Fire protection equipment and materials - Import export

Fipron-Cord — innovative independent fire extinguishing mean compound of composite materials. It represents a mix of microcapsules with an inner heating agent. When exposed to fire, a heating agent in a cord enables followed by a chemical reaction through the whole length of cord. Such reaction comes with heat impact that leads to explosion of all microcapsules and release fire heating substance. Fipron Cord product can be installed together with a high voltage electric cable in closed cable ducts located both indoors and outdoors with an operating temperature from minus 50 ° C to plus 80 ° C.

Intufit® strips prevent cold-hot smoke from spreading when they reach a specified temperature during the fire. As Intufit® strips expand 20 times larger than their initial shape during a fire, they provide fire retardant properties. As a result of the self-adhesive applied on steel fire-resistant doors.

Body: ASTM B-536 Nylon- 11 Coated / Gear Box: ASTM A-536 / Disc: ASTM B-356 EPDM Encapsulated / O-Ring: EPDM / Handwheel: ASTM A-536 / ** Connection Type: Flanged or Grooved or Threaded / Working Pressure: 300 PSI ( 20,6 Bar ) / Working Temp.: -10ºC , +120ºC / Working Test Pressure: 600 PSI (61,8 Bar) *** It is identified as a local control valve. It is used as a shut-off valve on water feed lines to disconnect (control) in-situ zones. A butterfly valve or rising stem valve is used to shut off or control. the position of all valvesused in fire systems should be visible and electrically traceable. Butterfly valves are of a gearbox handwheel type. The supervisory switch of a butterfly valve are located inside the valve and there is an on/off indicator on it. **** Application Areas:Residences / Hotels / Hospitals / Business Centers / Shopping Centers

Body: Ductile Iron / Stem,Springs: Stainless Steel / Disc: Brass or Aluminium or Bronze / Disc gasket or Disc washer : EPDM / ** Connection Type: Flanged or Grooved / Working Pressure: 300 PSI ( 20,6 Bar ) / Working Temp.: -10ºC , +120ºC / Working Test Pressure: 600 PSI (61,8 Bar) *** The wet alarm valve is designed for applications where the water is unlikely to freeze. The water staying pressurized in the pipes is released over the fire area after the sprinkler is activated due to fire. The pressurized water system is not only feed contionuously, but also fills in the retard chamber. After the chamber is filled, the pressure switch on the chamber is actuated. The pressure switch sends the alarm information to the fire warning system or the automation system. After the pressure switch is actuated, the water is delivered to the water-motor gong and releases a mechanical alarm.

FINFIRE is new generation fire extinguishers. FINFIRE "TAB" - autonomous powder fire extinguishing device to extinguish without human intervention fires of solid, liquid and gaseous substances, as well as electrical equipment under voltage: A, B, C, E classes. FINFIRE "TAB” is used in warehouse, technological, household premises, garages, apartments, shops, vehicles, and other places. Used as portable fire extinguishers or in addition to them. Extremely simplified design does not require special skills and great physical effort which helps to significantly save time in critical situations. The devices consist of a polystyrene body filled with fire extinguishing powder. Fire-conducting cords run along the edges of the body. The cords will activate the device upon contact with fire. Within 10 seconds after triggering, a pop is heard (additional warning signal). At the same time, the housing ruptures and the extinguishing powder is ejected.

Aerosol generator “MAG” is intended to extinguish fire of A,B,C and E classes in enclosed spaces. The extinguishing agent is safe for human and doesn’t require people evacuation. The fire extinguishing occurs due to a chemical reaction therefore interfering in combustion process with no oxygen isolation. The actuation of the generator occurs by means of linear heat detection under given temperature (short circuit of electric buttery takes place) or by means of Fipron-Cord when placed in the seat of fire.

Autonomous fire extinguishing system Hyperbola is designed to extinguish without human intervention class A, B fires and electrical equipment under voltage in objects of protection of small volume from 0.03 to 2.2 m3, located in rooms with operating temperatures from minus 40 ° С to plus 60 ° С and relative air humidity up to 98 percent at a temperature of + 25 ° С. The product is a sealed tube made of a special polymer material filled with a liquid extinguishing agent (GFFS) - a liquefied mixture based on organofluorine substances, sealed at both ends. The unit has overpressure inside the housing. The polymer material provides reliable storage of the extinguishing agent and its release under strictly defined conditions.

Test and Drainage Valves / Body: Brass ( Forged ) / Ball : Brass / Gasket : PTFE ** Connection Type: Threaded or Grooved / Working Pressure: 300 PSI ( 20,6 Bar ) / Working Temp.: -10ºC , +120ºC / Working Test Pressure: 600 PSI (61,8 Bar) *** In sprinkler systems, these valves are used for the testing systems and drain the unnecessary fluids from the systems. Advantages: They have sight glasses in their body,single valve is sufficient to drain the line. For choosing the test and drain valves, users should pay attention to line diameter. Also these valves have to have same diameter with the sprinkler orifice diameter. **** Application areas: The system where has sprinkler systems.

Connection Type: U bolt or Threaded / Working Pressure: 400 - 450 PSI / Working Temp.: 0ºC , +49ºC. ** In wet pipe systems, generally pedal type water alarm switches are used for informing users 4-10 gpm water flow has started. Water flow switches are used in Aqueous and foam fire extinguishing systems. They are used in only wet pipe systems. Because of the dry contact feature it appears on the control panel. Flow switches are suitable for the using in indoor and outdoor. *** Application area: All wet pipe lines

Specifications: - capacity up to 3000-8000 m3/hour - water consumption 0.3-0.5 1/s - pressure up to 100 atm. Execution: chassis, container, marine Application: - the fighting - localization of emissions - protection against thermal radiation - cleaning surfaces from contamination - fighting forest fires - deposition of smoke and toxic chemicals - elimination of icing - vapor-drip curtain - provision of temporary or emergency heat supply of residential buildings - sanitization (including Covid-19)

PiroStiker based on microencapsulation technology. PiroStiker contains inside dozens of thousands of microcapsules filled with fire extinguishing agent which enables if reached the determinate temperature and fire occurrence takes place. In case of fire, the microcapsule explodes discharging the extinguishing gas, which displace oxygen, chill the surface and suppress fire. Fire extinguishing agent is ecologically safe, it doesn’t cause harm to human’s health and doesn’t damage equipment.