PETER SCHARDT GMBH

FTA Floating moving end Compensate parallel errors The igus® compensator for gliding applications with E2/000 and small E4.1 energy chains. At moving arms with strong lateral offset the floating moving end provides for a compensation and therefore for a force-free run of the energy chain in the guide trough. This extends the life time of your application. -Small, light and low priced -Compatible with PPDS basic analysis units -The basic ”floating moving end“ can be used with the following chain series: 2500, 2700, 3500, E4.28, E4.32 and E4.42 Max. travel distance:100m Max. acceleration: up zo 50m = 2 m/s 2 | 50-100m = 1 m/s 2

Industrial processes require a possibility of a flexible joint of two or mere components that move against each other, in such a way as to maintain tightness of the connection. The solution of this problem are compensator fabrics produced by Gambit in accordance with individual needs of users or installation designers. They are used as flexible joints compensating thermal deformations, side shift, and vibrations, while muffling and reducing transfer of noise across the installation. Compensators are used in power plants, gas turbines, chemical industry, petrochemical industry, paper industry and cement industry. More and more compensators are used in exhaust gas treatment and desulphurisation. Our compensators are made of materials resistant to both high temperatures, up to 1000oC, and aggressive chemical media. Working pressure of compensator fabric is -0.2 to 0.3 bar.

The IST AG LFS1505 conductivity sensor offers a typical cell constant of 0.68 cm-1 and a conductivity measuring range from 100 μS/cm to 200 mS/cm (extended range from 10 μS/cm to 200 mS/cm possible with cell-constant correction) within an operating temperature range of -30 °C to +100 °C. However, it easily withstands temperatures over 130 °C enabling processes like sterilization by autoclaving. Further advantages of the LFS1505 thin-film conductivity sensor include: — Wide conductivity and temperature range — Fast response time — Optimal accuracy — Resistance to various chemicals1) — Excellent long-term stability — Integrated RTD for temperature compensation — Four-electrode measurement2) — Customer-specific sensor available upon request The IST AG LFS1107 conductivity sensor is available with either Pt/Ni-wires or Cu/Ag-wires with PTFE-insulation (AWG 30) as standard wires.

The IST AG LFS1710 conductivity sensor offers a typical cell constant of 0.44 cm-1 and a conductivity measuring range from 0.2 mS/cm to 200 mS/cm within an operating temperature range of -30 °C to +100 °C. However, it easily withstands temperatures over 130 °C enabling processes like sterilization by autoclaving. Further advantages of the LFS1710 thin film conductivity sensor include: — Wide conductivity and temperature range — Fast response time — Optimal accuracy — Resistance to various chemicals1) — Excellent long-term stability — Integrated RTD for temperature compensation — Four-electrode measurement2) — Customer-specific sensor available upon request The IST AG LFS1107 conductivity sensor is available with either Pt/Ni-wires or Cu/Ag-wires with PTFE-insulation (AWG 30) as standard wires.