SENOL YILMAZ TECHNICAL HARDWARE AND HAND TOOL CORP.

Spark erosion involves removing material from a conducting part and eroding it to give it the desired shapes and dimensions by means of electrical discharges. In the wire sparks erosion process an unwinding metal wire, under tension, is immersed in water or in another insulating liquid (dielectric) with the part to be worked. The current transmitted forms an electric arc which gives rise to precise, programmed degradation of a section of the part. The residues created by wearing of the part are removed by the water or dielectric liquid. STEEC carries out both spark erosion and fine wire micro spark erosion operations Wires spark erosion and machining Equipped with the latest wire spark erosion technologies, STEEC is able to carry high precision cutting with wires of standard sizes whose diameter may vary from 0.15 to 0.25 mm in all types of mechanical parts.

New model P328/P328S with lithium ion (Li-Ion) 18V battery and reinforced motor for maximum autonomy (up to 600 strapping with a charge), the maximum tensile strength (up to 2400 N) and the reliability of the weld. The ease of insertion of the strap makes it very quick and simple to use. The independent settings of all parameters ensure optimum performance and maximum seal with polypropylene and polyester strapping of any size and quality.

The operator wrap the product with the strap, put the two ends through the buckle and places into the strapping tool. The first end is locked with the brake while the second is placed under the cutter and inside the tension roller. Increasing the tension of the strap, the buckle keeps the tension. After reaching the desired tension the strap is cut automatically by the tensioning device.

Pneumatic strapping tool with vibration welding XQD 19 for polyester strap PET, compact, handy and easy to use. The high traction force (2770 N max) and the short supporting base enable its use in every industrial sector for the closure of flat and round packages (with a minimum diameter of mm. 500). The operator simply inserts the two overlapped strips into the strapping tool, press a button to make the tension, a second button to get the vibration welding, and at the end a third button to pull out the tensioning device effortlessly.