Transformer - Import export

Our mid range frequency converters are delivering up to 250 kW output at frequencies down to 4 kHz. For high frequencies up to 2 MHz we have our high frequency converter series HU.

Discover the outstanding properties of our high-quality transformer oil. Developed for demanding applications in transformers, converters, switches and capacitors, the transformer oil offers first-class performance and reliability. Manufactured in Germany by premium supplier.

Twopole and singlepole auxiliary voltage transformers designed to supply control cubicle with low voltage power.

The hermetic Transformer Protection Relay MCHD for hermetically sealed, liquid immersed distribution transformers without gaseous cushion in accordance with EN 50216-3. Each Hermetic-protection relay MCHD is individually tested for tightness and proper functioning.

Pressure relief devices for liquid-immersed transformers open in case of an internal fault and guarantee that the occured overpressure can properly release. Pressure relief devices close with decreasing pressure back to completely closed and leaktight position. Pressure relief devices for transformers can be installed in any position or inclination on the cover or the wall of a transformer. Upon request a transformer can be equipped with several pressure relief valves.

The magnetic oil level indicator 1 225 with vertical float movement is used for hermetically sealed transformers. The float movement is transmitted to the display by means of a magnetic clutch. This ensures that, in case of damage to the dome, no oil leakge of the transformer occures. The body is made of brass. The thread connection of the oil level indicator 1 225 is 1 ½".

The oil drain device Type C2 is used for oil sampling or emptying the transformer tank. The device is welded into the transformer case. The device is designed for use together with connection pipe F DIN 42551 for draining the transformer case for regeneration purpose of the oil. The oil drain device Type C2 is deisgned in accordance with EN 50216-4:2002 type C2.

Dehydrating breathers are being used for liquid immersed transformers in order to protect the insulating liquid and prevent the harmful moisture absorption from ambient air, which occurs when the load on the transformer fluctuates.The dehydrating breather removes practically all moisture from the air that flows through it into the conservator when the transformer is cooling down. This largely prevents any reduction of the dielectric strength and the formation of condensation in the expansion tank. Thus, the dehydrating breathers increases the operational safety of transformers.

The Buchholz Relay MBP in accordance with EN 50216-2 protects liquid immersed transformers and reactors with conservator. It will be mounted in the pipeline between transformer and conservator tank. The Buchholz Relay MBP operates as a protection device that can be provided with either two contacts or four contacts for alarm and tripping. Each Buchholzrelay is individually tested in a test facility for tightness and proper functioning.

In the fast-paced realm of business, innovation is the key to staying ahead. Our Research and Development (R&D) services are meticulously designed to propel your business into the future by seamlessly integrating Artificial Intelligence (AI), Internet of Things (IoT), and cutting-edge data analytics. Discover how our bespoke solutions can be the catalyst for a sustainable competitive advantage through digital transformation. In cooperation with our medium-sized international partner company, which employs the most brilliant minds, including graduates from Stanford and Princeton, we solve the most demanding mathematical challenges at the interfaces of physics, mathematics, mechanical engineering, IT, electronics, optics and artificial intelligence (AI). What makes us special are the interdisciplinary development teams, including IT specialists, engineers, mathematicians and physicists, who perform the most demanding contract development. Remuneration is purely performance-related.

Our range of transformers oil water coolers can be supplied in different mounting variants. The standard water cooler version is designed for direct mounting to the transformer tank. In addition, our range of products comprises free-standing transformer oil coolers designed to customer specifications. The coolers in general are used for specific types of transformers, such as furnace transformers or rectifier transformers. A further application is machine transformer cooling at hydraulic power plants. Transformer oil water coolers are available in different design versions.

Aral MegaTurboral LA 10W-40 is based on the strict requirements of the latest generation of Euro 4.5 and 6 engines with exhaust aftertreatment systems, for which a lubricant with a reduced content of sulfate ash, phosphorus and sulfur (Low SAPS) is prescribed, to ensure safe operation. The formulation enables a maximum reduction in exhaust emissions to comply with Euro 4.5 and 6 limits. Application Aral MegaTurboral LA 10W-40 was developed with special consideration of the requirement profiles for exhaust gas aftertreatment systems, especially when using diesel particle filters in commercial vehicles. Advantages Low SAPS technology optimizes the efficiency of the exhaust gas aftertreatment and thus ensures safe compliance with the legally prescribed Euro 4.5 and 6 limit values. Synthesis technology enables oil change intervals to be extended while taking into account the manufacturer's instructions and reduces maintenance costs and the resulting downtime.

Shell PurePlus Technology engine oil - the ultimate protection from Shell for vehicles with exhaust aftertreatment systems Shell Helix Ultra ECT C2/C3 works with Shell's innovative "Emissions Compatible Technology" to protect exhaust aftertreatment systems to keep diesel particulate filters clean and thus maintain full engine performance It reduces friction in the engine and thereby contributes to fuel savings. Specifications, approvals and recommendations ACEA C2, C3 API SN VW Standard 504.00, 507.00 MB approval 229.52, 229.51, 229.31 Fiat 9.55535-GS1 - meets the requirements, 9.55535-DS1* - meets the requirements Porsche C30 Not suitable for Fiat SDE 1.3L Euro 6 engines. With our Shell LubeMatch online service you can easily

The DC-voltage converters developed for the electronic components in the motor car are characterised by their ease of installation in every vehicle. The high degree of stability, the compact design, sustained short-circuit resistance as well as the high level of operating safety are the quality hallmarks of this series. The areas of application span the mobile employment of 12-V-consumers in vehicles with a 24-V-onboard network. The devices are particularly suitable for operating car radios, stereo units, radios, cooler units, car telephones, computers, 12-V-trailer lighting etc. The voltage converter converts an input direct voltage into an output direct voltage. The input voltage must be greater than the output voltage. No base load is required at the output end. A 26 kHz PWM switching controller is used for this purpose. Input and output are not isolated. The common earth is connected with the voltage converter housing.

i/p converter for the electrical control of pneumatic positioners. Suitable for field and switch cabinet assembly. Suitable for remote control of valves in hazardous areas. Also in Ex version II 2 G EEx ib IIC T6.

INGENERIC beamPROP The INGENERIC beamPROP is a lens array which matches the beam parameter product (BPP) of the fast and slow axis of high power diode laser arrays. The beamPROP is a key component for the fiber coupling of diode bars dense wavelength beam combining. Both applications make high demands on the components, which are met by INGENERIC’s outstanding manufacturing technology, guaranteeing highest levels of efficiency for diode lasers. Achieve the highest beam quality through the four major features behind the beamPROP: complete utilization of the aperture by minimized transition zones minimum aberrations achieved by highest level of precision and uniformity of single lenslets an exact rotation of the emitter is achieved through the defined center thickness accuracy minimum pointing errors due to an exact position of front and back surfaces

Hydraulic Inverters Pressure Transformers

✓ Ultra wide input range 6...36VDC ✓ Selectable output voltage +12V, +19V or +24V ✓ Very compact design 132mm x 56mm x 17mm ✓ Full performance in the extended temperature range of -20°...+60°C ✓ Very high efficiency up to 98% ✓ More than 10 years capacitor lifetime ✓ Optional output voltage compensation via sense lines ✓ Optional Remote On/Off ✓ Incl. thermal pad, jumper and distance bolts ✓ Made in Germany With 98% efficiency and 300W output power the powerful open frame DC/DC converter offers an ultra-wide 6-36 V input as well as three selectable output voltages 12V / 19V / 24 V, so that almost any corresponding single-voltage motherboard or computer system can be supplied. The very compact DC converter “Made in Germany” delivers fanless full power in the extended temperature range of -20°…+60°C and up to an operating altitude of 5000m.

Wipers for steel bars In the production of pipes and steel bars, socalled wipers are used for cleaning. The wipers have a round or rectangular outer profile and an inner profile that matches the shape of the object to be cleaned. Normally, several wipers are mounted in series, whereby the passthrough openings are smaller than the profile. The bar is pushed through the elastomer plates at high velocity, and the rubbery material strips the surface free from grease and cleaning fluid residues. It is the edge that counts! Just a like a car window wiper, it is the edge that counts. Normally, the wipers are stamped from sheet goods. During stamping, the elastomer becomes distorted; the inner edge is therefore not dimensionally stable and is at an angle. Only part of the edge wipes emulsions from the surfaces depends on the profiles. This edge is rapidly worn down; the cleaning action is then unsatisfactory. Streakfree cleaning

Funnels for pipes and bright steel In the production of pipes and bright steel socalled funnels are used for threading in the production plants. In most cases funnels made of polyamide are used, but due to the material hardness and the sharpedged pipe ends wear out very quickly. It depends on the material sphere As an alternative, secutex offers polyurethane funnels for this purpose. In contrast to polyamide, these are softer from the material and therefore also more wearresistant than sharpedged pipe ends. This means longer service life for the customer as well as better surface protection for very sensitive materials. For every size secutex funnels can be produced in the required dimensions according to customer drawings.

With securoll secutex offers a specially developed coating for cylinders and rolls, which is cast in form or applied directly onto the roller core. During product development the vast experience of secutex with all types of coatings was introduced. secutex supplies a wide selection of securoll for almost any application. Material hardnesses of 55°90° Shore are supplied. The innovative process ensures high precision in the coating with very low tolerances as well as optimum and longterm bonding between the cylinder/roller core and the securoll material. This ensures that the securollcoated cylinders and rollers have a a high degree of mechanical strength and wear resistance. What does securoll offer? High abrasion resistance Different Shore hardnesses Temperature resistance Low tolerances Different surfaces Special forms Coated cylinder and rollers Noisereducing Protects materials Long service life Resistant to hydrolysis

The compact collection is available as bridge, and half-wave rectifiers in two voltage variants. Two different housing variants allow mounting by screwing or snapping in.

The Regular Collection is available as bridge, half-wave, and bridge/half-wave rectifiers. The bridge/half-wave rectifiers reduce the output voltage after the brake is released. Depending on the selected rated coil voltage of the brake, either a faster switching by overexcitation, a reduction of the electrical power while the brake is released or a combination of both is possible.

These half-wave and bridge rectifiers are ideal for installation in the junction boxes of medium-power brake motors, brakes and solenoids. Accessories include flying leads and a range of mounting hardware so that installation on DIN rails is also possible. Encapsulated versions for an extended operating temperature range are available as options. In case of additional DC side fast turn-off, the induction voltage generated by inductive loads is limited within the rectifier.

The rectifier with built-in current sensor for fast turn-off is designed for the operation of electromagnetic devices. It ensures fast turn-on and turn-off. The rectifier with bridge circuit comprises a thyristor and timer. During overexcitation, the rectifier delivers bridge rectified output voltage before changing over to half-wave rectification. On the DC side, the output voltage is enabled by the built-in current sensor which measures the AC current of the connected motor. If the motor is stopped, the rectifier turns off on the DC side as soon as the current falls below the turn-off threshold. The turn-off voltage generated by the inductive load is limited. The rectifier is suitable for connection in parallel with AC motors. The current sensor must be wired into the motor current path in such a way that the current flow created when the motor operates in generator mode will not pass through the sensor. This is crucial to avoid delayed or impaired DC side switching.

Our range of transformer oil air coolers for forced oil cooling systems can be supplied in different mounting variants. The standard air cooler version is designed for direct mounting on the transformer tank. In addition, our range of products comprises free-standing transformer oil coolers designed to customer specifications. Transformer oil air coolers are available in different design versions.

Transformers with forced oil cooling systems require reliable, glandless transformer oil pumps. We offer a large range of such pumps, from which customers can choose a type that suits their specific requirements and ensures optimum operating conditions. Our oil circulation pumps are of simple, straightforward design and robust construction. Due to their compact size, the pumps can be easily integrated into the oil circuit. Four pump designs are available for different applications: Power Transformer Applications Inline and angle-type pumps with radial impellers and inline pumps with propeller-type impellers. Traction Transformer Applications Pumps with radial impellers for traction transformers in rail-mounted vehicles.

These overexcitation rectifiers are designed to increase the attractive force and reduce the attraction time of actuating solenoids, to shorten the coupling and disconnection times of clutches and brakes and to decrease the power consumption of clutches, brakes and actuating solenoids. To increase the attractive force, the solenoid is overexcited during the overexcitation time, applying bridge rectified voltage. Then the rectifier changes over to the selected holding voltage which must not exceed the rated voltage of the solenoid.

These compact half-wave and bridge rectifiers are ideal for installation in space restricted junction boxes of brake motors. They can be delivered with flying leads or terminals for connection. Various accessories are available to meet different installation requirements.