Water desalination systems - Import export

Typically, the ASCO CO2 Gas Dosing System is used together with water desalination plants. The system is equipped with a CO2 pressure reducing valve, filtration unit, CO2 gas flowmeter, CO2 regulating valve, pressure gauges, safety valves and a completely prewired control cabinet. In case of maintenance the system provides a manual bypass line, which also can be monitored by the flowmeter. Herefore, changing a filter cartridge or doing any other service work on the system is quick and easy! As raw and fitting material ASCO uses mainly stainless steel. This makes the system very resistant and extends the products life cycle. easy to install very accurate 4 20 mA output signal robust stainless steel construction no auxiliary equipment like air compressor needed, only power supply is required

— For the recovery of heat from desalinated water/condensate — Increase in system efficiency of up to 2% — Reductions in fuel, cooling water and waste water costs — Fast and easy assembly, requires just a small number of connections before it can be used Highly efficient boiler systems with perfectly matched boiler house components ensure that low levels of energy consumption and emissions are achieved.

— For the cooling of blow-down water and the recovery of heat from desalinated water/condensate — Increase in system efficiency of up to 2% — Reductions in fuel, cooling water and waste water costs — Rigorous compliance with official requirements thanks to automatic operation — Fast and easy assembly, requires just a small number of connections before it can be used

Neotec UV developed open channel low-pressure, high-output ultraviolet (UV) disinfection system equipped with cleaning device operated by submersible rodless cylinder (NOL-HA Series) in 2005 and obtained Excellent Performance Certification from Korean government agency in 2009. Since then, Neotec has installed UV system at many wastewater and reclaimed waste- water treatment plants in Korea.

Introducing the Diamond Series Fresh Water Maker, a state-of-the-art reverse osmosis system designed for marine applications. This system offers a nominal production capacity ranging from 40 to 80 cubic meters per day, ideal for use with seawater at a temperature of 25°C and a salinity level of 35,000 parts per million. Housed within a durable stainless steel rack, this system is skid-mounted for easy installation and comes equipped with an integrated PLC control and starting cabinet for user-friendly operation. One of its standout features is the automatic freshwater flushing system, which serves as a safeguard for the membranes, prolonging their lifespan. Additionally, it boasts an automatic "water drop" system with a high salinity alarm, ensuring the quality of the produced water. To enhance performance monitoring, the unit is fitted with a digital flow-meter, providing precise readings of both momentary and cumulative water production.

Ball valve for desalination, offshore oil and gas industry, pulp and paper and chemical industry. Suitable for reverse osmosis, geothermal water, Sulphuric acid, Nitric acid, Saliferous fluids, hydroxides and other liquids and gases without mechanical impurities.

SW-O® unique 100% free chemical modular plant in the world. 1.- Coagulation contact: Uses a porous filter media to develop a type of bacteria that lives in the sea naturally. To attract particles from stable colloids, bacteria produce and covered so that same enzyme function as a glue. For this reason, the coagulants are not necessary to destabilize the colloids.   2.- Filter Media SW-O® filtration is faster (~ 10-15 of m / hr). A different bacteria, but also natural seawater, is set in the filter medium. This bacteria is able to permanently consume the dissolved organic material in the water. This bacterium causes the water to reach a state of "famine" or lack of oxygen. The absence of oxygen is key to maintaining corrosion at low levels. The filter backwash can now be downloaded to the sea without any treatment as this does not use chemicals.

the water systems's water output 10L/h,20L/h,40L/h,60L/h are available. Features: 1.two way online water quality sensor,RO water, deionized water, or ultrapure water respectively. 2.Cartridges replacing alarm function, based on time and water quality, show cartridges´ used and residual life. 3.Multiple alarm function: no feed water, full water, water quality´s standard exceeding, and cartridge life ending. 4.top polishing resin, ensure ultrapure water´s quality up to 18.2 MΩ.cm, with the lowest TOC level. 5.integrated design of the whole machine, small occupancy, simple appearance, easy to use and safe. Lab Type 1 ultrapure water can be widely used for Flow cytometry, pyrogen sensitive applications, cell and tissue culture, and sentitive analytical work such as HPLC,ICP-MS,GC-MS. TheType 3 RO pure water is for filling water baths and incubators,feeding glassware washing machines and autoclaves.

"Clean water with clean electricity Billions of people still have no access to clean drinking water or lack adequate sanitation. Residents of rural areas are particularly affected. If drinkable water is needed far away from any infrastructure, SolarPurification can help. The system can produce up to 200,000 litres of clean drinking water per day even from heavily polluted surface and ground water. Clean drinking water without chemicals Several treatment stages make it possible that the drinking water is not only clean but also safe. The SolarPurification filters 99.999 % of all bacteria and viruses from the existing water - and this completely without the use of chemicals. This is made possible by a combination of ultrafiltration, activated carbon filtration and UV disinfection. High-quality components, automatic operation with PLC and online monitoring characterize this compact water treatment system. Low maintenance and solar powered

"The MBS-Outdoor from SolarSpring is a compact and innovative water treatment plant.The system guarantees a reliable and safe water supply from contaminated and microbiologically contaminated water sources without the use of Chemicals. Tecnical data: Nominal flow rate: 50-200l/h Energy consumption: 40W Weight: 22kg"

The RO installation, also known as "Reverse Osmosis" or "Reverse Osmosis," is a membrane filtering process that removes particles from water, such as germs and viruses, as well as salts (ions). The resulting water is referred to as demineralized or demineralized water. As a result, demiwater (desalinated water) ensures exceptional water purity for a wide range of applications. It's used to make boiler feed water, make-up water, cooling water, and/or process water, among other things.