Axle drive - Import export

Fullgear FD 80W-140, is an construction agricultural vehicles gear oil which is developed with quality base oils and advanced technology additives for limited slip (LS) differentials, wet brake system axles and final drive units. Extreme Pressure (EP) additives in its formulation provides effective wear protection even under high stress.

Fullgear FD 20W-40, is an construction vehicle gear oil which is developed with quality base oil sand advanced technology additives for limited slip(LS) differentials, wet brake system axles and final drive units.

Standard gear oil of so-called “moderate hypoid gear oils” for manual gearboxes, axle drives, transfer cases, overdrive gearboxes, overdrive clutches and steering systems. Application suitable for modern gearbox designs that do not require fully synthetic gearbox oil. Excellently suited for historic vehicles with manual gearboxes, also in conjunction with overdrive clutches, e.g. Laycock (note manufacturer's specifications). Specifications API GL-4 MB approval 235.1 ZF TE-ML 17A

Fullgear EP MT 80W, is ultra high performance gear oil for transmission, axle and final drives under extreme operating conditions. Its specially developed formulation provides effective wear protection under extreme operating conditions.

Castrol Transmax Axle EPX 80W-90 is a high-pressure gear oil of API class GL-5 for highly loaded axle drives and final drives (AP axles). Castrol Transmax Axle EPX 80W-90 can also be used in manual transmissions if the manufacturer requires an API GL-5 oil . Castrol Transmax Axle EPX 80W-90 protects against seizing and wear even under severe operating conditions. The gears remain clean and are protected from corrosion. Castrol Transmax Axle EPX 80W-90 ensures high functional reliability. Specifications API GL-5 MAN 342 M2 ZF TE-ML 05A, 12E, 16B, 17B, 19B, 21A Further information Transmax Axle EPX 80W-90 is

Standard gear oil of so-called “moderate hypoid gear oils” for manual gearboxes, axle drives, transfer cases, overdrive gearboxes, overdrive clutches and steering systems. Application suitable for modern gearbox designs that do not require fully synthetic gearbox oil. Excellently suited for historic vehicles with manual gearboxes, also in conjunction with overdrive clutches, e.g. Laycock (note manufacturer's specifications). Specifications API GL-4 MB approval 235.1 ZF TE-ML 17A

Gear Oil 85W140 is high performance, heavy duty gear lubricant formulated from high performance base oils and an advanced additive system. This lubricant is engineered for automotive applications including heavy duty axles and final drives where extreme pressures and shock loading are expected.It provide excellent performance where API GL-5 service is required. Applications : Heavy duty axles and final drives requiring API GL5 level performance Cars, on highway light and heavy duty trucks and commercial vehicles Off highway industries including: construction, mining, quarrying, and agriculture Other heavy duty industrial and automotive applications involving hypoid gears operating under conditions where high speed/shock load, high speed/low torque, and/or low speed/high torque prevail Specifications : Gear Oil 80W140 meets the following industry specification: 80W140 API GL-5 X

Castrol Syntrax Longlife 75W-90 is a fully synthetic axle gear lubricant for cars, heavy and light commercial vehicles and tractors. The performance reserves of Castrol Syntrax Longlife 75W-90 exceed the API class GL-5 and allow a significant extension of the existing oil change intervals (according to manufacturer regulations). Castrol Syntrax Longlife 75W-90 can be used in all axle drives and differentials without a multi-plate lock if a GL-5 lubricant with SAE 75W-90 is required. Advantages -Extremely high pressure absorption capacity -Excellent high-temperature stability -Significantly reduced gear oil temperature -Absolute shear stability -Excellent lubrication security at very low temperatures -Neutral sealing behavior -Excellent foam resistance -Extended oil change intervals possible (observe manufacturer's instructions) Specifications API GL-5 MAN 342 Type S1 Scania STO 1:0 ZF TE-ML 05A,12B,17B,19C,21A BMW (Non LS Rear Axles)

DANA LUBES Gear Oil 80W90 is high performance, heavy duty gear lubricant formulated from high performance base oils and an advanced additive system. This lubricant is engineered for automotive applications including heavy duty axles and final drives where extreme pressures and shock loading are expected.It provide excellent performance where API GL-5 service is required. Applications : * Heavy duty axles and final drives requiring API GL5 level performance * Cars, on highway light and heavy duty trucks and commercial vehicles * Off highway industries including: construction, mining, quarrying, and agriculture * Other heavy duty industrial and automotive applications involving hypoid gears operating under conditions where high speed/shock load, high speed/low torque, and/or low speed/high torque prevail Available packing :- 1ltr,4ltr,5ltr,20ltr,25ltr,208ltr,1000 ltr All our Oils are Manufactured in our State of Art Facilities in UAE ( www.danalubes.com) and exported worldwide .

Gear Oil 80W90 is high performance, heavy duty gear lubricant formulated from high performance base oils and an advanced additive system. This lubricant is engineered for automotive applications including heavy duty axles and final drives where extreme pressures and shock loading are expected.It provide excellent performance where API GL-5 service is required. Applications : Heavy duty axles and final drives requiring API GL5 level performance Cars, on highway light and heavy duty trucks and commercial vehicles Off highway industries including: construction, mining, quarrying, and agriculture Other heavy duty industrial and automotive applications involving hypoid gears operating under conditions where high speed/shock load, high speed/low torque, and/or low speed/high torque prevail Specifications : Gear Oil 80W90 meets the following industry specification: 80W-90 API GL-5 X

Castrol Axle EPX 90 is a high-pressure gear oil of API class GL-5 for highly loaded hypoid gears and final drives (AP axles). Castrol Axle EPX 90 protects against seizing and wear even under severe operating conditions . The gearboxes remain clean in the long term and are permanently protected against corrosion. Gearboxes lubricated with Castrol Axle EPX 90 offer a high level of functional reliability. Specifications API GL-5 MB release 235.0 ZF - TE-ML 16C, 17B, 19B, 21A

Fulltrac Fluid X 10W-30, is a multi purpose (UTTO) transmission oil for automatic or manuel transmissions, hydraulic, axle, wet brake systems, final drives and PTO (Power Take Off) of tractor and agricultural machines. Quality base oils and anti-friction additives in its formulation provides high performance while power transmission of moving equipments.

Fullgear FD 10W-30, is a multi purpose transmission oil for manual or automatic transmissions, hydraulic, axle, wet brake systems, final drives and PTO (Power take Off) of construction machines. Quality base oils and anti-friction additives in its formulation provide high performance while power transmission in moving components.

Castrol Transmax Manual EP SAE 80W is a versatile mineral oil-based high-pressure gear oil of API class GL-4 for manual and axle gears. Application Castrol Transmax Manual EP 80W is preferably used in synchronized and unsynchronized manual transmissions as well as drive axles of cars, commercial vehicles, buses, agricultural and construction machinery subject to normal loads. When using it, the manufacturer's instructions must be observed. Specifications API GL-4 MB release 235.1 ZF TE-ML 17A Further information Transmax Manual EP 80W is registered under the following ZF number: ZF004862

Fulltrac Fluid Y 10W-30, is a high performance transmission oil (UTTO) produced with a unique combination of additive package and special base oils. Its specially developed for manual or “Power-Shift”, “Shuttle-Shift” and CVT automatic transmissions, axles, wet brake systems, final drives, hydraulic and hydraulic pump systems requiring the use of high shear stability of agricultural and construction equipments.

Fulltrac Fluid III 20W-30, is a multi purpose transmission oil for manuel transmission, hydraulic, axle, wet brake system, final drives and PTO (Power Take Off) of construction and agricultural machines. Quality base oil oils and anti-friction additives in its formulation provides high performance while power transmission of moving equipments.

Castrol Transmax Axle EPX 85W-90 is a high-pressure gear oil of API class GL-5 for highly loaded hypoid gears and final drives (AP axles). Castrol Axle EPX 90 protects against seizing and wear even under severe operating conditions. The gearboxes remain clean in the long term and are permanently protected against corrosion. Gearboxes lubricated with Castrol Transmax Axle EPX 85W-90 offer a high level of functional reliability. Advantages Excellent pressure absorption capacity Long-lasting wear protection Good corrosion protection Excellent foam resistance Good sealing compatibility Specifications API GL-5 MB approval 235.0 ZF - TE-ML 16C, 17B, 19B, 21A Application note Castrol Transmax Axle EPX 85W-90 is among the ZF registered with the following ZF release numbers: ZF003394

It is a high performance gear oil developed far use in extreme pressure resistant, rust, oxidation and antifouling applications in hypoid gear systems, axles and final drives operating under extreme conditions. it was designed ta provide the lowest power loss and outstanding gear efficiency with a new generation solid package content that conforms ta the operating principle of differential systems.

Trans Final Drive SAE 60 has been specifically developed to fulfill the unique demands of final drives and axles that currently call for Caterpillar FD-1™ type oils, as well as applications necessitating Caterpillar TO-4™ oils, without the presence of friction materials.

Roadranger SAE 50 is a mineral oil-based lubricant designed for a wide range of applications, including Roadranger gearboxes, as well as automotive and industrial uses that do not require extreme pressure resistance. Thanks to its high viscosity index and low pour point, this lubricant forms a robust and highly adhesive film to safeguard gear teeth and bearings against wear. When the manufacturer recommends API service GL-1 or GL-2 gear oil, Roadranger SAE 50 is a suitable choice. It is also ideal for lubricating various manual transmissions in mild gear oil applications, as well as for use in some spiral bevel axle assemblies and worm gear drives found in commercial, agricultural, and truck equipment

Advance Plus Syn Roadranger SAE 50 is crafted from premium synthetic base oils and esters, designed specifically for use in Roadranger gearboxes. It’s a versatile lubricant suitable for a wide range of automotive and industrial applications, including transmissions, differentials, and final drives that demand TO-4 performance, particularly in cases where extreme pressure properties are not required. Advance Plus Syn Roadranger SAE 50 can also be employed in instances where the manufacturer recommends an API GL-1 service gear oil. Additionally, it serves well in mild gear oil applications within certain manual transmissions, spiral bevel axle assemblies, and worm gear drives found in commercial, agricultural, and truck equipment.

The Auto-Lok Differential is used on the primary drive axle and replaces the limited slip or open differential.

Operating Weight: 2350kg Rated Bucket Capacity: 0.4CBM Bucket Width: 1400mm Max. Breakout Force: 28 KN Max. Tilt Angle of Cabin: 30deg. Max. Dumping Height: 2300mm Max. Dumping Reach: 750mm Raising Time: < 4.0s Min. Ground Clearance: 240mm Overall Dimensions: 4700x1600x2350mm Min. Turning Radius: 4600mm Engine: 20kW/2200rpm CHANGCHAI L28 / CHANGCHAI ZN385Q Horizontal, Water-cooled Evaporative, Single-cylinder Diesel Engine Min. Fuel Consumption Ratio of Engine: 269g/kW.h Transmission Mode: Manual Transmission (with Hand-Lever Shifter) Gear Shift: 3 FWD, 1 REV Max. Speed: 25km/h Mode of Axle: 130 Drive Axle Wheel Tread: 1285mm Wheel Base: 2170mm Drive Mode: 4-wheel Drive Full Hydraulic Steering System: BZZ-80 System Working Pressure: 10 Mpa Service Brake: Foot Pedal Hydraulic Expansion-shoe Brake on 4 Wheels Parking Brake: Hand Lever Flexible Shaft Controlled Disc Brake Tyre Type Specification: 7.50-16-14PR Front/Rear Tyre Pressure: 0.40Mpa/0.35Mpa

Operating Weight: 3400kg Rated Bucket Capacity: 0.7CBM Bucket Width: 1730mm Max. Breakout Force: 36KN Max. Tilt Angle of Cabin: 30deg. Max. Dumping Height: 2650mm Max. Dumping Reach: 1020mm Raising Time: < 4.5s Min. Ground Clearance: 260mm Overall Dimensions (L x W x H): 4800x1730x2650mm Min. Turning Radius: 4500mm Engine: 37kW/2200rpm CHANGCHAI 4L68 Diesel Engine Min. Fuel Consumption Rate: 230g/kW.h Transmission Mode: YJ240 Integrated Hydraulic Torque Converter Gear Shift: 1 F, 1 R, 1 High Speed, 1 Low Speed Max. Speed: 25km/h Mode of Axle: ISUZU Drive Axle Wheel Tread: 1500mm Wheel Base: 2100mm Drive Mode: 4-wheel Drive Hydraulic System Working Pressure: 16Mpa Hydraulic System Working Pump Type: Gear Pump Service Brake: Foot Pedal Single-line, Hydraulic, Expansion-shoe Brake on 4 Wheels Parking Brake: Hand Lever Flexible Shaft Controlled Disc Brake Tyre: 12.00-16-12PR Front/Rear Tyre Pressure: 0.40Mpa/0.35Mpa

1. Rated Load: 1000kg 2. Operating Weight: 3300kg 3. Rated Bucket Capacity: 0.6CBM 4. Bucket Width: 1700mm 5. Max. Breakout Force: 26KN 6. Max. Tilt Angle of Cabin: 30deg. 7. Max. Dumping Height: 2600mm 8. Max. Dumping Reach: 850mm 9. Raising Time: < 4.0s 10. Min. Ground Clearance: 230mm 11. Overall Dimension: 4750x1730x2720mm 12. Min. Turning Radius: 4000mm 13. Engine: 29kW/2200rpm CHANGCHAI ZN490Q Diesel Engine 14. Transmission Mode: YJ240 Hydraulic Torque Converter 15. Gear Shift: 1 FWD, 1 REV, 1 High Speed, 1 Low Speed 16. Max. Speed: 25km/h 17. Mode of Axle: ISUZU Drive Axle 18. Wheel Tread: 1400mm 19. Wheel Base: 1580mm 20. Drive Mode: 4-wheel Drive 21. Hydraulic System Working Pressure: 16Mpa 22. Hydraulic System Working Pump Type: Gear Pump 23. Service Brake: Foot Pedal Drum Brake on 4 Wheels 24. Parking Brake: Hand Lever Flexible Shaft Controlled Disc Brake 25. Tyre Type: 8.25-16-14PR 26. Front/Rear Tyre Pressure: 0.40Mpa/0.35Mpa

Operating Weight: 5650kg Rated Bucket Capacity: 0.85CBM Bucket Width: 1900mm Max. Breakout Force: 45KN Max. Tilt Angle of Cabin: 30deg. Max. Dumping Height: 2800mm Max. Dumping Reach: 1050mm Raising Time: < 5.0s Min. Ground Clearance: 350mm Overall Dimensions (L x W x H): 5600x1950x2750mm Min. Turning Radius: 4600mm Engine: 47kW/2400rpm WEICHAIHUAFENG ZHBG41 Diesel Engine Min. Fuel Consumption Rate: 258.4g/kW.h Transmission Mode: ZL280 Integrated/Split Hydraulic Torque Converter Gear Shift: 1 F, 1 R, 1 High Speed, 1 Low Speed Max. Speed: 25km/h Mode of Axle: ZL16 Hub Reduction Drive Axle Wheel Tread: 1500mm Wheel Base: 2150mm Drive Mode: 4-wheel Drive Hydraulic System Working Pressure: 20Mpa Hydraulic System Working Pump Type: Gear Pump Service Brake: Foot Pedal Vacuum Booster, Air over Hydraulic Caliper Disc Brake on 4 Wheels Parking Brake: Hand Lever Flexible Shaft Controlled Disc Brake Tyre: 16/70-20-16PR Front/Rear Tyre Pressure: 0.40Mpa/ 0.35Mpa

Operating Weight: 4175kg Rated Bucket Capacity: 0.8CBM Bucket Width: 1800mm Max. Breakout Force: 36.8KN Max. Tilt Angle of Cabin: 30deg. Max. Dumping Height: 2700mm Max. Dumping Reach: 1000mm Raising Time: < 6.0s Min. Ground Clearance: 290mm Overall Dimensions (L x W x H): 5300x1800x2750mm Min. Turning Radius: 4500mm Engine: 36.8kW/2650rpm XINCHAI A498BT1 (EURO III) Diesel Engine Min. Fuel Consumption Rate: 230g/kW.h Transmission Mode: ZL265 Integrated Hydraulic Torque Converter Gear Shift: 1 F, 1R, 1 High Speed, 1 Low Speed Max. Speed: 25km/h Mode of Axle: ZL16 Hub Reduction Drive Axle Wheel Tread: 1500mm Wheel Base: 2100mm Drive Mode: 4-wheel Drive Hydraulic System Working Pressure: 16Mpa Hydraulic System Working Pump Type: Gear Pump Service Brake: Foot Pedal Vacuum Booster, Air Over Hydraulic Caliper Disc Brake on 4 Wheels Parking Brake: Hand Lever Flexible Shaft Controlled Disc Brake Tyre: 20.5/70-16-14PR Front/Rear Tyre Pressure: 0.40Mpa/0.35Mpa

Operating Weight: 6200kg Rated Bucket Capacity: 1.4CBM Bucket Width: 2150mm Max. Breakout Force: 64KN Max. Tilt Angle of Cabin: 30deg. Max. Dumping Height: 3500mm Max. Dumping Reach: 1300mm Raising Time: < 6.0s Min. Ground Clearance: 380mm Overall Dimensions (L x W x H): 6570x2200x2850mm Min. Turning Radius: 4800mm Engine: 74.9kW/2400rpm DONGFANGHONG YT4B2Z-24 Turbocharged Diesel Engine Min. Fuel Consumption Rate: 210g/kW.h Transmission Mode: ZL280 Hydraulic Torque Converter Gear Shift: 1 F, 1 R, 1 High Speed, 1 Low Speed Max. Speed: 25km/h Mode of Axle:ZL20 Hub Reduction Drive Axle Wheel Tread: 1650mm Wheel Base: 2600mm Drive Mode: 4-wheel Drive Hydraulic System Working Pressure: 20Mpa Hydraulic System Working Pump Type: Gear Pump Service Brake: Foot Pedal Vacuum Booster, Air over Hydraulic Caliper Disc Brake on 4 Wheels Parking Brake: Hand Lever Flexible Shaft Controlled Disc Brake Tyre: 16/70-24-16PR Front/Rear Tyre Pressure: 0.40Mpa/0.35Mpa

Reclamet has a wide range of salvage cars, motorcycles and commercial vehicles. New auction listings added on a regular basis. Salvage market offers auction bidding on online salvage from across the UK. Our salvage is sourced direct from: British insurers, dealer part exchange, finance repossession, ex lease, company vehicles, mechanical and accident damage repairable cars. We stock used car parts for any type of vehicle, cars, vans & 4×4’s including Engines, Radiators, Gearbox, Start Motor, Wheel Bearings, Timing Chain Kits, Steering, Alternator, Suspension, Brakes, Head Light, Rear Light, Glass, Doors, Interiors, Alloy Wheels, Steel Wheels, Tyres, Body Panels, Wiper Motor, ABS Pumps, Wing Mirror, Switches, Bumpers, Drive Shaft, Axle, Beams, Parcel Shelf, Power S/Rack, Bonnet, Grille, Wing, Tailgate, Glovebox etc If you’d like to get some advice before you shop online or call in to the yard, please feel free to call us on: 01843 823554 / 01843 823224