Part cleaning - Import export

With the MiJET part cleaning system it is possible to keep workplaces clean and workpieces hygienically cleaned with the simplest technology. An electrical connection is not necessary. Only a compressed air connection is required to use the device. Application The actual task of the MiJET is to filter oily air. Chips of the work pieces accumulate in the container. Operators often tend to blow off finished workpieces into the machine. This quickly results in dirty working environments and poor air in the production hall. However, we avoid this by exhausting these fumes. Oils are trapped from the exhaust air and chips and coolants accumulate in the container.

With the MiJET part cleaning system it is possible to keep workplaces clean and workpieces hygienically cleaned with the simplest technology. An electrical connection is not necessary. Only a compressed air connection is required to use the device. Application The actual task of the MiJET is to filter oily air. Chips of the work pieces accumulate in the container. Operators often tend to blow off finished workpieces into the machine. This quickly results in dirty working environments and poor air in the production hall. However, we avoid this by exhausting these fumes. Oils are trapped from the exhaust air and chips and coolants accumulate in the container.

Customized MiJET AC filter for model 30.5 cm Suitable for MiJET 30.5 cm and washing station with MiJET 30.5 cm We have developed the MiJET filter to be able to use it in addition to the oil mist filter. The activated carbon filter is put over the existing air filter. It is fastened with three locking hooks. These keep the active carbon filter in position. The activated carbon filter cannot be used individually. The AC filter helps the user to filter aerosols from the exhaust air. These are increasingly produced by the use of cleaning solutions. MiJET products can be purchased via our Shop.

Custom MiJET activated carbon filter for model 20.3 cm Suitable for MiJET 20.3 cm and washing station with MiJET 20.3 cm We have developed the MiJET filter to be able to use it in addition to the oil mist filter. The activated carbon filter is put over the existing air filter. It is fastened with three locking hooks. These keep the ACF in position. This Filter cannot be used individually. The AC filter helps the user to filter aerosols from the exhaust air. These are increasingly produced by the use of cleaning solutions. MiJET products can be purchased via our Shop.

he cleaning station MiJET Wash Station with integrated cleaning basin ensures clean workplaces and oil-free cleaned workpieces. No electrical connection is required for this. Only a compressed air connection is required. Application The washing station consists of a worktable, in which a wash basin with nozzle and a MiJET are installed. The washbasin serves as a pre-cleaning unit, the MiJET then removes excess cleaning agent from the workpieces. Ideally, the washing station is useful for heavily oiled workpieces as well as for scratch-sensitive parts. The advantage for easy blowing off of the parts is that oil mist formation is prevented and thus the health of the operator is not endangered. In addition, the working environment remains free of oil.

The cleaning station MiJET Wash Station with integrated cleaning basin ensures clean workplaces and oil-free cleaned workpieces. No electrical connection is required for this. Only a compressed air connection is required. Application The washing station consists of a worktable, in which a wash basin with nozzle and a MiJET are installed. The washbasin serves as a pre-cleaning unit, the MiJET then removes excess cleaning agents from the workpieces. Ideally, the washing station is useful for heavily oiled workpieces as well as for scratch-sensitive parts. The advantage for easy blowing off of the parts is that oil mist formation is prevented and thus the health of the operator is not endangered. In addition, the working environment remains free of oil.

The ROTIMAT 3U is a universal machine for the cleaning of a wide range of parts. It guarantees maximum technical cleanliness, irrespective of the degree of contamination of the parts. It is equipped with two baths for cleaning, and subsequent iron phosphatising/rinsing, wherby each bath has its own pump cycle. The ROTIMAT 3U can be operated with standard baskets or customised parts carriers. Cleaning with aqueous media (acidic, neutral or alkaline) 660 x 480 x 300 mm 4 x 480 x 320 x 200 mm Spray cleaning for extra demanding applications Catering for wide range of parts Suitable for any cleanliness level from light dirt removal to high technical cleanliness Available as 2bath unit with loading of the unit via Manual loading table Manual charging unit Automatic charging unit

After cleaning, parts are normally dried. Efficient drying keeps cleaning medium consumption low, and thus helps protect the environment. In addition, drying effectively prevents recontamination and corrosion. When drying tightly packed or porous parts, drying at atmospheric pressure might not be effective, so that drying under vacuum is the only option.

The parts are immersed in the wet medium. Dirt is dissolved from the surface by the heated wet medium. By moving the parts while immersed, cleaning is assisted by a mechanical effect. In industrial parts cleaning, the surfaces are then normally rinsed and dried.

The wet medium is sprayed through nozzles onto the surfaces of the parts. Particles are removed from the parts by kinetic energy, and then washed away. The cleaning result is primarily determined by the position and shape of the nozzles, the spray pressure and the volume of media applied to the parts. In industrial parts cleaning, the surfaces are then normally rinsed and dried.

The R0 has been specifically designed for intermediate and final cleaning of small and extra small parts. Thanks to its universal process technology, the R0 offers operators unrivalled cleaning performance in an extra compact machine. The R0 can be transported through door clearances of as little as 1,000 x 2,000 mm. Depending on the model, the cleaning unit can be loaded from the long or from the short side. Cleaning with hydrocarbons or modified alcohols with a flash point > 55°C; halogenated hydrocarbons; other solvents on request Available as UNIVERSAL unit Top quality cleaning in compact unit Short cycle times High throughput Available as 1 and 2bath unit with loading of the unit via Manual charging unit Automatic charging unit

Mobile on floor or in the pit, mounted on a trolley. Grey reinforced fibre glass collector with automatic dirt water recycling incl. drip-off grid with slosh bafflet. Load capacity 80l

Mobile on floor or in the pit, mounted on a trolley. Grey reinforced fibre glass collector with drip-off grid without recycling unit. Load capacity 80l

A professional, payable cleaning and defatting we offer for specially produced Stamping parts Drawing parts Extruded components Turned parts Milled parts Products from electrical engineering and fine mechanics Parts from (electric) motor production Heat exchanging devices An optimal cleanliness of the elements has found its way to become an important quality characteristic. By our professional procedure of cleaning parts your stamping parts will be optimally defatted and residue-free dried. We are sure, that you will love the clean final products. Our cleaning plant is an up-to-date version and works in vacuo with DOWCLENE 1601 (based on modifies alcohol). The pros lower toxicity residue-free drying, non-detergent

Service Cleaning: Our customers count on our contract cleaning team for their daily cleaning needs -. With modern cleaning processes e.g. thermal with pyrolysis, aqueous with ultrasonic or mechanical with lapping blasting we can clean and improve your high quality tools. Whether extrusion or injection molding tools, extruder screws, hot runners, nozzles, filters, molds, screens, adhesive or coating devices - everything will be cleaned by us for you! Detailed advice and documented cleaning of samples ensure consistent results over a long period of time. Test us - In addition to comprehensive advice, we offer you the opportunity to carry out your own cleaning trials of workpieces up to a length of 3 m and / or 4 t in weight. Cleaning trials: Every customer can convince himself of our offer by a free sample cleaning. Whether cleaning, surface treatment or decoating - with us you as a customer can see the result even before the first order!

Fast delivery of spare and wear parts We have a modern shelf stock of all common wear and spare parts. The delivery guarantee from our own stock is a matter of course for us - as well as for older machines and third-party products. ▪ Blasting gloves/sandblasting gloves ▪ Blasting nozzles/sandblasting nozzles ▪ Clamps ▪ Vent valves ▪ Laminated glass panes ▪ Profile seals ▪ Illumination panes ▪ Filter cartridges ▪ Replacement diaphragms ▪ Sealing rings ▪ Nozzle holder ▪ Blasting hoses/sandblasting hoses ▪ Door seals ▪ Air nozzles ▪ Check valves ▪ Sinter filters ▪ Metering rings ▪ baffle discs and much more.

The WIWOX® VERSA GENIUS+ ultrasonic cleaning system enables individual, demand-oriented mould and parts cleaning. The modular design allows adaptation to almost all process requirements. Later expansion or automation is possible at any time. WIWOX® VERSA GENIUS+ ultrasonic cleaning systems consist of washing, jet, rinsing and drying modules as well as the corresponding accessories. The spectrum ranges from individually operated cleaning basins to fully automated, multi-stage cleaning lines. WIWOX® VERSA GENIUS+ sets new standards in modern plant design. Well thought-out details in the area of guiding the cleaning medium, agitation and process control ensure a flexible and energy-efficient process sequence that meets the requirements. You can convince yourself of the economic efficiency of the system by extensive cleaning tests in our test laboratory. The bath care accessories also play an important role in the cleaning result, the uniform process flow and the operating costs.

integrated QM-system clean parts 100 % visual verification

WIWOX® Spintec top loader spray chamber washing systems are the solution for fast parts cleaning in maintenance! The parts to be cleaned are placed in the washing basket of the system from above. During the washing process, cleaning fluid is sprayed onto the parts from below, above and from the sides. The basket rotates inside the machine, resulting in an even washing result. The detergent reservoir is located in the bottom of the machine and is also equipped with a heater.

Doubly well-rounded: The Skinner ASP 560 D is an open derinding and defatting machine for round cuts, such as ham, shoulder and haunch. Advantages Clean and fast removal of rind and simultaneous removalof shoulder fat Perfect collection of rind and fat Variable adjustment of the rind and cutting thicknessfor fat removal Two workflows in one machine Toolless removal and assembly of all parts to be cleaned Modern, hygienic design Ergonomic machine design Integrated crate shelf Space-saving Options: Application-specific table for ham/shoulder without bone Extended discharge table Special tension rollers

ViscoTec 1C dispenser vipro-PUMP ▪ Volumetric dispensing, regardless of viscosity ▪ For low to high viscosity materials ▪ Particularly suitable for highly abrasive, filled or shear sensitive materials ▪ Modular scalability of volume flow within the model range ▪ Programmable suck-back prevents dripping or stringing of product ▪ Material entry with Tri-Clamp DN 20 connection for optimized material flow and fast coupling of material supply ▪ Locking ring for easy and fast disassembling of drive unit ▪ Drive unit connection with optimized power transmission free from clearance ▪ Optimized dispenser bracket for easy adjustable mounting ▪ Long lifetime due to low wear ▪ Different rotor and stator materials available ▪ Continuous dosing, pulsation free ▪ Interior non-stick coated ▪ Dividable rotor assembly for easy & fast replacement and low spare part costs ▪ Easy cleaning and maintenance due to quick assembly and disassembly options

The Paca Component Cleaner is a professional, fast cleaner. Versatile and effective, it is universally usable and largely biodegradable. It removes oil and grease, hardened residues and brake fluid. It degreases glued surfaces and sealing surfaces, cleans com- ponents efficiently and safely, dries quickly and leaves no residue. CO2 propellant AOX-free Fields of application The automotive industry, construction machinery, agricultural machinery, tools, sport, hobbies, home and garden, office Usage Check the rubber and plastic parts for compatibility beforehand, as Paca Component Cleaner may cause lacquers to corrode. Spray Paca Component Cleaner at close range onto the part which needs cleaning, repeating this step if there is excessive contamination. Allow the solution to dry, then wipe over with a clean cloth. Always shake Component Cleaner well before use! Batch quantity/Packaging units Batch quantity: 150ml and 500ml spray cans Packaging units: 24 150ml cans or 12 500ml...

The Drum pump F/FP 427 is ideal for hygienic applications and suitable for conveying media out of drums, IBCs and other containers. It can be easily and quickly disassembled for cleaning / sterilization and can be completely stripped down to individual parts. The pump has minimal dead spots. The drive shaft, the inner and the outer tube are made of stainless steel (316 Ti resp. 1.4581). The pump is also available as FOOD and 3A certified version and complies with international safety standards. Benefits: - Ideal as hygienic pump - Can be quickly and easily taken apart for cleaning - All parts in contact with the medium can be sterilized - Transfers also fluids containing solids such as juices with pulp or soups with spices - Available with different connection at the pressure side (e.g. Clamp 1 1/2" or RD 58x1/6) - Available with 3A Certificate - Available as FOOD version - Appropriate for food contact acc. to EC 1935/2004 and FDA CFR 21

"Origin of Hemp Hemp seed (sativa) is native to Central Asia, but has now spread to Europe, China and the rest of the world. Hemp can be grown in almost every ecosystem in the world, making it possible to grow hemp all over the world. Together with bamboo, hemp is one of the fastest growing plants on earth. It was also one of the first plants to be spun into usable fibers. Selection process of Hemp Seeds Whole After harvesting, the hemp seeds are selected and cleaned to remove parts that are not desired. After this process, the seeds are dried in air dryers. This ensures that there are whole hemp seeds remain, which can be packaged. Healthy Features of Hemp Seeds Hemp seeds can be eaten raw and then contain the necessary healthy characteristics for a healthy diet. Hemp seeds contain omega-3 and omega-6 fatty acids. In addition, hemp seeds are rich in protein."

Pre-assembled pump kit for food and pharma. The pump-kit is ideal for hygienic applications and suitable for conveying media out of drums, IBCs and other containers. It can be easily and quickly disassembled for cleaning / sterilization and can be completely stripped down to individual parts. Comprising drum pump FP 427 FOOD, outer tube stainless steel 1000 or 1200 mm, commutator motor F 458, hose, hand nozzle, hose connection and compression gland. Product attributes: - Sealless in the liquid area - Minimal dead spots - Can be taken apart completely in only a few steps - Disassembly almost without tools possible Benefits: - Ideal as hygienic pump - Can be quickly and easily taken apart for cleaning - All parts in contact with the medium can be sterilized - Transfers also fluids containing solids such as juices with pulp or soups with spices - Appropriate for food contact acc. to EC 1935/2004 and FDA CFR 21 - Also available for the ex-area with drum pump FP 430 Ex FOOD

GLP - Peumatic top-entry agitator The GLP is a pneumatic top-entry series agitator that is used for homogenizing, dispersing, emulsifying and suspending in vessels and for viscosities up to 500 mPas for instance in wastewater treatment, chemical and cosmetics as well as in food industries. The agitator speed adapts to the viscosity of the media being mixed. Compact and easy-to-maintain construction as well as low weight. Power transmission via elastic coupling in the bearing housing. The agitator shaft has a double bearing in an aluminum housing separated from the drive. Speed is sensitively and continuously adjustable, smooth start, insensitive to vapor, dust and smoke. Compressed air keeps all moving parts clean. Insensitive to heat, suitable for high ambient temperatures. Compressed air, expanding in the air engine cools the agitator drive. Includes filters, pressure reducers with pressure gauge that indicates the secondary pressure. Available with a vessel clamp to fix the...

GRP - Pneumatic agitator GRP – pneumatic agitator The GRP is a pneumatic agitator equipped with either a helical geared drive or a worm geared drive. It is used for homogenizing, dispersing, emulsifying and suspending of low- and medium viscosity materials in small containers. The agitator shaft is directly mounted on the shaft journal. Elastic operation, in other words: The speed of the agitator adapts to the viscosity of the media being mixed. Compact and easy-to-maintain construction as well as low weight allows an easy handling. ((Infotexte)) Speed is sensitively and continuously adjustable, smooth start, insensitive to vapor, dust and smoke. Compressed air keeps all moving parts clean. Insensitive to heat, suitable for high ambient temperatures. Compressed air expanding in the air engine cools the agitator drive. The pneumatic agitators are explosion proof and overload proof until standstill. Type test certificate for explosive zone 0. The GRP is a pneumatic agitator...

The GLP is a pneumatic top-entry series agitator that is used for homogenizing, dispersing, emulsifying and suspending in vessels and for viscosities up to 500 mPas for instance in wastewater treatment, chemical and cosmetics as well as in food industries. The agitator speed adapts to the viscosity of the media being mixed. Compact and easy-to-maintain construction as well as low weight. Power transmission via elastic coupling in the bearing housing. The agitator shaft has a double bearing in an aluminum housing separated from the drive. Speed is sensitively and continuously adjustable, smooth start, insensitive to vapor, dust and smoke. Compressed air keeps all moving parts clean. Insensitive to heat, suitable for high ambient temperatures. Compressed air, expanding in the air engine cools the agitator drive. Includes filters, pressure reducers with pressure gauge that indicates the secondary pressure. Available with a vessel clamp to fix the GLP on a drum.