miko is one of the smallest compressor cooling systems currently available on the market. Although it has compact dimensions, the miko offers an extremely high power density and temperature stability of +/- 0.1 K. The mini-tower version measures just 350 x 200 x 330 mm and delivers a refrigeration capacity of up to 400 W, depending on ambient conditions, and the plug-in version delivers between 400 and 800 W with a height of just 3 or 4 RU (rack units). It features 24 V miniature compressors which are on a par with the large versions on a 230 V basis and also include a speed control unit. This power density means that miko offers an attractive and efficient alternative to Peltier coolers, including for high ambient temperatures. Both the plug-in and stand-alone units in the miko series are noise- and vibration-reduced.
Italy
Dry coolers are simple and reliable equipment. Their operating principle is based on a sensible heat exchange between air and water where: air is drawn in by fans through a finned coil, while water (or a mixture of water and glycol) flows through the tubes that make up the coil and cools when the (cooler) ambient air laps the surface of the latter. Fins are used to increase the overall heat exchange surface area so that the equipment can be as compact and efficient as possible.
Request for a quoteSpain
Portable evaporative air cooler to 6.000 m3/h for premises up to 80m2 The AXIAL COOLER 8000 portable evaporative coolers are ideal equipment for air conditioning in a totally natural way and with the minimum local electricity consumption of topo type with an area of up to 80m2. Its basic principle of operation is to suck the air from the premises with open doors or windows and pass it through some cooling panels moistened with water, once the air passes through this panel it cools and increases its humidity. AXIAL COOLER evaporative air conditioners, have up to 3 fan operating speeds and develop an air flow of 4,000 to 6,000 m3/h, their cooling capacity is suitable for premises of up to 80m2. For larger surfaces more units can be installed.
Request for a quoteNetherlands
The WWKGD40 is a compact water cooler that can easily be installed in, for example, coffee machines or a kitchen cupboard. The built-in thermostat allows you to set the desired temperature. The water cooler can be easily connected to the water supply network. It requires hardly any maintenance and always supplies refreshing cooled water.
Request for a quoteUnited Kingdom
We have all types of industrial heat exchangers, including: plate and frame shell and plate shell and tube fin/fan They’re refinery-grade, thoroughly cleaned, pressure tested and certified contaminant-free before each use. Capable of handling temperatures from -50ºC to +300ºC, they can also accept volatile gases and liquids, high pressures (up to 40 barg), hydrocarbons, sea water, effluent and brine. With a wide range of supporting ancillaries we can connect our heat exchanger units into any system design with minimum disruption. Heat exchanger hire with expert service support – every time Whether you’re facing emergency bottlenecks, turnarounds or seasonal cooling needs, our process engineers will work closely with you to find the best solution. They’ll visit your site, assess your needs, then design and size your project using their experience, simulation software and stream physical properties. We can also assess the performance of existing heat exchanger
Request for a quoteCreate one request and get multiple quotes form verified suppliers.