BICKER ELEKTRONIK GMBH - We are your partner and solution provider for industrial and medical applications

✓ Ultra wide input range 6...36VDC ✓ Selectable output voltage +12V, +19V or +24V ✓ Very compact design 132mm x 56mm x 17mm ✓ Full performance in the extended temperature range of -20°...+60°C ✓ Very high efficiency up to 98% ✓ More than 10 years capacitor lifetime ✓ Optional output voltage compensation via sense lines ✓ Optional Remote On/Off ✓ Incl. thermal pad, jumper and distance bolts ✓ Made in Germany With 98% efficiency and 300W output power the powerful open frame DC/DC converter offers an ultra-wide 6-36 V input as well as three selectable output voltages 12V / 19V / 24 V, so that almost any corresponding single-voltage motherboard or computer system can be supplied. The very compact DC converter “Made in Germany” delivers fanless full power in the extended temperature range of -20°…+60°C and up to an operating altitude of 5000m.

✓ Outdoor AC/DC UPS for extreme environments in robust aluminium housing with IP65 protection ✓ Already integrated LiFePO4 energy storage (330 Wh) ✓ Temperature range -20…+50 °C ✓ Intelligent input current regulation ✓ Regulated output voltage in battery mode ✓ Pressure compensation element to prevent condensation inside ✓ Input and output cable firmly installed ✓ IEC/EN 62040-1 certified ✓ Optionally available: mounting sets for masts AC-DC UPS with IP65 protection class for outdoor applications The UPSI-2406IP-38AC is an AC/DC UPS system with numerous digital features and a high performance. The UPSI-2406 is used with an upstream AC/DC converter and combined with an already integrated LiFePO4 energy storage. The primary use of the UPS is in bridging power failures and/or fluctuations. The application to be protected is connected to the output of the UPS. The device has IP65 protection and was specially designed for use under extreme conditions.

✓ Uninterruptible power supply (DC UPS) with integrated Li-Ion Battery ✓ Intelligent power sharing ✓ Regulated output voltage in backup mode ✓ Minimum load detection ✓ Power fail Timer-Function ✓ Relay dry contact on power fail ✓ USB & RS232 Interface ✓ Plug&Play - recognized as UPS by operating system ✓ Extended functionality by UPScom management software ✓ Shutdown & Reboot Function ✓ Fuel gauge ✓ Approved to IEC/UL/CSA 61010-1 / -2-201 ✓ 3 years warranty The DC UPS UPSI-2406DP1 with included energy storage has been designed for DIN Rail applications. The robust housing protects electronic parts against coarse pollution. The µC-controlled DC-UPS is based on the proven UPSI-technology and features numerous protective and monitoring functions as well as an integrated reboot function, which activates the auto-restart of the computer system, as soon as the input voltage returns during shutdown or later.

✓ Powerful 24 V DC USV (DIN rail version) ✓ Integrated Supercap Pack 13,5kJ ✓ Up to 500 000 cycles ✓ Intelligent input current detection ✓ Regulated output voltage in battery mode ✓ Minimum load detection ✓ Power-fail timer function ✓ Relay dry contact on power fail ✓ Reboot function ✓ Fuel gauge ✓ Shutdown via external signal ✓ Operating temperature range -20°…+70°C ✓ Extended functionality by UPScom management software ✓ 3 years warranty The compact DC UPS modules UPSI-2412DP2 in a robust DIN rail housing are ideally suited for long-term use in control cabinet applications and decentralized solutions for protecting embedded industrial PCs, controls, motor drives, sensors, measurement devices, safety technology and many more. The UPS comes with USB & RS232 interface and provides a capacity of 13.5kJ in up to 500,000 cycles. Extended functionality is available via the UPSGen2 configuration software.