Screws - Import export

Hexagon nut with locking ring DIN-EN-ISO 10511 (old standard DIN 985) Strength class 8 Material: C1035 steel Coating: galvanized Sleeve: Nylon Thread: metric, normal, accuracy class - medium (6H) The main purpose is the fastening and connection of assemblies and parts together with bolts, screws and other fasteners in mechanical engineering and construction. The plastic ring prevents the nut from unscrewing spontaneously, and also ensures the tightness of the thread.

Hexagon nut, galvanized, DIN-EN-ISO 4032 (old DIN 934 standard) Strength class 8 Material: C1035 steel Coating: galvanized Thread: metric, normal, accuracy class - medium (6H) The main purpose is the fastening and connection of assemblies and parts together with bolts, screws and other fasteners in mechanical engineering and construction.

The main purpose is to fix the parts in a plastic dowel of the appropriate diameter or: in wood, with pre-drilling, using metric fasteners (for example, fixing pipe clamps). The carving is rare, single-pass for wood on one side and metric on the other. It has a hexagon between the metric and the screw thread for tightening the screw stud.

Thread: metric, Norman, accuracy class medium (6g) The wing screw is recommended for fastening and connecting assemblies and parts in mechanical engineering, construction: where fast and frequent disassembly of the mounting joint is required. The screw is equipped with "flaps" for tightening the unscrewing manually, which allows you to work without special tools.

Threaded stud, DIN 976 (old DIN 975 standard) 1meter / 2-meter length Material: C1008 steel Coating: galvanized Thread: metric, normal, accuracy class - medium (69) The stud is designed for mounting fasteners with metric threads. It is also possible to attach wooden logs, beams, boards, etc. To install a threaded stud, it is necessary fix the "collet" in the wall, cut off the hairpin of the required length and strengthen the material of the required thickness in accordance with the permissible load. The dimensions of the stud are determined by the thread size

Screw for furniture fittings KOMVI slot, hemispherical head, galvanized

Furniture bolt, DIN 603 Semicircular head, square headrest

Hexagon socket bolt, DIN-EN-ISO 4762 (old DIN 912 standard) Galvanized, strength class 8.8 Material: C1035 steel Coating: electroplating Thread: metric, normal, accuracy class - medium (6g) A bolt with a cylindrical head and a turnkey internal hexagon, complete and incomplete metric: thread.

Hexagon head bolt, DIN-EN-ISO 4017 (old DIN933 standard) Galvanized, strength class 8.8

Exhaust rivet Combined (galvanized steel / aluminum) The main purpose is an integral connection of sheet metals and other solid materials and structures. When installing rivets, access is required only on one side of the material. It can be open or closed, with a convex or countersunk head. Installation is carried out using a special tool. Material: body - aluminum, rivet rod - galvanized steel.

chains, cables, electric cables, lamps, suspended ceilings Design features: a steel rod with a cylindrical movable sleeve in the form of a belt, a cone-shaped shank and an eye with a hole with a diameter of 6.3 mm. When efforts reliable fixation. The ceiling anchor has dimensions: 6 x 60

Folding spring dowel with hook The main purpose is to attach lightweight structures to plasterboard, particle board, and other hollow building materials..

The main purpose is fast fastening in materials such as concrete, natural stone, solid brick of metal parts, profiles, slats, suspended ceilings, etc.

Hammered metal dowel-nail The main purpose is non- removable fastening of profiles and various thin-sheet materials to concrete, stone and brick. Through-mounting to a metal profile of the appropriate thickness is possible. Fast end-to-end installation. Material: dowel - zinc alloy; nail - C1008 steel, galvanized

The main purpose is to attach materials and equipment to concrete, natural stone, and brick. This is a simple and quick installation, namely: it is installed in a pre-drilled hole corresponding to the diameter and length of the anchor; it is wedged with a spacer cone when screwing into the anchor: a metal element (bolt, stud).

The main purpose is to attach heavy equipment to concrete, natural stone, and brick. End-to-end installation. The anchor is hammered into a pre-drilled hole in the attached material and concrete, and then tightened with a nut.

The main purpose is to attach heavy structures to concrete, building stone and brick. It can be used for mounting to thin concrete partitions. The recommended load should not exceed 25% of the maximum (pull-out load). The recommended load increases in proportion to the increase in concrete strength.

Anchor bolt with nut The main purpose is the installation of various structures (steel structures, barriers, fences, etc.) in solid materials. It consists of a sleeve, a stud with a cone at the end and a gasket nut.

Metal frame anchor The main purpose is to attach wooden, metal frames and wooden boxes to a concrete base, building stone, solid and hollow bricks. End-to-end installation. The anchor consists of a steel split sleeve, a screw with a PZ3 slot and a cone nut. The design of the anchor is made in such a way that it is wedged and fixed first in the base, then in the attached material.

Metal dowel for hollow structures The main purpose is to attach building materials to bases with low loadbearing capacity, for example: plasterboard, particle board or hollow materials. It is also used when frequent disassembly of the structure is necessary. Installation can be carried out in two ways: using special pliers, using a screwdriver.

Dowels with a nail for quick installation of OMAX Countersunk / cylindrical / mushroom-shaped side (assembled) The main purpose is to attach to concrete, solid materials, bricks with voids, foam concrete all kinds of wooden parts, including a plaster crate, frames, docking wall or plaster profiles, baseboards, wall corners, as well as cable ducts, cable clamps and pipes, sheet steel, etc. The OMACH nail dowel is simply hammered. The mount can be dismantled or loosened with a screwdriver.

Dowel for insulation materials with plastic/ metal nail The main purpose is to attach thermal insulation materials to concrete masonry. It is used for mounting on walls that are particularly exposed to the adverse effects of atmospheric conditions. Material: dowel - HDPE (low pressure polyethylene); nail - impact resistant polypropylene/galvanized metal Starting from a length of 140mm, it is recommended to use a metal nail. Per 1 sq . m . 4-5 dowels are recommended for mounting insulation. The dowel for insulating materials has a unique distinctive feature - on The inscription OMAH is stamped on the surface of the hat.

Driva dowel, plastic / metal with a drill bit The main purpose is installation in a plasterboard wall. With a drill bit, it is screwed in without pre-drilling. The design of the dowel prevents its spontaneous unscrewing and ensures fastening without straining. After installation , the material is attached to it with a screw. If necessary, it can be turned out of the wall.

The Butterfly dowel is mainly used for fastening lightweight structures in plasterboard and other thin-walled structures. Due to the special design, the dowel is blocked already at the moment of deposition. Full locking of the dowel is achieved by tightening it with a screw. It is very important to select the appropriate length of the screw, since the dowel is tightened with a screw from the end to the beginning. Material: HDPE (low pressure polyethylene) The butterfly dowel has a unique distinctive feature - the OMACH inscription is stamped on the side surface.