Compressed air equipment - Import export

Don’t overlook the importance of an effective and efficient air compressor. It is essential to select an air compressor that is suited to your needs. Ingersoll Rand – Ingersoll Rand is a manufacturer with various brands that are utilised by leading entities in all kinds of industrial, commercial, and residential markets. Champion - A budget friendly compressed air solution that ticks all the boxes. Rotair – Rotair’s air compressors are designed with intelligent systems that prevent overloading in engines thanks to pre-heating and depressurisation. Find air compressors in Malta from leading manufacturers Ingersoll Rand, Champion, and Rotair.

Cycling refrigerated dryer design helps you achieve optimal performance at a lower cost compared to a Digital Cycling design.To reduce energy consumption, the dryer refrigeration system automatically deactivates during periods of low load and features a patented heat exchanger and thermal mass circuit.MCY Series Air Dryers are highly reliable, efficient, have small space requirements and offer low cost ownership. Integration of pre / post filtration within the dryer cabinet saves labour time, installation cost and valued production space. The compact size also offers flexibility and economy during transportation.

A centrifugal blower and high efficiency heater eliminate the use of valuable compressed air for desiccant regeneration.The completely automatic drying system uses blower to pull ambient air and pass it through the heater. This hot air stream flows opposite to drying flow direction. Hot air above 200⁰C regenerates the moisture inside desiccant bed and strips it completely of all moisture. The advanced control system monitors the dew point and adjusts the heating/regeneration accordingly thereby providing valuable energy savings.

Mikropor Compressed Air Filters have been designed to meet all requirements of the compressed air filtration world. These air filters provide more comfortable usage for end users with an increased endurance, higher efficiency at lower pressure drop and more port size options.The air filters have four efficiency ratings, removing contaminants as small 0.01 micron at up to 290 psi (20 bar)- 1/4” to 3” NPT/BSP pipe sizes. A protected auto float drain (2 mm orifice) is standard for optimal and reliable removal of liquid contaminants. These air filters have a zero-porosity aluminium and durable epoxy powder-coat finish, along with a corrosion-resistant internal coating for a long service life. Filter combinations are configured to meet specific application requirements. Filters comply with PED and perform as per related ISO 8573 standards. These filters may be equipped with differential pressure gauges for easy maintenance and energy efficiency.

With over 30 years of experience Mikropor manufactures the best performing replacement elements in the industry. Mikropor offers four layers of Superior Protection-from 1 micron to 0.01 micron. Durable element construction and an efficient drain layer ensure continued performance with optimal element change periods.Additionally, High efficiency Micro-Glass nanofiber media (80 times finer than Cellulose Fiber) delivers higher targeted efficiencies, longer service life, wide chemical and synthetic lubricant compatibility even at extreme working temperatures.Mikropor assures that the replacement elements perform equal to or better than the original elements. Replacement elements have been designed and tested in ourstate-of-the-art test laboratories.

"This design achieves a hyper-efficient 100% contact between the air and refrigerant circuits, delivering state-of-the-art performance and great cooling efficiency. The state-of-the-art 3-in-1 design features very low differential pressure delivering significant energy savings. The 3-in-1 Heat-Exchanger is compact and allows the dryer to be smaller and reduces the space required for the dryer. Mikropor offers a variety of 3-in-1 dryers equipped with the 3-in-1 Heat-Exchanger to meet a full range of capacity and power requirements."

"Mikropor is proud to announce that the new MK-DS series explicitly prevails over any other type of refrigerated air dryer by achieving everyone’s goal to lower energy costs. The MK-DS Series, with a specially designed heat exchanger and digital scroll compressor, provides unrivalled energy efficiency in a refrigerated air dryer. The challenge of maintaining a stable dewpoint and saving energy can be overcome with this latest technological development. Combining Mikropor’s expertly designed heat exchanger, leading filtration technology and digital scroll compression in Mikropor’s MK-DS dryers provides the ultimate energy efficiency solution for compressed air systems with varying levels of air demand."

"It is highly crucial to have clean and dry air in the system to have profitable and efficient manufacturing worldwide. Mikropor MMD-VP Series Modular Vacuum Purge Heatless Desiccant Air Dryers remove water vapor from compressed air, stop corrosion, and inhibit the growth of micro-organisms in critical applications. Mikropor MMD-VP Series Modular Vacuum Purge Heatless Desiccant Air Dryers supply high-quality dry air which has -40 °C dew point or optionally -70 °C dew point to the system with affordable prices and reliable way. In that way, the production machine has a longer life, minimum maintenance costs, and processed product is produced in a healthy and safe way. The new vacuum purge technology decreased air loss during the regeneration process and make the production more cost-efficient way."

"The light weight modular design desiccant dryer series brings a new concept in compressed air technology, offering total installation flexibility to meet specific needs. Mikropor’s Modular Desiccant Dryers are less than half the weight and size of a traditional twin tower design, allowing even the largest models to be easily moved through a standard doorway. Mikropor’s innovative Modular Air Dryers make it easier and more affordable than ever to deliver high-quality compressed air for virtually herever it’s needed. Mikropor Modular Desiccant Dryers have cosmetic beauty and can be located in clean, pleasant environments eyesore. Offered in sizes from 5 m³/h to 400 m³/h with dew point of -40°C to -70°C (optional) these dryers are equipped with everything you need, requiring only air inlet/outlet connections."

"What Mikropor offers you with MKE SERIES: - Low pressure drop saves compressor power - Quick start and reaction time provides additional production time - Every dryer is specially designed with the right components to consume the lowest energy - Highly energy efficient and environmentally friendly R134a refrigerant across all models. - R513a refrigerant is optional. - A state-of-the-art heat exchanger design provides the highest cost saving in the industry - Best in class refrigerant compressors consume less energy against competition dryers - Pressure switches control the condenser’s fan motor for saving energy and letting the system operate at desired conditions - This is not only a dryer, but an air treatment package that delivers an air quality of class 1.4.1 as per ISO 8573:2010 due to integrated filtration"

"Most compressor manufacturers do not use an aftercooler on their piston type compressors. Therefore compressed air exits the compressor at about 100°C temperature. Mikropor's High Temperature Dryer has an aftercooler to reduce the inlet temperature."

Mikropor MDA Heatless Desiccant Air Dryers provide constant -40⁰C (-70⁰C Optional) pressure dew point.These dryers are designed to supply clean and very dry compressed air for critical applications. Pre-filters and after-filters are standard on all Mikropor Heatless Air Dryers to keep the air stream clean and maintain the integrity of the desiccant medium. A very reliable electronic controller is utilised so the dryer operates perfectly through its service life. MDA Heatless Desiccant Dryers are equipped with special valves and high quality desiccants in order to assure performance and provide the lowest pressure drops available in the market.

AAF compressed air filters are designed for the protection of the downstream compressed air system and equipment with lower airflows against defects and other failures. They ensure high efficient removal of solid particles, water, oil aerosols, hydrocarbons, odour and vapours from compressed air systems up to 16 bar. Required compressed air quality according to standard ISO 8571-1 can be achieved with 5 different grades of filter elements (P, R, M, S and A). Optional internal and external condensate drains should be used for efficient condensate draining from the filter housing.< /br> <b>Features</b> <ul> <li>A wider range of different models for different flow rates, including larger 2” and 3” sizes. </li> <li>Convenient design for assembly of several filters and for wall mounting</li> <li>AVELOCK antivibration element lock system<li> <li>Needle felt drainage layer instead of foam for improved thermal resistance<li> <li>X2-COAT internal anti-corrosion protection<li> </ul>

BF HP filters are designed for protection of the downstream compressed air system and equipment against defects and other failures in high pressure applications. Due to their robust welded carbon steel construction, are used for installation in heavy industrial applications with high air flows.They ensure high efficient removal of solid particles, water, oil aerosols, hydrocarbons, odour and vapours from compressed air systems up to 25 bar. Required compressed air quality according to standard ISO 8571-1 can be achieved with 6 different grades of filter elements (B, P, R, M, S and A). Optional external condensate drains should be used for efficient condensate draining from filter housing. Fluid group 1 on request.

WFIT welded stainless steel filters with threaded connections are designed for protection of the downstream compressed air system and equipment against defects and other failures. They are used for filtration of compressed air as well as many other gasses where the risk for corrosion is very high or where stainless steel housing is required. To meet the required gas quality appropriate filter element must be installed into filter housing.Required compressed air quality according to standard ISO 8571-1 can be achieved with 8 different grades of filter elements (PI, PIW, PN, PP, PR, PM, PS and PA). Optional external condensate drains should be used for efficient condensate draining from filter housing. Fluid group 1 on request.

BF filters are designed for protection of the downstream compressed air system and equipment against defects and other failures. Due to their robust welded carbon steel construction, are used for installation in heavy industrial applications with high air flows.They ensure high efficient removal of solid particles, water, oil aerosols, hydrocarbons, odour and vapours from compressed air systems up to 16 bar. Required compressed air quality according to standard ISO 8571-1 can be achieved with 6 different grades of filter elements (B, P, R, M, S and A). Optional external condensate drains should be used for efficient condensate draining from filter housing. Fluid group 1 on request.

Air / Water Cooled HSC Series Water Cooling Industrial Chiller, Industrial Water Chiller, units are widely used in industrial plants such as steel and metallurgy, mining, cement, oil&gas, food, pharmaceutical, printing, machinery, energy, shipbuilding, marine, aviation, composite and defense industries.

VM Medium Type Units are designed for medium-duty industrial applications such as process cranes, operator cabins, shelters, containers in metallurgy, oil&gas, cement, energy, automotive, mining and port industries. The main features and advantages of this product are; plug & play compact design, less needs for erection services. The cooling, fan only, heating function modes are available while the filtering is always operating.

Poppe + Potthoff Maschinenbau GmbH supplies compressor units and pressure control systems of up to 400 bar for various gases. We offer ready-to-connect units to increase the existing pressure for pneumatic and hydraulic applications. In this way, the performance of existing systems can be increased flexibly and efficiently. Our compressor units are used wherever the existing system pressure is insufficient to implement specific applications. Of course, our systems are UL or CE compliant as required. In addition, we offer you service and support directly on-site.

Industrial evaporative air conditioners with axial fan from 10,080 to 19,080 m3/h ECO COOLER evaporative coolers are a natural cooling system that provide cool, humid air in the room to be heated. To cool the air, evaporative cooling technology is used, which consists of passing the outside air through panels moistened with water. As the air passes through this area, it cools and increases its humidity. The treated air is driven by a fan inside the room and by renewing the indoor air comfort temperatures are reached. The necessary electrical power is 80% less than traditional air conditioning systems and by using water as a cooling element it avoids the emission of harmful gases into the environment. ECO COOLER evaporative air conditioners have a 16-speed axial fan to adjust the necessary air flow at all times, they also have an electronic control in charge of performing all the equipment′s functions.

AD BIGGER PREMIUM evaporative air conditioners for evaporative air conditioning in industrial, commercial, agricultural or livestock premises Evaporative coolers are a natural cooling system that uses water as a cooling element. Its basic operating principle is to suck in the outside air and pass it through some cooling panels moistened with water. Once the air passes through this panel, it cools and increases its humidity. Once this process has been carried out, the air is propelled inside the premises to be air-conditioned and, based on the appropriate renovations and extraction of air, a comfortable comfort temperature and adequate indoor air quality are achieved for people. The AD BIGGER PREMIUM evaporative air conditioners, develop an air flow from 46,922 m3/h to 60,644 m3/h with an available pressure at a maximum flow of 100 Pa, its cooling capacity is suitable for premises from 750m2 to 1,100m2. For larger surfaces more units can be installed.

Safe blowing off of dust particles on work clothes by means of controlled compressed air in 30 seconds

- Made of polyamide (PA) - Color black (red, blue, green, yellow, natural, brown, orange and grey: specify when placing order; subject to extra charge) - External calibration; for use with Eisele plug connectors - Temperature range -76 to 212 °F (-60 to +100 °C) - Suitable for vacuum - Free of PWIS and halogen - Suitable for fuel - For automotive industry according to DIN 73378 - Drag chain compliant

Fresco hygienic air cleaning and disinfection device removes all kinds of bacteria, including corona, microbes, airborne pathogens, bad odors and other pollutants, in the air by periodically producing active oxygen and evaporating and spraying into the room in order to maintain indoor air quality during its operation. With ozone disinfection technology, it inactivates viruses by penetrating cellularly. TECHNICIAL SPECIFICATIONS Working Voltage: 12 Volt Ozonation Capacity: 200 mg/h Power Consumption: 8 Watts Display: 0.96 Inch Oled Body: Metal Operating Temperature: -33, +55 Degrees Celsius Feed Gas: Ambient Air Dimensions: 182.5 x 172.5 x 53 mm Weight: 2 Kg Extra Features Possibility to use in vehicle disinfection, Possibility of disinfection of fruits, vegetables, meat, fish in the kitchen Screw holes for wall hanger, 3M adhesive hook and loop tape for wall hanger, Ozone discharge holes made of stainless steel, long life corona discharge ozone generator, and so on..

1200i PRO is a Medical Grade Air Purifier with a Clean Air Delivery Rate of 1200 m3/h. 1200i PRO combines the most advanced 4-stage filtration technology currently available on the market. Medical-grade H13 HEPA NANO filters remove 99.97% of malicious particles from the air providing safe environments for both business and leisure. High efficiency in killing viruses (ie. Coronavirus) and bacteria, effective in removing unpleasant odours are ensured by the implementation of multiple filtering systems. 1200i PRO is an outstanding air purifier designed entirely for the comfort and health of you, your customers, your patients and your employees.

iTherapy Eco is intended for food industry, food storage, food transport, etc. It prolongs the freshness of fruits, vegetables, bread and other food. Reduces bacteria exposure, fungus spores, reduces absorption of toxic chemicals, maintains stabile levels of co2 etc.

720i EDGE is a Medical Grade Air Purifier with a Clean Air Delivery Rate of 720 m3/h. 720i EDGE combines the most advanced 5-stage filtration technology currently available on the market. Medical-grade H13 HEPA NANO filters remove 99.97% of malicious particles from the air providing safe environments for both business and leisure. High efficiency in killing viruses (ie. Coronavirus) and bacteria, effective in removing unpleasant odours are ensured by the implementation of multiple filtering systems. 720i EDGE is an outstanding air purifier designed entirely for the comfort and health of you, your customers, your patients and your employees.

The active FE SYSTEM electrostatic filters are unique in their energy efficiency and the ability to kill off harmful particles (as opposed to only collecting the particles). Due to the standard size of the FE SYSYEM, it can be retrofitted into existing. Used in ventilation systems, particularly in the air-conditioning sector, does not require changes in the construction and dimensional characteristics of the plant. Energy savings: The FE SYSTEM has been given an A+ rated energy rating (Eurovent), (compared to a C energy rating for traditional pocket filter) and is certified to the highest standards of air quality - ISO 16890 and many more. This improved energy efficiency has yielded up 30% electricity savings. Cutting-edge technology that creates systems that offer the highest level of air filtration and air quality and significantly reduce energy consumption through the use of components that provide world-class, certified efficiency levels and eliminate disposal of used filters.

Diffusion device for dry nebulization of disinfectants. Converts the liquid disinfectant into a dry mist without leaving any residue. Nebulization through the Venturi effect Broad-spectrum of activity Uniform distribution of the particles in the room Slow and even precipitation ensures comprehensive, reliable disinfection Can also be used when there are electronic devices in the room Suitable for all surfaces Even hard-to-reach objects such as B. cables are reliably disinfected Room volume adjustable from 10 to 1000m³ Automatic shutdown after the disinfection process is complete No pre or post-treatment of the room necessary