For pneumatic cylinders ISO Ø8 and Ø10 Guide on bronze bearings or ball bushings The smallest guide unit in the range It’s the smallest unit, suitable for ISO6432 Ø8 and Ø10 pneumatic cylinders, allowing an ISO cylinder to be kept for small guided cylinder applications. It has a long Ushape to remain compact and have a guide length comparable to an Hshape. For environments requiring an anticorrosion version, the steel parts can be supplied in stainless steel (rods, coupling, screws), the body and the front plate are remaining in anodized aluminum (suffix /AC after the reference). Any special stroke is possible, with a maxi stroke of 200 mm.
France
Table for pneumatic cylinders ISO Ø16 to Ø40 Guided on ball bushings Protected by wipers seals More rigid than a H guide unit These tables maintaining the same quality of guidance and rigidity throughout the stroke. For a offcentered payload in vertical, these tables allow to be more rigid than a guide unit in H. Hydraulic shock absorber on this table A hydraulic shock absorber may be placed in opposition to the pneumatic cylinder to dampen, for example, the descent and/or limit the stroke at the output of the cylinder rod. The retracting stroke can be adjusted by the floating rod coupling. Use in harsh environment For dusty environments, additional nitrile or polyurethane scrapers can be added in front of the ball bushings. An anticorrosion version can be proposed with the rods, the coupling and the screws in stainless steel (the carriage and the plates remain in anodized aluminum). It’s possible to make these tables with plain bearings (bronze or polymer) on request.
Request for a quoteFrance
Guide units for pneumatic cylinders ISO Ø20 to Ø50 For other cylinders (not standardized) Complete guide units, or subsets (bearings, guide rods, rod couplings) to realize a guide adapted to your need and integrated to your machine Materials used in stainless steel guides These guide units are made of 304L stainless steel for environments requiring anticorrosion and resistance to certain aggressive agents.. The scrapers are in thermopolyurethane FDA approved. Polymer bearings are in Iglidur J (dry using) Bronze bearings are impregnated with oil (oil compatible with food processing areas) The ball bushings can be with FDA grease (contact us) Precautions for use in the food industry Despite the materials used, these units cannot however be used in the direct food zone without precaution (in contact with or above food), since there is a retention zone at the level of the rod coupling and that particles or drops may ooze from the guide bearings.
Request for a quoteFrance
Compact and economical linear guide unit for ISO 15552 cylinder Ø32 to 50. Short guide on bronze bearings, ball bushings or polymer bearings. Competitiveness of guide units for ISO 15552 cylinders This range is very competitive since it is 25% less expensive than a HGuide Classic Series 20% less expensive than a UGuide Classic Series 10% less expensive than a UGuide Light Series (comparison made on size 4 – for cylinder Ø32) Area of application of compact guide units These compact guides being available in ball bushings whereas all the Uguide units are generally available in plain bearings only, they are particularly interesting for simple applications at high speed like in packaging machines. It will also be used in tight spaces, but for short strokes (<100 mm), it may be advisable to use a compact cylinder ISO 21287 with the guides
Request for a quoteFrance
Very compact and economical linear guide unit for ISO 21287 cylinder Ø25 to 50 (cylinder not supplied). Access to the lateral sensor grooves of the cylinder. Short guide on bronze bearings, ball bushings or polymer bearings. Ideal for compact guided cylinder applications while retaining an ISO cylinder. 2 ranges of linear guide units for ISO 21287 cylinder Depending on the stroke and the lateral forces, 2 ranges are available to guide the rod of ISO 21287 cylinders. . 34*EC series is the most compact version, with a rigid connection of the cylinder rod directly screwed into the front plate. This model is therefore limited to cylinders with stroke up to 50 mm. . 34*EF series has a floating rod coupling between the cylinder rod and the front plate. This model can receive cylinders with a longer stroke (100 mm maximum recommended). ISO 21287 cylinder with guide unit or compact guided cylinder ? It’s more advantageous to use an ISO 21287 cylinder and a 34*EC series guide unit
Request for a quote