DAMBACH LAGERSYSTEME GMBH & CO KG

The aisle-bound MONO series has proved a favourite with customers because of its optimum use of space. Minimum approach dimensions at the end of the aisle and at the top and bottom of the travel plus no-buffers end-of-aisle protection permit full exploitation of the storage space. And then there’s the speed factor as well: good travelling speed and acceleration figures ensure efficient storage and retrieval, also during peak times. Depending on requirements, our MONO storage retrieval machines (SRMs) can be fitted with one, two or three drives. Where very high maneuverability is required, DAMBACH also makes use of an interlocking drive concept with a toothed rack. That results in throughput rates that are otherwise only seen in automated small parts warehouses. Another benefit of the toothed rack drive is the low load on the running wheels and the rails.

The rail-guided storage and retrieval machines of our MULTI series are curve-going models and can reach every storage aisle effortlessly via special rails and points—directly, quickly, and safely, and without the need for a costly mechanical traverser. So operations are not interrupted. This clever solution for changing aisles improves access times considerably in any warehouse system. When equipped with suitable load handling elements, MULTI storage and retrieval machines (SRMs) are extremely versatile. They can be supplied as single or twin mast versions for handling practically any type of load, from drinks to car bodies. DAMBACH designs and produces its own load handling attachments tailored perfectly to the respective lifting unit. For example, double-deep telescopic forks for utilizing the available space more effectively, or rotating/traverse forks with adjustable tines for handling closed pallets.

The MINI-LOAD series takes small-parts storage to previously unknown heights. Storage heights of up to 27 m can be reached without a drop in performance. Our units can work in automated small-parts warehouses handling containers or boxes equally well. The compact form of the MINI-LOAD results in especially low approach dimensions both horizontally and vertically. So DAMBACH rail-guided storage and retrieval machines (SRMs) for small parts storage make full use of the space available. A very diverse range of load-handling equipment is available to suit the goods to be stored and the performance targets. Telescopic forks are adequate for single-deep storage, but combination telescopic forks or grabs are necessary for double-deep storage or to boost the performance of transfer operations on the apron. Our MINI-LOAD SRMs can be adapted to customer requirements and loads. The integral lifting and lowering rope results in highly dynamic vertical transport.

The ultra-light COMPACT storage and retrieval machine opens up flexible options for use in existing warehouses. The consistently lightweight design reduces kinematic loads on the floor panels and conserves energy. Transverse forces in the rack are also minimal. A lower approach dimension of 0 millimeters allows the use of conventional stacker racks. No storage space is lost in the lowest rack level. Depending on the application, the COMPACT machines can be equipped with a variety of load handling attachments. High handling capacities and individual location access are achieved with single- or double-deep telescopic forks from DAMBACH. With the patented rotating and swiveling traverse fork, pallets can be picked up or set down at floor level to meet the needs of manual warehouse operation. The tilting device even makes it possible to transport pallets with closed bottoms.

The MULTIFLEX from DAMBACH sets new standards for throughput, flexibility and efficiency. It comprises three perfectly coordinated modules with seamless interfaces: the proven COMPACT SHUTTLE, the high-performance vertical conveyor LIFT and the newly developed CARRIER. In analogy to the small-part-shuttle technology, the MULTIFLEX enables multi-deep storage and highly dynamic commissioning of various types of pallets. In addition, the compact design of the DAMBACH-shuttles and vertical conveyors ensure a very high storage density. With this modular structure, the MULTIFLEX is flexibly adaptable to different challenges. The fields of application for this pallet-shuttle-system are as variable as its three configurations. It is suitable, for instance for cold storage, buffer storage, dispatch warehouses, sequence storage, commissioning warehouses or supply warehouses – But also for compact warehouses with low throughput.

DAMBACH roller conveyors consist of a stable frame with rollers bolted in place. The rollers are driven by an easily serviced tangential chain drive with tensioning unit housed in a drive enclosure. The entire drivetrain is enclosed for safety and to prevent tampering. Flanged wheels rotate with the rollers to help transport goods carefully. The frame is height-adjustable. DAMBACH chain conveyors consist of self-supporting chain strands mounted on a rigid frame. The number of strands can be varied to suit the application. Duplex chains with straight side plates guarantee careful transport of your goods on an optimised support surface. Chains are supported on low-friction slide rails and can be individually tensioned. All chain strands are driven via a common driveshaft fully enclosed for safety. The mounting frames bolted to the main frames are height-adjustable. High throughput rates Travelling speed up to 0.5 m/s and acceleration up to 0.8 m/s² Max. 1500 kg per storage position

DAMBACH lift tables are efficient transfer units for mergers, crossings or branches in flows of materials. Roller or chain conveyors can be integrated as required. The interlocking lift mechanism combined with a rigid frame protects the unit loads and ensures optimum availability. As an option, variable intermediate lift positions can be included to ensure greater flexibility. The compact dimensions and safety guards expand the range of applications. Turntable with Roller or Chain Conveyor Turntables can divide or merge flows of materials without changing the orientation of the unit loads. The highly dynamic turntable drives from DAMBACH are interlocking units and ensure precise rotational angles of up to 270° with any number of intermediate stops. For optimum occupational safety, our turntables can be fully enclosed. In addition, the innovative modular design guarantees numerous and diverse applications and ease of servicing at the same time.

The DAMBACH Vertical Conveyor lifts efficiency to the next level. The free-standing steel construction utilizes warehouse space optimally. The consistent use of poka-yoke techniques and modularcube design allows both fast installation as well as subsequent positioning in confined conditions. Almost any flow of materials can be taken care of with diverse load-handling devices and conveyor elements – two pallets lengthwise or crosswise, a corner transfer module with or without a change of orientation of the conveyed item, and much more. The DAMBACH Vertical Conveyor is one of the highest performing on the market. Each jack can be delivered with preinstallation and decentralized controls. Deepfreeze compatibility up to -28°C comes included at DAMBACH. Compact construction, small lower approach dimensions Inherently stable multiple-column design for heavy loads: up to 3,000 kg Lift speeds up to 240 m/min, lift heights up to 35 m

The transfer car is based on the innovative DAMBACH Shuttle technology, using power caps for energy storage – making bus bars unnecessary. However, if required a traditional energy supply via bus bar or cable chain is possible. The transfer car can be equipped with up to two load handling devices or with roller or chain conveyors. Good throughput rates Low height Low installation requirements With one or two load-handling units With optional transfer unit for safe transfer of mesh box pallets

High performance with the new DAMBACH conveyor modules for totes, cartons and trays. With decentralized conveying functions and standardized modules, a wide range of material flows can be mapped easily and quickly. All modules are perfectly matched and can be freely combined. Also thanks to the high level of standardization of individual assemblies. This not only increases flexibility, but also reduces spare parts inventories. The comprehensive container conveyor technology modular system consisting of roller cams, lift converters, infeed and discharge conveyors, accumulating roller conveyors, belt conveyors, lifters and leaves nothing to be desired. Our sales department supports you from the planning phase through layout design to implementation. The robust design with integrated cable ducts and sensors ensures maximum functional reliability. Motor rollers and side guides are easily accessible without time-consuming disassembly of the cover.