Die heads - Import export

Simply headed articles (screws and bolts) with diameters ranging from 1.5 to 6 mm and a length of up to 650 mm. Possible materials: Regular steel, stainless steel, brass, copper, light metals. Available with all standard surfaces.

Ball-end thrust screws with full ball are used when a clean, polished contact surface is required.

The Hygienic DESIGN fastening system was specially developed for use in food processing facilities. Special attention was paid to the cleaning-optimised geometry and a surface finish of Ra ≤ 0.8 µm. The quick and easy installation due to a pre-installed sealing washer rounds off the overall package.

Steel grade 8.8, black. Stainless steel A 2-70, bright. Drawing reference: L2 = approx. 2x thread pitch

Universal fastening element. The hammer-headed screw is twisted into the profile slot and so can mounted into an existing systems at a later date. The serrations break through the anodised film and creates a secure, electrical conductive connection.

Ball lock pins are used for easy fastening or joining of components. The two balls are disengaged by pressing the push button and the pin can be slipped into holes in the workpieces. When the push button is released, the balls lock the connection securely. Shear force double shear (F) = S · τ aB max. The values given for the shear force are the theoretical breaking load. These are non-binding reference values without consideration of safety factors and exclude any liability. The values given are for information purposes only and do not constitute a legally binding assurance of properties. The load values have been calculated in accordance with DIN 50141. Each user must determine individually whether the ball lock pin is suitable for the respective application. Different materials in which the ball lock pins are used, weather conditions and wear can influence the determined values.

The floating joint unit is a bolt for connecting two components, that permits a desired movement of those components in relation to each other. The floating joint unit is mainly used when: a temperature change alters the dimensions of a component assembly inaccuracies occur manufacturing tolerances must be compensated for the position of the components varies due to dynamic loads

Ideal elements for fastening cladding panels, Plexiglas covers etc. The oversized flange and the thread undercut ensure a stress-free, uniform force distribution on the respective surfaces. Projecting edges are kept to a minimum by the head height being kept as low as possible. An open-end spanner is used to screw the fastener in. The surface of the ball head screw is polished and, with regard to design optimised for the use in hygienic environments. The surface is polished to a surface finish of less than Ra 0.8 µm. Dirt and residue from products or cleaners seldom adheres and easy cleaning is ensured.

EN ISO 7380-1 Form A: Hexagon socket button head screws. EN ISO 7380-2 Form B:Hexagon socket button head screws with collar.

The surface of the hexagon head bolt is polished and, with regard to design optimised for the use in hygienic environments. The bolt head is convex on the top face and the collar has a conical formed top surface. Instead of troublesome embossing or indentations, the bolt head is smooth with a surface finish of Ra 0.8 µm. Dirt and residue from products or cleaners seldom adheres and easy cleaning is ensured.

Form A with full ball is used when a clean, polished contact surface is required. Surfaces which are not flat and parallel can be firmly clamped or supported with Form B with flattened ball, the movable ball can adapt itself up to 9°. Drawing reference: Form A: full ball Form B: flattened ball Form BV: flattened ball, rotation lock Form F: serrated flattened ball Form FV: serrated flattened ball, rotation lock

Surfaces which are not flat and parallel can be firmly clamped or supported with with a flattened ball, the movable ball can adapt itself up to 9°. Longer versions have been designed especially to be glued in. This allows mechanical connecting elements with external thread to be made cost-effectively for small and medium-sized series. The ball has a rotation lock.

ENGINE MODEL F2CFE613L A026, F2CFE613C A011, F2CFE613N A010, F2CE9684E E017, F2CFE613C B004, F2CFE613N A011, F2CFE614G B002, F2CFE613C B006, F2CFE613R A021, F2CFE614G B003, F2CFE613C B041, F2CFE613S A020

The main purpose is to attach materials and equipment to concrete, natural stone, and brick. This is a simple and quick installation, namely: it is installed in a pre-drilled hole corresponding to the diameter and length of the anchor; it is wedged with a spacer cone when screwing into the anchor: a metal element (bolt, stud).

Material: PEEK Colour: light brown - Temperature: max. 180°C - High-strength and excellent form stability - High modulus of elasticity and excellent creep resistance - Resistant to many chemicals - Flammability rating: UL94 V0 - Further PEEK products: series 280 to series 285

Material: PE Colours: last digits 600 = white last digits 699 = black

Material: PEEK Colour: light brown - Temperature: max. 180°C - High-strength and excellent form stability - High modulus of elasticity and excellent creep resistance - Resistant to many chemicals - Flammability rating: UL94 V0 - Further PEEK products: series 280 to series 285

Material: PEEK Colour: light brown - Temperature: max. 180°C - High-strength and excellent form stability - High modulus of elasticity and excellent creep resistance - Resistant to many chemicals - Flammability rating: UL94 V0 - Further PEEK products: series 280 to series 285

FRIMO PURe Mix mix heads are available as two-component or multiple-component mix heads for various PU product manufacturing. Different sizes for the smallest and the largest output rates are available. FRIMO offers a patented PU spraying system for the production of high quality PU surfaces, such as for automotive interiors.

Head Cover (HC1) Wide Elastic Fastener

Safety and wearing comfort are the most important criteria for Protector Style 300, it provides best possible conditions for a easy, secure and modern helmet. Due to the proved Protector-technology in development of helmet interior in combination with high-density polyethylene for helmet shell leads to a very comfortable helmet. Features of Protector Style 300: Weight: 310g 30mm slot in order to combine ear- and face protection Rain gutter High wearing comfort by 4-point interior design Material: HPDE Head sizes: 50-66 cm Approvals: EN 397 VDE Accessories for Protector Style 300: Sweatbands (terry or leather) Chintrap with bungee or cotton Folding face protection Hearing protection

The shape of PF 112 Extreme has been proved in type A segmentation, inside is continually developed: the extensive endurance test in fire container of I.F.R.T (International Fire & Rescue Training) proved, that PF 112 Extreme withstand extreme encumbers. Often used by trainers it has been exposed to high demands. Hereby this helmet could exploit its strengths! MED- approval Helmet type A Made of high performance glass fibre GFK60 good isolation, best protection and low weight without any screw holes from the outside, i.e. no drilling hose in the helmet – 100% stability proven shape with maximal ear freedom comfortable headring leather cushion for easy change 6-point orb-weaving suspension CASCO Disc-Fit™- size adjustments, step less individual fitting to head size (53 – 64 cm), if needed in seconds adjustable Carrier net Loop for hanging up helmet Helmet: EN443:2008 Visor: EN 14458:2004

TOSS is in a unique position to supply products and services to North African and mediterranean markets. Moreover, it has built up a strong reputation for reliability, quality and fair trading and its repeat customer list includes major entities in Libya, Tunisia and Malta, and elsewhere in the region. Particularly, in sectors such as field equipment and engineering services, TOSS has been able to achieve significant market penetration. In the oil and gas sector, TOSS has been particularly successful in upstream and downstream applications ranging from wellheads, loading systems and metering systems.

Our core business is the Argentine Red Shrimp, which inhabits in the Southwest Atlantic Ocean, off the Patagonian Coast in the Argentina Sea, and which we commercialize in a wide range of formats and presentations. We have our own sea frozen fleet fishing, reprocessing and freezing the product on board while the vessel is offshore. That is the reason of the high quality and freshness of our products. We also own a reprocessing plant located within Rawson Port, where we reprocess and freeze the catching of our coastal ships, which work close to the shore. This guarantees the highest quality and freshness. Species: Pleoticus Müelleri Fishing zone: FAO 41 Capture method: Extractive fishing. Formats: 20×400 g 20×500 g 10×800 g 6×2 kg 2×7 kg Clasificación (ppKg): L1 > 10 – 20 ppKg L2 > 20 – 30 ppKg L3 > 30 – 40 ppKg L4 > 40 – 60 ppKg L5 > 60 – 80 ppKg

For differnt typs of application 10 heads, 14 heads,16 heads and 32,heads MULTI-HEAD Weighers Products VMT Series Sticks Weigher Large Cup Weigher Weighers With Seperate Electric Panel