Solenoids - Import export

Solenoid

Starter Solenoid Switch

Locking solenoids of the LLV series are characterized by high forces, compact design and a lateral force carrying capacity of up to 4,000 N. The electromagnetic locking units were specially developed for use in protective devices. They are available in the versions currentless locking (CL; spring force keeps bolt in locking position) and currentless unlocking (CU; spring force keeps bolt open, locked when energized). Solenoid armature and locking bolt are guided separately in maintenance-free bearings. The latch bolt is made of stainless. The microswitch, which is installed directly in the latch housing, signals the respective position of the latch bolt approx. 0.5 mm to 1 mm after leaving the stroke start position or before reaching the stroke end position. The locking solenoids are manufactured and tested according to DIN VDE 0580/07.2000.

Locking solenoids of the LLV series are characterized by high forces, compact design and a lateral force carrying capacity of up to 4,000 N. The electromagnetic locking units were specially developed for use in protective devices. They are available in the versions currentless locking (CL; spring force keeps bolt in locking position) and currentless unlocking (CU; spring force keeps bolt open, locked when energized). Solenoid armature and locking bolt are guided separately in maintenance-free bearings. The latch bolt is made of stainless. The microswitch, which is installed directly in the latch housing, signals the respective position of the latch bolt approx. 0.5 mm to 1 mm after leaving the stroke start position or before reaching the stroke end position. The locking solenoids are manufactured and tested according to DIN VDE 0580/07.2000.

Locking solenoids of the LLV series are characterized by high forces, compact design and a lateral force carrying capacity of up to 4,000 N. The electromagnetic locking units were specially developed for use in protective devices. They are available in the versions currentless locking (CL; spring force keeps bolt in locking position) and currentless unlocking (CU; spring force keeps bolt open, locked when energized). Solenoid armature and locking bolt are guided separately in maintenance-free bearings. The latch bolt is made of stainless. The microswitch, which is installed directly in the latch housing, signals the respective position of the latch bolt approx. 0.5 mm to 1 mm after leaving the stroke start position or before reaching the stroke end position. The locking solenoids are manufactured and tested according to DIN VDE 0580/07.2000.

Ex-Solenoid with Ignition Protection Type „Increased Safety”, Ex “e”. The explosion-proof solenoid convince through high forces, dynamic switching and long service life. It consists of a pot magnet and an aluminium connector housing. According to EN 60079 the connector housing provides a connection for the protective conductor. The linear solenoid comply with the European ATEX guideline 2014/34/EU for devices and protection systems intended for proper use in explosive areas and can be used in temperature class T4 (up to +135°C). It is supplied with 24 V DC as standard, other voltages are available on request.

Ex-Solenoid with Ignition Protection Type „Increased Safety”, Ex “e”. The explosion-proof solenoid convince through high forces, dynamic switching and long service life. It consists of a pot magnet and an aluminium connector housing. According to EN 60079 the connector housing provides a connection for the protective conductor. The linear solenoid comply with the European ATEX guideline 2014/34/EU for devices and protection systems intended for proper use in explosive areas and can be used in temperature class T4 (up to +135°C). It is supplied with 24 V DC as standard, other voltages are available on request.

Ex-Solenoid with Ignition Protection Type „Increased Safety”, Ex “e”. The explosion-proof solenoid convince through high forces, dynamic switching and long service life. It consists of a pot magnet and an aluminium connector housing. According to EN 60079 the connector housing provides a connection for the protective conductor. The linear solenoid comply with the European ATEX guideline 2014/34/EU for devices and protection systems intended for proper use in explosive areas and can be used in temperature class T4 (up to +135°C). It is supplied with 24 V DC as standard, other voltages are available on request.

Rotary solenoid in cylindrical design with shafts on both sides and return spring. This preferred type is available in small quantities from stock. Further rotation angle, shaft types or other voltages are available on request.

Control Linear Solenoid with short stroke travels and high magnetic forces for precise switching of valves. The control solenoid is based on the force effect exerted on ferromagnetic bodies in the magnetic field. The electrical energy is converted into mechanical kinetic energy. The armature is reset by spring, weight or magnetic forces. The control solenoid is available in different versions and tested according to DIN VDE 0580/07.2000.

Reversible Linear Solenoids of the LHR series are characterized by high performance. They are delivered with a horizontal characteristic curve. The armature is led on both sides with maintenance-free precision bearings coated with Teflon. This results in a very high resistance to wear, granting consistent solenoid performance throughout a long service life.

Reversible Linear Solenoids of the LHR series are characterized by high performance. They are delivered with a horizontal characteristic curve. The armature is led on both sides with maintenance-free precision bearings coated with Teflon. This results in a very high resistance to wear, granting consistent solenoid performance throughout a long service life. The reversing solenoids are available in different versions.

High power solenoids of the LHS series are solenoids with strong holding forces. They are delivered with a horizontal characteristic curve. The armature is led on both sides with maintenance-free precision bearings. This results in a very high resistance to wear, granting consistent solenoid performance throughout a long service life. The LHS high performance solenoids are available in different versions.

Reversible Linear Solenoids of the LHR series are characterized by high performance. They are delivered with a horizontal characteristic curve. The armature is led on both sides with maintenance-free precision bearings coated with Teflon. This results in a very high resistance to wear, granting consistent solenoid performance throughout a long service life.

High power solenoids of the LHS series are solenoids with strong holding forces. They are delivered with a horizontal characteristic curve. The armature is led on both sides with maintenance-free precision bearings. This results in a very high resistance to wear, granting consistent solenoid performance throughout a long service life. The LHS high performance solenoids are available in different versions.

The LHP035 is a square linear solenoid in a robust steel housing, which can be actuated either by pushing or pulling. In general, the stroke movement is from the stroke start to the stroke end position. The electromagnet is convincing in a wide range of applications with smallest space requirements and high forces. Depending on the area of application, the LHP035 can be optimally configured. The series can be configured with different duty cycles (5, 25, 40 and 100% ED) and different stroke variants (5, 10, 15, 20 mm). The plug (= IP40), sealing ring and bellows (=IP54) provide an increased degree of protection. The reset can be carried out by means of an optional integrated spring. Special voltage variants are also available on request. Benefits at a glance: high forces with small installation space, simple mounting due to square design, short switching times, low wear, 10 million switching cycles in long-term test, wide range of configuration options

Linear solenoid in enclosed design with maintenance-free armature bearing for maximum durability. Available as combi type solenoid, also with integrated return spring. Starting with size RM040 of the modular system, the heavy duty solenoids are available in a wide range of specifications, including splash-proof models. Our preferred types are available in small quantities from stock. Other versions or other voltages are available on request.

Open frame solenoid as thrust type solenoid with conical face armature. Our preferred types are available in small quantities from stock. Other versions or other voltages are available on request.

Open frame linear solenoid as a thrust type solenoid. Our preferred types are available in small quantities from stock. Other versions or other voltages are available on request.

Bistable linear solenoid with permanent magnetic support in open frame technology. Our preferred types are available in small quantities from stock. Other versions or other voltages are available on request.

The D-frame solenoid LCL 40x50 is characterized by a compact design, low power consumption and short switching times. A long service life is promoted by the precision steel tube housing and maintenance-free armature bearings. The frame solenoid can be installed in any position, with the force preferably being applied in the axial direction only. It is fastened via threaded holes on the side or on the face. As standard, the frame linear solenoid has a chemically nickel-plated armature and a plastic-molded solenoid coil and has protection class IP 40. Versions with bellows achieve protection class IP54.

Control Linear Solenoid D51 with short stroke travels and high magnetic forces for precise switching of valves. The control solenoid is based on the force effect exerted on ferromagnetic bodies in the magnetic field. The electrical energy is converted into mechanical kinetic energy. The armature is reset by spring, weight or magnetic forces. The control solenoid is available in different versions and tested according to DIN VDE 0580/07.2000.

The Reversible Linear Solenoid LHR090 is characterized by high performance. It is delivered with a horizontal characteristic curve. The armature is led on both sides with maintenance-free precision bearings coated with Teflon. This results in a very high resistance to wear, granting consistent solenoid performance throughout a long service life. The reversing solenoid is available in different versions.

High power solenoids of the LHS series are solenoids with strong holding forces. They are delivered with a horizontal characteristic curve. The armature is led on both sides with maintenance-free precision bearings. This results in a very high resistance to wear, granting consistent solenoid performance throughout a long service life. The LHS high performance solenoids are available in different versions.

The LHP035 is a square linear solenoid in a robust steel housing, which can be actuated either by pushing or by pulling. The solenoid convinces in various applications with smallest space requirement at high forces. The LHP035 series can be configured with different duty cycles (5, 25, 40 and 100% ED) and different stroke variants (5, 10, 15, 20 mm) depending on the application. The plug (= IP40), sealing ring and bellows (=IP54) ensure an increased degree of protection. Resetting can be performed by means of an optional integrated spring. Special voltage variants of the solenoid are also available on request. Due to its square design, particularly high forces and simple mounting characterize the high-performance linear solenoid. In addition, the strong solenoid convinces with short switching times and a long service life of up to 10 million switching cycles. The configuration options of the LHP035 are versatile.

A mechanical rotary door lock in combination with powerful bi-stable solenoid, end position sensors for the closed and the locked position of the door, as well as central connectors and an emergency opener results in a highly compact unit. High-quality plastics contribute to increased mechanical stability and long product life even with high ambient temperatures

The compact solenoid lock AL convinces with a very high static holding force. The solenoid door lock integrates a high-performance linear solenoid, which has bistable design. The bistable design enables that the door will be locked only if the solenoid is energized for a short time. In order to unlock, the solenoid needs to be energized for a short time as well. The polarity needs to be reversed.

The compact solenoid lock SL convinces with a very high static holding force. The solenoid door lock integrates a high-performance linear solenoid, which has monostable design. The monostable design enables that the door can be locked every time when the solenoid is not energized. In order to unlock, the solenoid needs to be energized for a short time.

Rotary solenoids in square design with shafts on both sides and return spring. This preferred type is available in small quantities from stock. Further rotation angle, shaft types or other voltages are available on request. You will find more information in the download area.