Results for
Germany
Form: sheet Material: 1.4301 (X5CrNi18-10) Manufacturing method: cold-rolled, 2R Surface finish: bright annealed Norm: EN 10088-1-2-3 eClass 9.1: 35010511 UNSPSC 11.2: 30102505 Dimensions: Thickness (mm): 0.5 - 3 Length (mm): 2,000 - 3,000 Width (mm): 1,000 - 1,500 Factory filming: Standard film, no film, laser protection film
Request for a quoteGermany
Form: sheet Material: 1.4828 (X15CrNiSi20-12) Manufacturing method: hot-rolled, 1D Surface finish: pickled Norm: EN 10095 eClass 9.1: 35010511 UNSPSC 11.2: 30102505 Dimensions: Gauge (mm): 4 - 15 Length (mm): 2,000 - 3,000 Width (mm): 1,000 - 1,500
Request for a quoteGermany
Stainless steel Form: sheet Material: 1.4404 (X2CrNiMo17-12-2) Manufacturing method: cold-rolled, 2J Surface finish: brushed Ground sites: on one side Norm: EN 10088-2 eClass 9.1: 35010511 UNSPSC 11.2: 30102505 Dimensions: Gauge (mm): 1.5 - 2 Length (mm): 2,000 - 3,000 Width (mm): 1,000 - 1,500
Request for a quoteGermany
Shape: sheet Material: 1.4301 (X5CrNi18-10) Type of production: cold-rolled, 2G Surface finish: ground Grain: 240 Ground sides: both sides Standard: EN 10088-2 eClass 9.1: 35010511 UNSPSC 11.2: 30102505 Dimensions: Thickness (mm): 1.5 - 5 Length (mm): 2,000 - 3,000 Width (mm): 1,000 - 1,500 Foliation: Foil 4228, laser protection foil
Request for a quoteGermany
Form: sheet Material: 1.4571 (X6CrNiMoTi17-12-2) Manufacturing method: cold-rolled, 2B Surface finish: pickled Norm: EN 10088-2 eClass 9.1: 35010511 UNSPSC 11.2: 30102505 Dimensions: Thickness (mm): 0.5 - 6 Length (mm): 2,000 - 4,000 Width (mm): 1,000 - 2,000
Request for a quoteGermany
Form: sheet Material: 1.4541 (X6CrNiTi18-10) Manufacturing method: hot-rolled, 1D Surface finish: pickled Norm: EN 10088-2 eClass 9.1: 35010511 UNSPSC 11.2: 30102505 Dimensions: Gauge (mm): 3 - 12 Length (mm): 2,000 - 3,000 Width (mm): 1,000 - 1,500
Request for a quoteGermany
Form: sheet Material: 1.4404 (X2CrNiMo17-12-2) Manufacturing method: cold-rolled, 2B Surface finish: pickled Norm: EN 10088 eClass 9.1: 35010511 UNSPSC 11.2: 30102505 Dimensions: Gauge (mm): 0.8 - 6 Length (mm): 2,000 - 4,000 Width (mm): 1,000 - 2,000
Request for a quoteGermany
Shape: sheet Material: 1.4462 (X2CrNiMoN22-5-3) Method of manufacture: hot-rolled, 1D Surface finish: pickled Standard: EN 10088-2 eClass 9.1: 35010511 UNSPSC 11.2: 30102505 Dimensions: Thickness (mm): 4 - 10 Length (mm): 2,000 - 3,000 Width (mm): 1,000 - 1,500
Request for a quoteGermany
Form: sheet Material: 1.4301 (X5CrNi18-10) Manufacturing method: cold-rolled, 2B Surface finish: pickled Norm: EN 10088-2 Dimensions: Thickness (mm): 0.4 - 8 Length (mm): 2,000 - 6,000 Width (mm): 1,000 - 2,000 Foliation: Foil 4228, no foil, laser protection foil, no paper
Request for a quoteGermany
Shape: sheet Material: 1.4016 (X6Cr17) Type of manufacture: cold-rolled, 2J Surface finish: brushed Ground side(s) one-sided Laminated page(s): one-sided Standard: EN 10088-2 Dimensions: Thickness (mm): 0.8 Length (mm): 2,500 Width (mm): 1,250
Request for a quoteGermany
Form: sheet Material: 1.4828 (X15CrNiSi20-12) Manufacturing method: cold-rolled, 2B Surface finish: pickled Norm: EN 10095 eClass 9.1: 35010511 UNSPSC 11.2: 30102505 Dimensions: Gauge (mm): 1 - 3 Length (mm): 2,000 - 3,000 Width (mm): 1,000 - 1,500
Request for a quoteGermany
Form: sheet Material: 1.4301 (X5CrNi18-10) Manufacturing method: hot-rolled, 1D Surface finish: ground Norm: EN 10088-2 Ground sites: on one side Grain: Grit 240 Dimensions: Gauge (mm): 10 Length (mm): 2,000 - 3,000 Width (mm): 1,000 - 1,500
Request for a quoteGermany
Form: sheet Material: 1.4462 (X2CrNiMoN22-5-3) Manufacturing method: cold-rolled, 2E Surface finish: mech. descaled Norm: EN 10088-2 eClass 9.1: 35010511 UNSPSC 11.2: 30102505 Dimensions: Gauge (mm): 2 - 3 Length (mm): 2,000 - 3,000 Width (mm): 1,000 - 1,500
Request for a quoteGermany
Form: sheet Material: 1.4016 (X6Cr17) Manufacturing method: cold-rolled, 2B Surface finish: pickled Norm: EN 10088-2 Dimensions: Thickness (mm): 3 - 4 Length (mm): 2,000 - 3,000 Width (mm): 1,000 - 1,500 Factory filming: no film, no paper
Request for a quoteGermany
Shape: sheet Material: 1.4301 (X5CrNi18-10) Type of production: cold-rolled, 2J Surface finish: brushed Ground sides: one-sided Standard: EN 10088-2 eClass 9.1: 35010511 UNSPSC 11.2: 30102505 Dimensions: Thickness (mm): 0.8 - 6 Length (mm): 2,000 - 3,000 Width (mm): 1,000 - 1,500 Foliation: Foil 4228, standard foil, laser protective foil
Request for a quoteGermany
Shape: sheet Material: 1.4301 (X5CrNi18-10) Type of manufacture: cold-rolled, 2G Surface finish: ground Standard: EN 10088-2 Grain: Grit 240 Ground sides: one-sided Dimensions: Thickness (mm): 0.6 - 8 Length (mm): 2,000 - 6,000 Width (mm): 1,000 - 2,000 Factory filming: Film 4228, Standard film, Laser protection film
Request for a quoteGermany
Form: sheet Material: 1.4301 (X5CrNi18-10) Manufacturing method: hot-rolled, 1D Surface finish: pickled Norm: EN 10088-2 eClass 9.1: 35010511 UNSPSC 11.2: 30102505 Dimensions: Thickness (mm): 3 - 12 Length (mm): 2,000 - 6,000 Width (mm): 1,000 - 2,000
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
Germany
Form: sheet Material: 1.4541 (X6CrNiTi18-10) Manufacturing method: cold-rolled, 2B Surface finish: cold-rolled pickled Norm: EN 10088 eClass 9.1: 35010511 UNSPSC 11.2: 30102505 Dimensions: Thickness (mm): 1 - 4 Length (mm): 2,000 - 3,000 Width (mm): 1,000 - 1,500
Request for a quoteGermany
Form: sheet Material: 1.4404 (X2CrNiMo17-12-2) Manufacturing method: hot-rolled, 1D Surface finish: pickled Norm: EN 10088-2 eClass 9.1: 35010511 UNSPSC 11.2: 30102505 Dimensions: Gauge (mm): 3 - 12 Length (mm): 2,000 - 4,000 Width (mm): 1,000 - 2,000
Request for a quoteGermany
Form: sheet Material: 1.4571 (X6CrNiMoTi17-12-2) Manufacturing method: hot-rolled, 1D Surface finish: pickled Norm: EN 10088-2 eClass 9.1: 35010511 UNSPSC 11.2: 30102505 Dimensions: Thickness (mm): 3 - 12 Length (mm): 2,000 - 4,000 Width (mm): 1,000 - 2,000
Request for a quoteGermany
Shape: sheet Material: 1.4301 (X5CrNi18-10) Type of manufacture: cold-rolled, 2G Surface finish: ground Standard: EN 10088-2 Grain: Grit 320 Ground sides: one-sided eClass 9.1: 35010511 UNSPSC 11.2: 30102505 Dimensions: Thickness (mm): 0.8 - 2 Length (mm): 2,000 - 3,000 Width (mm): 1,000 - 1,500
Request for a quoteGermany
Stamp mouldings for embossed or recessed stamping of aluminium or stainless steel sheets for the car industry. We produce the stamp mouldings in accordance with your data in soft or hard condition. Thanks to the high-quality structures, the movement between top and bottom dies is precisely coordinated. The design is based on your drawings or data.
Request for a quoteGermany
Sturdy and practical galvanized or stainless steel linear rails with radial ball bearing sliders. The X-Rail is a family of linear guides with radial ball bearing sliders for applications requiring cost efficiency and high resistance to corrosion. The shaped raceway rail, the flat raceway rail and the telescopic rail are available in stainless steel or galvanized sheet metal. With the T + U configuration, the X-Rail system can compensate for any axial misalignment in parallelism of the mounting surfaces. Three rail width sizes: 20mm, 30mm and 45mm Standard rail lengths up to 3,120mm; different lengths upon request Low coefficient of friction Combination of T and U rails for self-aligning bearing applications Easily adjustable slider preload Polymer based wipers available for added roller bearing protection (available on for the thin body style slider) High temperature resistance up to 120°C/250°F The stainless steel X-Rail linear guide version is corrosion resistant, and ensures...
Request for a quoteGermany
we process thin sheets, heavy plate, wear-resistant sheet and plate. aluminium sheets, stainless steel sheets, copper sheets, brass sheets and much more, with formates from 3000 to 8000 mm (118" to 315"), with thickness 1 mm – 180 mm (0,039" to 7") welded sheet metal structures, aluminium constructions, industrial profiles
Request for a quoteGermany
Niro Präzisionstechnik specializes in the manual mechanical processing of stainless steel thin sheets up to 4 mm. Our specialty are funnels, composite shapes, reductions and transitions, for example from round to square. All connections are welded while avoiding the inclusion of oxygen, and the weld seams are made invisible through careful polishing. The workpieces are machined free of tension and distortion with uniform wall thicknesses. We only process non-rusting materials such as V2A and V4A stainless steel, titanium alloys and aluminum. Our production conditions allow the manufacture of products for clean room applications such as those used in the pharmaceutical industry, medical technology and in the food industry. Suction devices Ring suction Downpipes Nozzles machine parts Assembly
Request for a quoteGermany
Niro Präzisionstechnik specializes in the manual mechanical processing and processing of thin stainless steel sheets up to 4 mm. Our specialty are funnels, composite shapes, reductions and transitions, for example from round to square. We only process non-rusting materials such as V2A and V4A stainless steel, titanium alloys and aluminum. Our production conditions allow the manufacture of products for clean room applications such as those used in the pharmaceutical industry, medical technology and in the food industry. Funnels and reducers from Ø 70 - 900 mm invisibly ground weld seams carefully smoothed transitions to avoid product buildup suitable for clean room applications uniform wall thicknesses free of tension and distortion
Request for a quoteGermany
Lipp offers liquid manure containers for farms of any size that not only make promises to provide safe and cost efficient storage but also keep those promises. Stainless steel may be the material of choice for constructing liquid manure containers but steel is expensive – and that is why Lipp uses Verinox, the material that it developed in house. A combination of galvanised steel sheet (for the outside of the container) and stainless steel sheet (for the inside of the container), Verinox offers all the benefits of a high quality material while enabling significant cost savings to be made at the same time. KEY BENEFITS Can be tailored to the customer’s requirements Steplessly variable in diameter and height On site production Construction without the need for container boarding or scaffolding Suitable for expansion High quality and a long service life Wide range of peripheral accessories Consistent quality worldwide
Request for a quoteGermany
The term metal bellows refers to a structure that is composed of one or more stainless steel sleeves fitted into one another and is rendered elastic by the introduction of parallel corrugations. Metal bellows can be arranged to complete combinations of metal bellows (expansion joints). Thus, every specific requirement can be met. As raw material for the sleeve production, stainless steel strips or sheets with a thickness of 0.15 - 3 mm in the standard grades are used: 1.4541 / AISI 321 1.4571 / AISI 316Ti 1.4404 / AISI 316L 1.4307 / AISI 304L material with high chemical resistance and temperature resistance: 1.4435 / AISI 316L 1.4539 / AL 904L 1.4878 / AISI 321H 1.4828 / AISI 309 1.4462 / AISI 318 LN 1.4410 / AISI F53 or additional special materials: 1.4876 / Incoloy 800HT 2.4858 / Incoloy 825 2.4856 / Inconel 625 2.4816 / Inconel 600 2.4610 / Hastelloy C-4 2.4819 / Hastelloy C-276 2.4602 / Hastelloy C-22 3.7035 / Tit
Request for a quoteResults for
Stainless steel sheets - Import exportNumber of results
133 ProductsCountries
Category