flexibility allows the user to choose the best solution for each specific use case. Contact us for more information.

The Hawk user interface gives you full control over your measurement. The interface of the Hawk GUI offers the possibility of a simple and clear configuration of all measurement channels, as well as the control of data acquisition during the actual measurement. It also provides an overview of the organization of all measurement PCs and amplifiers in the network. •,Interface for configuring all connected measuring devices. •,Configuration of various limit values to monitor the measurement. •,Seamless recording of your measurement •,Define individual time ranges (manoeuvres) to make them easier to identify in the downstream analysis. •,Configuration of additional, external amplifier hardware can be integrated. •,No license fees for using the software. •,MS Windows compatible

Real-time monitoring of the measurement The HawkEye software offers various forms of representation for monitoring and controlling the ongoing measurement. Any number of pages can be created in the software with different forms of presentation of the measurement data. By supporting a server-client architecture, monitoring is scalable and can be distributed across any number of PCs. •,Real-time phase analysis •,Speed signals are calculated and displayed in real time. •,Different forms of representation for the measurement signals (time domain, FFT, Bode diagram, orbit, waterfall, machine order monitoring) •,Real-time monitoring and visual representation of implemented limit values. •,Visual and acoustic signal when limit values are exceeded. •,The screen layout can be flexibly adapted to the respective monitoring requirements and user needs. •,No license fees for using the software. •,MS Windows compatible

A fully equipped computer that can be used to record data from connected Dragonfly amplifiers. Depending on the number of connected devices and CPU power, data can also be processed for real-time monitoring and forwarded to a network-connected PC or laptop. •,Different CPU versions (Core i3, i5 or i7) are available. •,Internal SSD stores data from connected Dragonfly amplifiers •,12V power supply (also possible via Dragonfly battery) •,Ideal for systems that record data autonomously over a longer period.

With the classic network switch in Dragonfly case format, Dragonfly amplifiers can be connected bundled to a PC or to a larger network. In combination with a Dragonfly PoE (Power over Ethernet) module, this switch can be used to power Dragonfly amplifiers. •,10x 1GB/s Ethernet ports (8 ports with PoE support) •,Bundle the data streams from multiple Dragonfly amplifiers to forward them to a PC or laptop. •,Front LEDs to indicate connection and power supply via PoE.

With the Dragonfly PoE (Power over Ethernet) module, amplifiers connected via a Dragonfly network switch can be powered via the network cable. •,Maximum output power of 150W to power up to 8 Dragonfly or 3 Hummingbird32 amplifiers. •,Less cabling required, as the power supply is ensured via the network cable.

The Dragonfly battery is designed to enable measurements in areas where power is not available from the local power grid. •,Capacity of 100Wh (power supply of a typical Dragonfly amplifier for up to 10h runtime) •,One battery module can also power several Dragonfly amplifiers (with correspondingly shortened runtime) •,Several modules can be combined to extend battery life. •,Can be used as a UPS (Uninterruptible Power Supply).

HGL offers tailor-made PC solutions that have been specially developed to form a holistic measurement system in combination with HGL amplifiers. The PCs offer sufficient power reserves and storage capacity to operate several measuring devices in parallel on one computer and are compact in design. The compatibility with the existing measurement hardware was tested in numerous test series. Different form factors offer different ways to accommodate the computer hardware. In the 19" format, installation in measuring cabinets is no problem. Other form factors offer the option of mounting the PC directly to the back of a monitor. Network switches integrated into the PC hardware provide additional flexibility and clarity when setting up and operating complex measurement systems.

Timer for complex system architectures With the Synch Box, even complex measurement systems can be synchronized with external time sources. The Synch Box provides a time signal via LVDS, which connects all connected amplifiers and guarantees a sample-accurate synchronization of the data. It can also be synchronized with other timers (IRIG, GPS, ...) via external inputs.

Scalable amplifier with up to 32 analog input channels, in 19" format for mobile use. The ideal solution when many measuring channels are required in a stressful environment. •,32 analog outputs after the integrated amplifier (other options available) •,2 freely configurable digital outputs (other options available) •,Up to 100kHz bandwidth synchronously sampled across all channels (higher bandwidths available) •,16/24 bit resolution with 110+dB snr •,applicable at temperatures between -20°C and 85°C •,Robust internal wiring, insensitive to vibration or shock •,Freely scalable from an amplifier with 32 channels to multiple devices with any number of channels •,2x Ethernet interfaces, connection for external power supply (6V – 36V), LVDS connection for synchronization of several Dragonfly amplifiers (IRIG and GPS also optionally available) •,Various options for connection design (depending on signal conditioning) •,Integration of other devices from the Dragonfly or Eagle series

Scalable amplifier for mobile or stationary use This compact amplifier is the ideal basis for the construction of a more complex measuring system for changing requirements. •,8 analog input channels (from +/-1uV to +/- 1000V - depending on selected signal conditioning) •,Up to 100kHz bandwidth synchronously sampled across all channels (higher bandwidths available on request) •,16/24bit resolution with 110+dB signal-to-noise ratio •,Compact dimensions (70 x 100 x 150 mm) •,Freely scalable! From an amplifier with 8 channels to multiple devices with any number of channels (e.g. 32 devices with a total of 256 channels) •,2x Ethernet interfaces, connection for external 12V power supply, LVDS connection for synchronization of several Dragonfly amplifiers (IRIG and GPS optionally available) •,Various options for connection design (depending on signal conditioning) •,Integration of further devices of the Dragonfly series to expand the range of applications

Tablet for mobile use Eight analog inputs with up to 100kHz bandwidth. Various options available for signal conditioning and power supply of connected sensors. •,8 analog input channels •,Up to 100kHz bandwidth synchronously sampled across all channels •,16/24 bit resolution with 110+dB signal-to-noise ratio •,4h battery life •,Internal SSD with up to 256GB storage capacity (over 12h data recording) •,Compact dimensions (270x230x38mm) and low weight (2.5kg) •,Built-in 10" touchscreen for easy configuration and display of measurement and analysis results •,2xUSB port, 1x Ethernet interfaces, connection for external 12V power supply •,Various Signal Conditioning Options (in development)

The ultra-compact solution for mobile data collection. Five analog input channels with up to 80kHz bandwidth. Up to 12 hours of runtime on a single charge. •,2 to 5 analog input channels •,Up to 80kHz bandwidth synchronously sampled across all channels •,16bit resolution with 90+dB signal-to-noise ratio •,12h battery life (AA batteries can be charged via USB or easily replaced) •,Slot for SD cards with up to 128GB storage capacity (over 19h data recording) •,Compact dimensions (130x75x30mm) and light weight (300g) •,Integrated 4.3" touchscreen for easy configuration and display of measurement results •,USB port •,Integrated sensors (3-axis vibration transducer, 3-axis gyroscope, temperature sensor) •,Integrated Conditioning for IEPE Sensors (available from 2024)

The ideal introduction to the world of vibration measurement. With four analog input channels, the Mosquito offers the ability to detect a triaxial vibration sensor and a speed signal. Alternatively, a modal hammer could also be operated for a measurement with subsequent modal analysis. •,4 analog input channels (from +/-10uV to +/- 100V) •,1 digital input channel (0-5V CMOS) •,1 analog output with signal generator (DC, 0-100kHz sine, sweep) •,Up to 100kHz bandwidth synchronously sampled across all channels •,16/24 bit resolution with 110+dB signal-to-noise ratio •,Compact dimensions (40 x 90 x 170 mm) •,Freely scalable! From one device with 4 analog channels to multiple devices with any number of channels •,1x Ethernet interfaces, connection for external 12V power supply, LVDS port for synchronization of multiple devices, USB port, IRIG input

ErTeMes is the official distributor of HGL Dynamics products in German-speaking countries and neighbouring countries. We support you in all areas with products and services from HGL Dynamics. HGL Dynamics offers dynamic solutions for a world of testing. From ultra-portable to rack-mounted data acquisition systems, targeted, easy-to-use monitoring and analysis software, and powerful data management systems with low cost of ownership, HGL Dynamics offers a 100% integrated solution for your measurement needs.

Learn how to efficiently manage and monitor your measuring and testing equipment. In this training course, you will learn the basics of measuring and test equipment management, the requirements for calibration and documentation. The training is aimed at all those who are responsible for or interested in measuring and testing equipment. Topics of the training course: Measuring and testing equipment management as a pillar of quality assurance; Measuring and test equipment management as part of the quality management system – test equipment officer; Suitability of devices and sensors as measuring and testing equipment; Traceability and calibration; Documentation and employee training; Monitoring and maintenance of the measuring equipment database.

In this training course, you will learn about different measurement methods that you can use for your measurement tasks. You will learn how to select and apply the appropriate measurement method. You will get an overview of the advantages and disadvantages of different measurement methods, such as optical, acoustic, or electrical methods. The training is aimed at anyone involved in measurements, e.g. engineers, technicians, quality managers or scientists. The training lasts one day and covers the following topics: Measuring principles and application examples; Optical, electrical, thermal, mechanical, ... measurement; From measurands to measurement data; Structuring the test task; Documentation.

Learn how to calculate and interpret the measurement uncertainty of your measurement results. In this training, you will learn the basics of measurement uncertainty analysis, how to apply the GUM method, how to create measurement uncertainty budgets, and what makes ASME PTC19.1 different from GUM. You will learn how to determine measurement uncertainty budgets and how to use them to efficiently optimize the measurement uncertainty of measurement setups. In the training, we focus on: Mathematical Fundamentals; Definitions and terms; Application of the GUM method; Creation of measurement uncertainty budgets; Calculation of measurement uncertainty; Analysis and critical appraisal. You can design the training according to your wishes! Holding a workshop in which you actively contribute your problems has also proven to be a good idea. We are happy to respond to your individual questions and concerns.

This training provides an in-depth introduction to the fundamentals of the two closely related areas aerodynamics and fluid dynamics. We teach the basics and advanced knowledge on the following topics: Fluid mechanics; Aerodynamics; Thermodynamics; Gas dynamics; Aerothermodynamics and similarity relationships; (Thermal) turbomachinery; Flow measurement. Together, we will create an individual training plan tailored to your needs. Our experienced trainers impart the knowledge in an interactive and hands-on manner and are available to participants for questions and discussions. By the end of the training, participants will have a solid understanding of the fundamentals of aerodynamics and fluid mechanics and will be able to apply this knowledge in their own projects. The "Fundamentals (Aero, Fluid)" training is a valuable opportunity for professionals and engineers in the metrology industry to expand their knowledge in these important areas and strengthen their professional profile.

We design this training according to your wishes: For newcomers, we offer basic seminars on dynamic data acquisition. It doesn't matter whether you already have a measuring system or want to procure one first. We explain the basics of the most common sensors used in dynamic measurement technology, explain the general functionality of dynamic measuring systems and show, using the example of HGL hardware and software, how a dynamic measurement task can be prepared, carried out and evaluated. If you already have measurement technology from HGL, we offer you further courses to further deepen and optimize the handling of hardware and software. Here we focus entirely on your needs. We can provide an in-depth overview of the various hardware or software components or concentrate on individual aspects and deepen them.

In these training courses, we teach the basics of the various measurement techniques, the selection and use of suitable measuring instruments as well as the evaluation of measurement data. The following topics are taught in concrete terms: Fundamentals and concepts of measurement technology; measurands and units; Traceability; Technologies; Signal conversion and digitalization; Selection and use of suitable measuring instruments. In addition to the general overview training, we also offer specific training courses on measurement technology for the following measurands: Temperature; Pressure; Flow (volume and mass flow); Force and elongation; Distance and velocity; Oscillation. By arrangement, you can design the training according to your wishes! We are happy to respond to your individual questions and concerns. Since we regularly expand our training portfolio, please contact us if the metric you are looking for is not listed.

A qualified Electrical Engineering Specialist has a profound education as well as specialized knowledge and qualifications in the field of electrical engineering. He ensures that electrical systems and equipment are properly installed, maintained, and operated. He is also the point of contact for all safety-relevant standards and regulations in electrotechnical matters. ErTeMes will be happy to support you and take on tasks of the qualified Electrical Engineering Specialist in your company, e.g.: Testing and (re)establishing the proper and standard-compliant condition of your electrical machines, systems, and equipment; Troubleshooting when things get stuck; Documentation according to current standards; Training and instruction of your employees; Coordination of work processes.