Safety systems - Import export

Fire Suppression in Fume Cupboards. Add Layer of Protection Fume Cupboards control the risk of fume inhalation, those same contaminants that a Fume Cupboard is protecting the operator, environment, and equipment from, can also contribute to the risk of a fire. Fume Extractions Systems should ideally protect both. Fire suppression systems, can be retrofitted as an option for all types of Fume extraction systems This unit is not recommended for preparation rooms where the Fume Cupboards are used for long periods of time as this will degrade the carbon filter faster than expected.

Fire Suppression in Fume Cupboards. Add Layer of Protection Fume Cupboards control the risk of fume inhalation, those same contaminants that a Fume Cupboard is protecting the operator, environment, and equipment from, can also contribute to the risk of a fire. Fume Extractions Systems should ideally protect both. Fire suppression systems, can be retrofitted as an option for all types of Fume extraction systems This unit is not recommended for preparation rooms where the Fume Cupboards are used for long periods of time as this will degrade the carbon filter faster than expected.

This safety line system provides a means of continuous attachment for persons accessing a roof.

Good to go Safety pallet truck inspection checklists is ideal for ensuring pallet trucks are maintained in a good working order Simply attach a tag to the pallet truck handle in a position for maximum visibility and then use the checklist to carry out a pre-use pallet truck inspection. Remove the top copy of the completed pallet truck checklist and place inside the tag (a duplicate NCR copy is retained in the book for management/maintenance records). The tag will clearly advise users if a fault has been found and indicate a “Do Not Use” message, or if all checks were satisfactory then users will be advised that the pallet truck is “Good to Go”. The frequency of inspection will be dependent on findings of a risk assessment with a bare minimum of an annual inspection being required. In areas of daily use, in harsh environments or high risk of collisions then the frequency may be increased to weekly or daily checks. This system is totally flexible to meet your needs.

An average of 14 fatalities and 1200 serious injuries are as a result of a fall from a ladder every year in the United Kingdom. Good to Go Safety enables a tag to be attached to a ladder and used in conjunction with a ladder inspection checklist to ensure essential pre-use ladder inspections are carried out. Helps to reduce the risk of a faulty ladder being used resulting in a fall from height. This system eradicates the assumption that the ladder is safe to use and enforces a ladder inspection checklist to be completed prior to use providing compliance with regulations and industry best practice. A quick, easy to use ladder inspections checklist system ensures that key safety checks are carried out prior to use. Once completed the ladder inspections checklist provides a clear visual indication of the ladder’s status - clearly identifying when a ladder is ‘Good to Go’ and importantly when it is not safe to use.

The 750 kVA generator is a one-skid containerised, standalone generator unit. It is specifically designed to be used in hazardous areas (Zone 2). Watch the product video to find out more about the features of our 750 kVA generator, Data is based on 60Hz. For more information please contact us to request a data sheet. Generator shown may not be representative of equipment available at the time. Our 750 kVA generator comes as a containerised package in a standalone unit. CE ATEX compliant and certified by DNVGL to DNVGL-ST-E272 and NORSOK Z-015. Diesel Engine Control and Monitoring System - DECAM™. 3GHI Protection™ safety system, certified by DNVGL. Unit sound pressure level (SPL) are below 83 dBA @ 1m - meets NORSOK requirements. Large access doors on both sides of unit. Unit can operate in temperatures from –20° C to +35° C. Certified by DNVGL to operate without exhaust flame traps in hazardous area. Simplified electrical control system.

Many laboratory and industrial processes require a constant flow of gas to be delivered, and this is normally supplied from pressurised cylinders containing gas in liquid phase. If the level of liquid reduces fast, frosting can occur on the surface of the cylinder and flow rates can be adversely affected. Our gentle and insulated heating solutions can prevent this phenomenon and restore stability to the flow rate. This is particularly important when using calibration gases where repeatability is vital. Note that separate over-pressure safety systems should always be in place to meet health and safety requirements. We can design jackets for most cylinder sizes, with our standard “HHG” being a popular size normally available for immediate delivery. Product Specification: “K” size gas cylinder (others available to order) ATEX IECEx Certified solutions also available For more information contact LMK Thermosafe today T: +44 (0)1440 707141 E: sales@drumheating.com

Utilities personnel working on Gas Insulated Switchgear are in danger from exposure to SF6 gas leaks. Colourless and odourless, SF6 can accumulate undetected, presenting serious health and environmental risk. The EMT GasSafe Gas Leak Detection System offers a feature packed solution to monitoring real time gas leaks from electrical equipment or potential other unsafe gaseous emissions. Our gas safety system provides rapid detection, immediate response and early warning in the event of gas leaks or an unsafe working environment, ensuring personnel safety and asset protection. Ideal for traditional SF6 and new SF6 alternative gas installations. Provides an intelligent and comprehensive solution to your SF6 F-Gas leak detection requirements. Measurement of over 400 different gases and vapours from ppm to %Vol. Easily add or remove sensors and accessories as your system needs grow with up to 128 detectors on a single control panel.

AJS supply a large range of dampers differing in style which provide varying safety features in ductwork systems which are connected to heating, ventilation and air conditioning systems from fire safety to regulating the air flow. There are various different styles of damper which can be used for different styles of application dampers include butterfly, non return, fire, smoke, constant and blast gate plus many more. Dampers are available with various different safety features.

Every business has a duty to provide training to nominated Fire Wardens, to protect and help prevent loss and damage to property and persons. Arch Fire Systems deliver professional Fire Safety Training in Plymouth, Devon & Cornwall, from Land’s End, right through to Barnstaple.

JME design and manufacture digital radiography systems to meet customers specific inspection requirements. All JME (DR) Systems are built with an integrated safety system, which includes emergency stop buttons and monitored door interlocks, audible pre-warning and fail safe warning lamps. All JME (DR) systems meet all the statutory requirements of the current Ionising Radiation Regulations (IRR99). Wet film radiography has been accepted and used as a NDT technique for many years. However new X-Ray imaging techniques are now available and offer many advantages over film. As a leader in the field of advanced inspection equipment JME can offer Digital radiography (DR) to our customers. JME can provide advice on choosing and using our DR systems, radiographic techniques and safety requirements. Conduct feasibility studies and trials. Design and manufacture turn key solutions. Supply X-Ray sources. Supply assessor and image manipulation software. Provide after sales service and repair.

The Merlin CO2-X can be used independently or can work in conjunction with one of our Merlin gas safety systems. In the event where the CO2 levels rise to a dangerous level, the Merlin CO2-X Monitor will sound an audible alarm to alert the user of the danger, automatically drive ventilation fans reducing CO2 & temperature as well as shutting off any connected utilities such as gas solenoid valves. An alarm condition can also be communicated to building management systems.

Ensure that you’re protected with the highest quality fire detection and extinguishing facilities with the help of the London City Fire & Electrical Group. Our team is experienced in every facet of fire alarm system design, installation, and service. All fire detection and alarm systems must be regularly serviced in order to highlight any potential faults and to provide the preventative maintenance that keeps them reliable for the foreseeable future. Let us help you ensure you’re giving your fire safety systems the care they need. In order to make our services as accessible as possible, we offer a free quotation, as well as a price match guarantee to provide you with more value than anyone else in the industry.