Machine manufacturing - Import export

Lubrication of valve seals, collars, O-rings, drives, piston rods and guides Lubrication of slides, slat-band and roller chains Lubrication of cutting knives as well as of needles and lifters of knitting machines Dismantling of rusted-in parts and removal of oil and greasy soiling Advantages and benefits NSF H1 registered Highly effective due to good creep properties Broad range of uses Displaces water Duolabel Clean the surfaces for optimal effect. Apply OKS 370 with a brush, drip oiler or by immersion or using a suitable automatic lubrication system locations to be lubricated. Spray on evenly OKS 371 spray. Avoid excesses. In as far as available, observe the machine manufacturer's instructions. Assess the lubrication frequency and quantity on the basis of the service conditions. Caution: Only mix with suitable lubricants.

Lubrication of normal-load friction, rolling and pivoting bearings Lubrication of spindles and guides at machines Lubrication of moving parts at fine-mechanical devices as well as household appliances Advantages and benefits Lubrication when dark-coloured lubricants cannot be used Saving of maintenance and lubricant costs by reducing downtimes and corrective maintenance Waterproof Clean the lubricating points well for optimal effect. Before filling for first time, remove anti-corrosion agent. Fill the bearing such that all functional surfaces are certain of being greased. Fill normal bearings up to about 1/3 of the free space inside the bearing. Low-speed bearings (DN value below 50,000) and their housings should be filled completely. In as far as available, the bearing and machine manufacturer's instructions should be observed.

Electrical cabinets contain the electrical and electronic components of a process engineering system, a machine tool, or production equipment that is not directly located in the machine. They are manufactured by special switch cabinet builders or by the machine manufacturers themselves. To save costs, there are automation solutions that are not only worthwhile for large production series, but are also suitable for the more efficient and economical production of individual and small series. Metzner offers a unique and comprehensive system solution to reduce your expenses in switchgear construction. Depending on your requirements, different stripping and crimping machines are available, which differ in terms of design, performance and degree of automation. METZNER TRIATHLON SERIES - for precise cutting to length and one- or two-sided stripping - for crimping the ferrules (single- and double-sided) - for individual labelling of strands with different printing method

Specifications: Stroke rate: max. 220 1/min. (cylindrical, straight bushes), max. 160 1/min. (flanged bushes, collar bushes) Press: nominal stamping capacity 100 kN, stroke 12 mm Slide units: nominal forming capacity 50 kN, stroke 50 mm Bushing inner diameter: 15 mm - 40 mm Bushing length: max. 50 mm Material: strip thickness: max. 2 mm, strip width: max. 50 mm Dimensions: width 3,140 mm x depth 1,895 mm x height 2,030 mm Weight: approx. 4,800 kg

Specifications: Stroke rate: max. 400 1/min. (cylindrical, straight bushes), max. 250 1/min. (flanged bushes, collar bushes) Press: nominal stamping capacity 70 kN, stroke 12 mm Slide units: nominal forming capacity 30 kN, stroke 25 mm Bushing inner diameter: 6 mm - 18 mm Bushing length: max. 40 mm Dimensions: width 2,020 mm x depth 1,330 mm x height 2,030 mm Weight: approx. 3,000 kg

In close cooperation with machine manufacturers from all over the world, thodacon GmbH develops, manufactures and improves telescopic steel covers for all requirements, suitable for a wide range of different machine tools. Whether horizontal, vertical, oblique or transversal - there is no installation situation for which there is no optimum thodacon cover. Difficult guidance geometries or unfavorable space conditions in special machines are solved by individual constructions. The covers impress with their robustness and reliability.