Compact Guide Unit for ISO21287

Compact and economical linear guide unit for ISO 15552 cylinder Ø32 to 50. Short guide on bronze bearings, ball bushings or polymer bearings. Competitiveness of guide units for ISO 15552 cylinders This range is very competitive since it is 25% less expensive than a HGuide Classic Series 20% less expensive than a UGuide Classic Series 10% less expensive than a UGuide Light Series (comparison made on size 4 – for cylinder Ø32) Area of application of compact guide units These compact guides being available in ball bushings whereas all the Uguide units are generally available in plain bearings only, they are particularly interesting for simple applications at high speed like in packaging machines. It will also be used in tight spaces, but for short strokes (<100 mm), it may be advisable to use a compact cylinder ISO 21287 with the guides

For pneumatic cylinders ISO Ø8 and Ø10 Guide on bronze bearings or ball bushings The smallest guide unit in the range It’s the smallest unit, suitable for ISO6432 Ø8 and Ø10 pneumatic cylinders, allowing an ISO cylinder to be kept for small guided cylinder applications. It has a long Ushape to remain compact and have a guide length comparable to an Hshape. For environments requiring an anticorrosion version, the steel parts can be supplied in stainless steel (rods, coupling, screws), the body and the front plate are remaining in anodized aluminum (suffix /AC after the reference). Any special stroke is possible, with a maxi stroke of 200 mm.

Pneumatic cylinder double acting Guided by 2 rods on ball bushings or bronze bearings Elastic damping at end of stroke Magnetic piston and Tgroove for sensor Robust and precise compact cylinder with guide Long and precise guidance because even for very short strokes, guidance is ensured by 4 bronze bearings or 4 ball bushings as the shortest body is the 50 mm stroke for lower strokes, a stroke limiting ring is placed in the cylinder. This guidance avoids the problems of buttressing, regularly encountered with ultrashort guides. These pneumatic cylinders are robust and reliable, even at high speed thanks to screwed cylinder’s covers (no circlips) an hardanodized body at 35 μ a thick front plate allowing a long centering of the rods for a better resistance to torsion Guided cylinder for universal detector The 5 / 6.5 mm Tslots allow the use of the majority of brands of magnetic detectors on the market. Stroke adjustment on compact guided cylinder

Guide units for pneumatic cylinders ISO Ø20 to Ø50 For other cylinders (not standardized) Complete guide units, or subsets (bearings, guide rods, rod couplings) to realize a guide adapted to your need and integrated to your machine Materials used in stainless steel guides These guide units are made of 304L stainless steel for environments requiring anticorrosion and resistance to certain aggressive agents.. The scrapers are in thermopolyurethane FDA approved. Polymer bearings are in Iglidur J (dry using) Bronze bearings are impregnated with oil (oil compatible with food processing areas) The ball bushings can be with FDA grease (contact us) Precautions for use in the food industry Despite the materials used, these units cannot however be used in the direct food zone without precaution (in contact with or above food), since there is a retention zone at the level of the rod coupling and that particles or drops may ooze from the guide bearings.