Equipped with CAN or CANopen interfaces and a 19″ slide-in casing, the MicroControl µLAB is particulary suitable for measuring electric, thermal and mechanic signals in engine or components testing facilities. The signal wires are connected to the module by plug-in connectors in the front plate.Voltage +/- 10 V Accuracy 0.01% (FS) Resolution 16-bit (1 µA) Sampling rate 5ms / 200 Hz Galvanically isolated fieldbus Operating temperatures -40…+85 °C Supply voltage 9…36 V DC Connection via circular plug-in connectors Fieldbus CAN Protocol CANopen / Raw CAN
Germany
Equipped with CAN or CANopen interfaces and a 19″ slide-in casing, the MicroControl µLAB is particulary suitable for measuring electric, thermal and mechanic signals in engine or components testing facilities The signal wires are connected to the module by plug-in connectors in the front plate.Current 0(4)…20 mA Accuracy 0.01% (FS) Resolution 16-bit (1 µA) Sampling rate 5ms / 200 Hz Galvanically isolated fieldbus Operating temperatures -40…+85 °C Supply voltage 9…36 V DC Connection via circular plug-in connectors Fieldbus CAN Protocol CANopen / Raw CAN
Request for a quoteGermany
The µCAN.8.pwm-SNAP unit is equipped with 8 outputs which provide pulse width modulated signals (PWM) within the range of 0% to 100% for controlling of actuators (valves etc.)PWM output Basic frequency 40 Hz … 5 kHz Mark-to-space ratio 0.0 % … 100.0 % Galvanically isolated fieldbus (option) Each output to be charged with max. 1.4 A Output drivers can be supplied separately Screw connection via plug-in connectors Fieldbus CAN Protocol CANopen / Raw CAN
Request for a quoteGermany
If companies want to decide on a future-proof bus technology, comprehensive advice will be needed in the early stages of the development process. We mostly start with a MicroControl workshop or webinar which will then be followed by support and advice in the research and development stage. If the decision has been made for CANopen classic or FD, the MicroControl experts will work in close liaison with the customer to realise hardware and software for the desired application. In a following step, a prototype will be developed and manufactured – either by the customer or MicroControl. In the conceptual stage, the required technical specifications of the customer’s application are checked continually. With more than 25 years of experience in project management in a variety of industries, we will be your reliable partner for future solutions.
Request for a quoteGermany
Varying ambient temperatures from cold winters to summer heat, resistance against environmental influence, such as shock or vibration – these are the main requirements for agricultural technology. Before these vehicles go into series production, they are thoroughly tested in extreme conditions – day and night. In tough test applications, the CAN bus technology from MicroControl ensures reliable data transfer between vehicle components and the testing facility.
Request for a quote