Environmental clean-up - machines and equipment - Import export

BORSIG offers emission control membrane technology for terminals and refineries, marine loading and petrol stations. Our products are: BORSIG Vapour Recovery Units (VRU), BORSIG Aromatic Recovery Units, BORSIG Carbon Retrofit Units, BORSIG Marine Vapour Recovery Units, BORSIG Dock Safety Units, BORSIG Vent Recovery Units

For the abandonment of Offshore structures special legal requirements apply. Tubes have to be deconstructed under the seabed. This requires special technologies. Our Downhole Cutting Heads (DCHs) can be inserted into tubes and casings over an umbilical from the working platform. Arriving at the destination they clamp in the tubes and perform a 360 degrees cut which severs the tube underneath the seabed. The DCH is pulled out and afterwards the pulling of the tube is possible. Cuttings can be performed up to 150 m (500 ft) deep and pipe sizes between 7” and 72” diameter, whereby the wall thickness can be up to 20” thick. For every requirement we offer the appropriate DCH. By extensions nearly every kind of pipe/tubing/casing can be cut.

With the MiJET part cleaning system it is possible to keep workplaces clean and workpieces hygienically cleaned with the simplest technology. An electrical connection is not necessary. Only a compressed air connection is required to use the device. Application The actual task of the MiJET is to filter oily air. Chips of the work pieces accumulate in the container. Operators often tend to blow off finished workpieces into the machine. This quickly results in dirty working environments and poor air in the production hall. However, we avoid this by exhausting these fumes. Oils are trapped from the exhaust air and chips and coolants accumulate in the container.

With the MiJET part cleaning system it is possible to keep workplaces clean and workpieces hygienically cleaned with the simplest technology. An electrical connection is not necessary. Only a compressed air connection is required to use the device. Application The actual task of the MiJET is to filter oily air. Chips of the work pieces accumulate in the container. Operators often tend to blow off finished workpieces into the machine. This quickly results in dirty working environments and poor air in the production hall. However, we avoid this by exhausting these fumes. Oils are trapped from the exhaust air and chips and coolants accumulate in the container.

The cleaning station MiJET Wash Station with integrated cleaning basin ensures clean workplaces and oil-free cleaned workpieces. No electrical connection is required for this. Only a compressed air connection is required. Application The washing station consists of a worktable, in which a wash basin with nozzle and a MiJET are installed. The washbasin serves as a pre-cleaning unit, the MiJET then removes excess cleaning agents from the workpieces. Ideally, the washing station is useful for heavily oiled workpieces as well as for scratch-sensitive parts. The advantage for easy blowing off of the parts is that oil mist formation is prevented and thus the health of the operator is not endangered. In addition, the working environment remains free of oil.

he cleaning station MiJET Wash Station with integrated cleaning basin ensures clean workplaces and oil-free cleaned workpieces. No electrical connection is required for this. Only a compressed air connection is required. Application The washing station consists of a worktable, in which a wash basin with nozzle and a MiJET are installed. The washbasin serves as a pre-cleaning unit, the MiJET then removes excess cleaning agent from the workpieces. Ideally, the washing station is useful for heavily oiled workpieces as well as for scratch-sensitive parts. The advantage for easy blowing off of the parts is that oil mist formation is prevented and thus the health of the operator is not endangered. In addition, the working environment remains free of oil.