France
Manufacturer/ Producer
France
Robotic rotary bell atomizer with external charge electrodes & multi-trigger technology for water-based materials Description PPH 707 EXT external charge sprayer is dedicated to the application of waterborne materials. The performances of atomitzer and components are the same as the PPH 707 SB (dedicated to solvent paints); it is the benchmark in automotive finishing with external charge thanks to its Hi-TE technology. This version of the PPH 707 EXT features Multi-Trigger technology, which integrates a color change block in the body of the atomizer. This color change block allows for 1 super-high runner and 5 high runners, saving paint on color changes. High finish quality High transfer efficiency Easy integration Performance High rotating speed High voltage unit Hi-TE dual shaping air Dual circuit for fast color change Productivity Extremely low contamination by Dual Pin technology Large range of bell cups Lightweight for any painting robot Remote bell monitoring...
Request for a quoteFrance
Automatic Cleaning System for the applicator spray head Description Automatic cleaning of the contamination on the atomizer. It is specially designed for atomizers like ACCUBELL® and PPH models (equipped with all the existing types of bells : ø35 mm, ø50 mm, ø65 mm or ø80mm). Performance Air shroud cleaning device for a steady application Air/material cyclonic separator Productivity Increase your working time by reducing production stops Automatic process managed by paint automation Sustainability Reclaiming all cleaning material Operators spend less time cleaning with solvent
Request for a quoteFrance
Instant and accurate result Easy and ready to use Reference equipment for powder development laboratories PERFORMANCE Accurate and quick measurement of the fluidity and of the ability of the powder to be fluidized Compact PRODUCTIVITY Helps determine the powder spraying parameters Quality management of powder batches SUSTAINABILITY Easy to clean Saves time for the comissioning of new powder paint facilities and/or new colors in the process AS 100 fluidimeter has been designed for the specific purpose of determining the capabilities of powder to be fluidized. In the powder coating process, the powder is transported and projected onto the part by suspending it in the air. However, powders react very differently to this suspension depending on their grain size, degree of humidity, formula, etc. The AS 100 fluidimeter demonstrates this behaviour and indicates immediately whether a powder is suitable for spraying purposes. It is a...
Request for a quoteFrance
Feeding system for powder paint Description CUSTOMER'S BENEFIT Design without retention for optimal color changes Strength of the body thanks to the clamping, no deformation Easy to use, quick maintenance and no special tools required Access to the ejector without removing the tip of the powder hose Quick air coupling connectors with colorcoding and dissimilar Metal body and injector allowing solvent rinsing The conductive output tip improves the evacuation of the triboelectric charges thatmay be generated Quick clamping system with a uniform distribution regardless of the number of powder pumps
Request for a quoteFrance
InoBell is a rotating electrostatic powder bell sprayer that delivers high performance, excellent finishing quality & easy integration. Description High transfer rate Easy maintenance Easy integration Excellent finishing quality Performance Adjustable air shroud - allows a rapid and marked variation in cloud size (control of the jet can adjust the width of the cloud being implemented, proportionally) Integrated high voltage unit - no high voltage cable Excellent regularity of film build-up - the quality of finish meets the most stringent and tight D.O.I. (Distinctiveness of image). Productivity Strong electrostatic charge - up to 20% more transfer efficiency compared to conventional guns Flowrate of 1 inoBell equivalent to (2) guns Sustainability Single block design with fewer number of parts Powder bell is easy to disassemble To meet the requirements of companies looking to improve paint savings, SAMES KREMLIN has designed inoBell, The electrostatic powder bell with high...
Request for a quoteManufacturer/ Producer
13, chemin de Malacher
38240 Meylan - France
Turkey
Our wet painting booths are manufactured as standard or custom design according to the customer’s needs. For the cabin selection, the dimensions of the parts and the targeted capacity are the determining elements. Our booths are made of stainless steel or galvanized sheet and fully assembled with bolts. In our wet painting booth with solid filter, the air is sucked through the filters by exhaust fans while the unused wet paint is held by paper or fiber filters. And the clean and healthy environment is created by supplying the fresh air to the environment. Teflon (non-stick), solvent based and water based paint applications can be applied in our wet painting booths. We also design Flash off and Positive Pressure rooms for our wet paint plants. In flash off rooms, solvent separation process of painted parts is done. The solvent that released in these rooms is removed by exhaust fans and a healthy working environment is obtained.
Request for a quoteTurkey
Conveyors that we use for painting plants and various transfer lines are the most important parts of the automatic systems. Commonly used Webb, Kardan and Power & Free type conveyors are projected and put into used by us. Semi-automatic conveyor lines are also produced for lower production capacities.
Request for a quoteTurkey
Powder and Wet paint equipment must be determined and selected carefully according to the properties of the parts to be painted. In our systems, we use the highest quality, most efficient and most reliable, manual and automatic powder and wet paint guns, single and multi-axis robots.
Request for a quoteTurkey
Penetrant non-destructive testing method is a system that is used for the detection of cracks in the surfaces of parts. After the material which is going to be subjected to penetrant test is pre-cleaned, it is subjected to penetrant application as dipping or spray. After this process, the material is rinsed and dried. Powder “developer” is applied electrostatically on the dried material. Finally, possible cracks and faults on the material are detected by checking under the UV lamp.
Request for a quoteCreate one request and get multiple quotes form verified suppliers.