Steel- special - Import export

R-clips are used for securing bolts and axles. They are easy to install and can be reused. The ends have no sharp edges. Double coil R-clips have a flatter spring characteristics and are easier to install. The double coil allows a tether cable to be attached to prevent loss. Drawing reference: Form E: with single coil. Form D: with double coil (coil direction can differ from the drawing).

Steel, bright. Stainless steel A2, bright. Stainless steel A4, bright.

On request: Other slot widths. Drawing reference: machined faces: +0.2 mm/ +0.5 mm unmachined faces: ±2 mm

The pressed in plastic inserts offer optimal damage protection for sensitive workpiece faces.

The flat gooseneck allows lower steps on the workpiece to be machined or clamped. When using spherical washers 07420 use Form G.

Steel painted. Aluminium bright. Note: When using spherical washers use the wide series 07420 Form G.

For suitable supports and adjustable rest pads, see 02130 and 02150.

The lateral spring plunger must be pressed into the hole to at least depth L3. These plungers are for positioning and holding small parts in fixtures. If mechanical machining of the workpiece is to be carried out, other clamps may be necessary. When the fixture is not in use it should be ensured that plastic springs are not under stress. Spring force refers to a mean value.

These eccentric bushes can be used as e.g. stops or tolerance compensators. 1) DIN 332-1 centre bore, Form A 2) Basic form with centring 3) With scale groove for visual stop 4) Through hole 5) Tapped hole Advantages: Easy handling Grub screw clamping Minimal installation space Arbitrary mounting position Customised application Versatile use

Eccentric bushes enable lateral spring plungers to be precisely positioned with regard to the workpiece.

Tapped cylindrical pins are chiefly used in blind holes. The milled flat prevents air compression in blind holes. The tapping makes it possible to use the extractor 03328.

The nominal diameter of the pin is the same as the receiving hole diameter. The recommended hole tolerance is ISO H12. Due to the chamfered end, the pins can be inserted easily into the hole with a hammer or using automatic placement. After insertion, the plus tolerance of the pins results in a vibration-proof seating. The pins can be easily removed using a mandrel and reused several times. The pins can transmit high shear forces and are resistant to shocks and impacts due to their spring properties. The values specified for the shear force only apply to spring steel.

Hardened and ground, precision grade 1, paired tolerance IT 5, nominal dimensional tolerance DIN ISO 2768-mK On request: Several matched pairs.

Grid spacing 50 ±0.02 mm. Tombstones with grid holes are used on horizontal machining centres. The alphanumerically labelled grid holes guarantee a defined assignment of clamping elements by repeat setups. The tombstones conform to machine tables for machine tools acc. to DIN 55201 and JIS 6337-1980. Please order locating pins for positioning subplates on machine tables acc. to DIN 55201 separately. Please order protection plugs to plug unused grid holes separately. Ring bolts for hoisting are supplied. Other dimensions available on request. Drawing reference: 1) grid hole 2) hole for DIN 912 cap screw (D3/D4)

Grid hole pitch 25 ±0.01 mm or 50 ±0.01 mm. Grid hole plugs and ring bolts for lifting are supplied. These subplates conform to subplates for machine tools according to DIN 55201 and JIS 6337-1980. The subplates are also available without grid holes. See plates without a value for “A” (xxx/-). Other dimensions on request.

GJL 250 annealed or EN AW-7075. Drawing reference: machined faces: ±0.25 mm length tolerance: ≤200 mm: +3/+10 >200 mm ≤590 mm: +8/+15 ≥600 mm: +20/+50

Grid spacing 50 ±0.02 mm. Tombstones with grid holes are used on horizontal machining centres. The alphanumerically labelled grid holes guarantee a defined assignment of clamping elements by repeat setups. The tombstones conform to machine tables for machine tools acc. to DIN 55201 and JIS 6337-1980. Please order locating pins for positioning subplates on machine tables acc. to DIN 55201 separately. Please order protection plugs to plug unused grid holes separately. Ring bolts for hoisting are supplied. Other dimensions available on request. Drawing reference: 1) grid hole 2) hole for DIN 912 cap screw (D3/D4)

Reference surfaces precision machined Note: Ring bolts for lifting are supplied. A cover prevents the cavities filling with swarf. Drawing reference: machined faces: +0.2 mm/ +0.5 mm unmachined faces: ±2 mm

The dimensions of the dowel pin comply with DIN 6325. Advantages: Ideal for fixture construction Dimensionally stable even at high temperatures Electrically insulating

20 standard types of packaging Euro pallet or universal pallet Coil eye up and coil eye to the side Possibility of packing without a pallet in special transport (tray box/mould) Metallic or plastic packing tape Paper or stretch film Choose the right packaging for various options – different unloading transport and storage types

Marcegaglia’s wide range of steel strips (P&O, CR, HDG) is engineered to match both standard and specialty requirements of target industry sectors. Thanks to its production and logistics features, Marcegaglia Baltics can create unique synergies for customers, integrating their supply chain and industrial processes creating purchasing efficiency, cost competitiveness (price optimization) and the development of more performing grades or products while guaranteeing the supply of existing codes.

Steel metal plates, or cut-to-length sheets represent the common used steel material for several application sectors: construction equipment, street furniture, shelving systems, household appliances, engineering and automotive. Thanks to its unique fabrication network and quality system, Marcegaglia Baltics range of carbon steel sheets is fully compliant to these markets’ requirements in terms of grades, dimensions and mechanical properties.

Steel metal plates, or cut-to-length sheets represent the commonly used steel material for several application sectors: construction equipment, street furniture, shelving systems, household appliances, engineering and automotive. Thanks to its unique fabrication network and quality system, Marcegaglia Baltics range of carbon steel sheets is fully compliant to these markets’ requirements in terms of grades, dimensions and mechanical properties.

Marcegaglia’s wide range of steel strips (HR, P&O) is engineered to match both standard and specialty requirements of target industry sectors. Thanks to its production and logistics features, Marcegaglia Baltics can create unique synergies for customers, integrating their supply chain and industrial processes creating purchasing efficiency, cost competitiveness (price optimization) and the development of more performing grades or products while guaranteeing the supply of existing codes.

Possibility of packaging on pallets or timber lumps with or without sticks tied to the pack. Packaging with waterproof, anti-corrosion combination paper/film or without. Metallic or plastic packing tape. Packing cardboard corners are used to ensure the preservation of the sheet edges of a delicate material. Choose the right packaging for various options – different unloading transport and storage types.

Stainless steel tubes 1.4301 304L 1.4404 316L 1.4571 316TI, 321, 1.4541 Stainless steel round bars 1.4301 1.4404 1.4571 1.4541 1.4021 1.4006 1.4104 Welded and seamless stainless steel tubes 904L 1.4539 UB6 - Full stainless steel round bars UB6 904L 1.4539 Refractory tubes and round bars 309 1.4828 1.4833 310 310S 1.4841 1.4845- Duplex tubes UNS S31803 1.4462 Super duplex tubes UNS S32750 S32760 1.4410 1.4501 Duplex super duplex full round bars 1.4462 1.4410 1.4501 Stainless steel sheets 1.4301 304L 1.4404 316L 1.4571 316TI, 321, 1.4541 Refractory sheet 309 1.4828 1.4833 310 310S 1.4841 1.4845- Duplex sheets UNS S31803 1.4462 Super duplex sheets UNS S32750 S32760 1.4410 1.4501 Stainless steel sheets UB6 904L 1.4539 Alloy tubes 600; 601; 800; 825 Hastelloy C276 - Tubes and sheets 2.4816; 2.4851; 2.4856; 2.4360 Duplex super duplex stainless steel flanges 904L UB6 1.4539