Coated seals - Import export

Our product range provides solutions for a wide range of applications. Our sealing compounds and adhesives are mainly used within the high temperature range. All wezi-lit products distinguish themselves by their high quality and excellent processing properties. They are characterised by a special recipe that adapts them to the specific needs of the required application whether it is elastic or highstrength, heatresistant or fireproof, or free of asbestos and fibres. We can also customise desired processing properties such as viscosity and longterm storage. If required, we produce the water glass based sealant separationfree, so that no sedimentation occurs during a container's storage.

• The face shield is made of 1 mm thick Polycarbonate • Excellent optical quality • High resistance to temperature extemes approx. -50°C to +135°C • Good UV protection • High impact strength • IR-protection shade 4-6 • Additional protection of neck and chin due to fully enclosed face shield

• The face shield is made of 1 mm thick Polycarbonate • Excellent optical quality • High resistance to temperature extemes approx. -50°C to +135°C • Good UV protection • High impact strength • IR-protection shades 4-4 and 4-5 available • Additional protection of neck and chin due to fully enclosed face shield

• The face shield is made of 1 mm thick Polycarbonate • Excellent optical quality • High resistance to temperature extremes approx. -50°C to+135°C • Good UV protection • 94% of the radiant heat is reflected by the gold layer • IR-protection shade 4-5

• The face shield is made of 1 mm thick Polycarbonate • Excellent optical quality • High resistance to temperature extemes approx. -50°C to +135°C • Good UV protection • High impact strength • IR-protection shades 4-4 and 4-5 available • Additional protection of neck and chin due to fully enclosed face shield

• The face shield is made of 1 mm thick Polycarbonate • Excellent optical quality • High resistance to temperature extremes approx. -50°C to +135°C • Good UV protection • High impact strength • 94% of the radiant heat is reflected by the gold layer • IR-protection shade 4-4

• The face shield is made of 1 mm thick Polycarbonate • Excellent optical quality • High resistance to temperature extremes approx. -50°C to+135°C • Good UV protection • 94% of the radiant heat is reflected by the gold layer • IR-protection shade 4-6

Highly effective water-repellent concentrate for concrete products, mainly for polymer-sealed or coated concrete products. Very strong water-repellent effect, reduction of capillary water absorption and atmospheric water absorption, minimizes efflorescence.

Highly effective water-repellent concentrate for concrete products, mainly for polymer-sealed or coated concrete products. Very strong water-repellent effect, reduction of capillary water absorption and atmospheric water absorption, minimizes efflorescence.

The shrink tunnel, equipped with temperature adjustments, height and speed, is incorporated in order to make the machine compact and versatile, suitable for series production. The welding time is electronically set and the absence of fumes is ensured by teflon-coated blades. The sealing bar motorized, equipped with security system, the closed circuit cooling plant and motorized scrap-winder, are part of the standard equipment of the machine. FEATURES Digital panel with 6 programs Descent sealing bar manual or automatic Discharge conveyor for product Legs with locking wheels Only welding and welding + retraction Sealing bars with closed-circuit cooling system and patented safety system Emergency switch Teflon coated sealing bars Electromechanical automats Welding speed automatic controller Motorized conveyor belt with adjustable height Motorized scrap-winder Air flow shrink tunnel swiveling Adjustable temperature with electronic temperature controller

BS 8060 LINE SEMIAUTOMATIC ANGULAR PACKAGING MACHINES Large angular packaging machines with manual or automatic closing of the sealing bar and motorized carpet for product discharge. This machines are capable of packaging bulky products using any type of single-folded film reel (PE-PP-PVC). The package is sealed on all sides, and if you want a thermo retracted packaging, the machine can be matched to the powerful tunnel BS 5540 M. Features: NI-CR sealing blade with non-stick coating Sealing time control to avoid overheating Adjustable conveyor height by handwheel Double magnet for a high closing force Reel sliding on recirculating ball guides, useful width mm. 750 Return of the sealing bar controlled by a gas spring (for manual version BS 8060L) Pneumatic device (compressed air) for closing and opening the sealing bar (for the semi-automatic version BS 8060LA)

Dry lubrication of the most varied materials sliding on top of or rubbing against each other (such as metals, wood, ceramic, rubber, and also adhesives or paintable plastics) Anti-stick coating of seals or sealing surfaces of all kinds to prevent sticking-on To cure the squeaking noises of soft on hard materials For water-repellent impregnation of absorbent materials Separating film in cast resin applications Advantages and benefits Dry, non-soiling film Highly effective due to good adhesion to prepared substrates Colourless and odourless low-friction coating with non-stick properties Prevents frictional corrosion Dries at room temperature

Dry lubrication of most different materials sliding on resp. rubbing against each other like metals, wood, ceramics, rubber as well as paintable plastics For packing machines, sliding areas in the plastics and textile industry, rollers and chutes in the transport range, etc. Non-stick coating of all kinds of sealings and sealing areas to avoid sticking, squeaking of soft on hard materials (e.g. rubber on glass), for water-repellent impregnation of absorbing materials or as separating film for casting resin applications Advantages and benefits Thin, tack-free separating film with very good adhesive properties on prepared surfaces Best suitability for low-friction lubrication of all kind of materials in contact Colourless and odour-free antifriction coating with non-stick properties

Dry lubrication of the most varied materials sliding on top of or rubbing against each other (such as metals, wood, ceramic, rubber, and also adhesives or paintable plastics) Anti-stick coating of seals or sealing surfaces of all kinds to prevent sticking-on To cure the squeaking noises of soft on hard materials For water-repellent impregnation of absorbent materials Separating film in cast resin applications Advantages and benefits Dry, non-soiling film Highly effective due to good adhesion to prepared substrates Colourless and odourless low-friction coating with non-stick properties Prevents frictional corrosion Dries at room temperature Also available as spray version OKS 571

This new generation of litter bins offers some heavy duty advantages: their particularly robust interiors and wall thickness of 2.0–3.0 mm mean that they are extremely well protected against vandalism. An innovative sealed coating on the surface which is oven-hardened at 200 degrees, makes it difficult for dirt to get a hold. Graffiti – even using permanent markers – can simply be wiped away without the need for harsh cleaning products. Unwanted stickers can be easily removed.

Heat-sealing roller FP802/803 with constant heat which allows the sealing of bags and heat-sealable materials. This roller allows you to make seals with different shapes (square, circular, etc.) according to your needs. Once the roller has been switched on, the operator must wait for the roller to warm up for about 10 minutes. The temperature is adjustable via a potentiometer and reaches a maximum of 200 ° C. There is no graduated scale. The temperature must therefore be set following practical tests on the material. The use is manual. The pressure, the sealing time and the temperature must be managed by the operator. The sealing result depends exclusively on its ability and therefore the result can vary between seals. The coating of the anti-adhesive Teflon roller allows to seal bags in polypropylene, polyethylene and laminated materials. It is supplied complete with a mat in silicone material which, positioned under the product to be sealed, is the ideal match for sealing.

OHLER offers a wide range of aluminum foil trays. All materials have been developed to be filled both manually and automatically. They are available in various sizes and thicknesses, and the trays can even be lacquered or printed. Our range of aluminum containers is complemented by a variety of accessories including aluminum lids, closing and sealing foils, coated carton lids, plastic snap-on lids, insulated transport boxes and closing machines. Our aluminum trays can be used both in microwave and conventional ovens or with barbeque grills. Aluminum food containers protect food from deterioration. The lightest “complete barrier” available, aluminum is impervious to light, gas, water vapor, oils, fats, oxygen and microorganisms. They keep foods fresh, safe and tasty, maintaining quality throughout a long shelf life.

Alumina Ceramic Cavity Laser Reflectors Introductions : High purity porous alumina ceramic of 99% Al2O3 content, used extensively for long-life laser reflectors. This material is sintered at high temperatures to achieve a controlled porosity. Ceramic Reflector Prime Features: > Surfaces can be sealed and coated with a solarization-resistant glaze to give high bulk refectivity > 97% reflectance efficiency at 600-1000nm > Reflectance efficiency exceeds 95% across the wavelength range 400-1200nm (see curve) > Controlled porosity > Good thermal conductivity > High electrical resistivity Ceramic Cavity Laser Reflectors Physical properties: > Color: White > Bulk density (fired), Mg/m3 :3.1 > Porosity (apparent), % nominal :22 > Flexural strength (ASTM C1161, 3-point), MPa :170 > Thermal expansion coefficient 200-500C, 10-6 /C 7.9 200-1000C, 10-6 /C 9.0

The material of ceramic reflector is 99% Al2O3.Its green body is fired at a suitable temperature to retain the proper porosity and strength. The surface of the ceramic reflector is coated with a high reflectivity ceramic glaze ,so compared with the gold-plated reflector , its has long service life and diffuse reflection. Prime Features: - Surfaces can be sealed and coated with a solarization-resistant glaze to give high bulk refectivity - 98% reflectance efficiency at 600-1000nm - Reflectance efficiency exceeds 96% across the wavelength range 400-1200nm (see curve) - Controlled porosity, Good thermal conductivity, High electrical resistivity. Physical Characteristics: - Color: White - Density: 3.1Mg/m^3 - Porosity: 22% - Flexural strength: 170Mpa - Coefficient of thermal expansion: 7.9×10^-6--/С (200～500℃) 9×10^-6/С (200～1000℃)

High Hermeticity Metallized Ceramic Bushing Features: 1.Material: 96% Aluminia(AL2O3) 2.Coating Layer:Molybdenum-Mananese(Mo/Mn) 3.These metallized ceramics are ideal for high voltage, high vacuum and high pressure applicationos. So far the most widely-used and effective method for creating a leak-tight, robust joint between ceramic and metal is by brazing . A thin layer of metal deposited on a ceramic part enables brazing between ceramic and metal part that h as a different coefficient of thermal expansion. A layer of Molybdenum-Manganese is deposited with a typical thickness of 8 to 30 µm after sintering. The metallized surface receives a secondary coating of nickel to seal and improve wettability for later brazing. Applications: Electrical transmission and distribution Electronics industry Textile machinery Defense Medical electronics Automobile industry Sealing Solid Oxide Fuel Cells High temperature application

High Hermeticity Metallized Ceramic Bushing /Innovacera Features: 1.Material: 96% Aluminia(AL2O3) 2.Coating Layer:Molybdenum-Mananese(Mo/Mn) 3.These metallized ceramics are ideal for high voltage, high vacuum and high pressure applicationos. So far the most widely-used and effective method for creating a leak-tight, robust joint between ceramic and metal is by brazing . A thin layer of metal deposited on a ceramic part enables brazing between ceramic and metal part that h as a different coefficient of thermal expansion. A layer of Molybdenum-Manganese is deposited with a typical thickness of 8 to 30 µm after sintering. The metallized surface receives a secondary coating of nickel to seal and improve wettability for later brazing.

: Completely made out of stainless steel 316. Green PTFE coated bolts. Sealing against 42.7 bar (620psi) maximum up untill DN 50 (2″) and it has a progressive sealing. Available in different lenghts from 100 to 250 mm (3.9″ to 9.8″). No special tools or skilled people are required to install the Repico® repair clamps. Quick to install (minutes). It requires limited space for installation, just a bit bigger than the pipe OD. Repico® repair clamps are more durable and stronger than repair tape. Light weight.

These Portuguese tiles earrings are made to replicate real ceramic antique tiles that are found on monuments, public buildings and private houses. Perfect for daily wearing Goes with Casual chic outfits The earrings measure about 15 mm x 9 mm It's very light weighted The replica is made on a wood piece The wood piece is cut, sanded and ready to be transformed The design is transferred to the wood It's then sealed and coated with water based and non toxic varnish, just like in ceramic pieces Nickel and lead free earring base Anti-allergic Lightweight Unique designs only found on this shop Handmade in small production and usually made to order

These Portuguese tiles earrings are made to replicate real ceramic antique tiles that are found on monuments, public buildings and private houses. Perfect for daily wearing Goes with Casual chic outfits, vintage style and rose pink coloras as well as aqua blue. The earrings measure about 61 mm x 17 mm Stainless steel metal: highly resistant, doesn't change color and anti allergic Gold brass Aqua Beads It's very light weighted The tile replica is made on a wood tile The wood piece is cut, sanded and ready to be transformed The design is transferred to the wood It's then sealed and coated with water based and non toxic varnish, just like in ceramic pieces Nickel and lead free earring base Anti-allergic Lightweight Unique designs only found on this shop Handmade in small production and usually made to order

These Italian tiles bracelet is made to replicate real ceramic antique tiles that are found on monuments, public buildings and private houses. Perfect for daily wearing Goes with Casual chic outfits Each tile measure about 12 mm x 12 mm It's very light weighted Stainless steel Colorful Beads The tile replica is made on a wood tile The wood piece is cut, sanded and ready to be transformed The design is transferred to the wood It's then sealed and coated with water based and non toxic varnish, just like in ceramic pieces Nickel and lead free earring base Anti-allergic Lightweight Unique designs only found on this shop Handmade in small production and usually made to order

These Portuguese tile patterned bangle bracelet is made to replicate real ceramic tiles. The Ceramic Clay Collection was designed with the intention of making original designer's pieces and enhance the Portuguese tiles masterpiece itself. Perfect for a multitude of events and occasions: Birthdays, Valentine's, Weddings, Mother's Day, Anniversary's, Proms, dinner with friends, company's dinner, going to work, Family gatherings, Christmas, etc. Also great with jeans and Tee's, or light neutral dresses, boho chic and casual wear You can combine this bracelet with other Ceramic Clay pieces on this collection This wide bangle opens and closes according to your arm size. Height: 40 mm Hand sculpted Hand painted Clay sealed and coated with water based and non toxic varnish, just like in ceramic pieces Nickel and lead free base Silver or gold base options available Anti-allergic

This Mexican tile pendant is made to replicate real ceramic tiles with real patterns. Perfect to wear with white, denim, Mexican typical styled dresses, bold outfits, colorful clothing in any occasion of the day Great for the season's trend of colorful pieces and as a statement piece that stands out for itself Measure 2.5 cm x 2.5 cm (1'' x 1'') It's very light weighted Antique Bronze Square base The replica is made in a squared wood tile It's then sealed and coated with water based and non toxic varnish, just like in ceramic pieces 24 karats of champagne gold chain Nickel and lead free base Anti-allergic

The Moroccan Teardrop Tiles Earrings features the pattern of Moroccan ceramic Art on tiles and Pottery. It sits beautifully on the ears, being noticeable, but not being too much and looks stunning, whether worn alone or layered with other adornments in your ears. Material: Nickel and Lead free gold plated ear wires and Mother of Pearl. Ear Wires Finish: Gold Plated Featuring 25 mm x 15 mm Teardrop Tile in Mother Pearl Shell, Handmade in France Anti allergic Resistant & Durable Lightweight Sealed and coated with water based and non toxic varnish, just like in ceramic pieces Nickel and lead free metal

These Italian tiles earrings are made to replicate real ceramic antique tiles that are found on monuments, public buildings and private houses. Perfect for daily wearing Goes with Casual chic outfits The earrings measure about 55 mm x 28 mm Stainless steel metal: highly resistant, doesn't change color and anti allergic It's very light weighted The replica is made on a wood tile The wood piece is cut, sanded and ready to be transformed The design is transferred to the wood It's then sealed and coated with water based and non toxic varnish, just like in ceramic pieces Nickel and lead free earring base Anti-allergic Lightweight Unique designs only found on this shop Handmade in small production and usually made to order