Condensers - Import export

Wide range capacity liquid cooled condensing units, designed for commercial and industrial applications with the cooling capacity from 10 kW to 40kW. These units work on a principle of the heat rejection loop, where condenser heat is dissipated to the environment via water. Rejected heat can be used for additional needs in the same building, which gives these facilities additional economic benefits. These units provide an economical, compact alternative to traditional air-cooled condensing units. Built on an open welded frame with standard profile, this condensing unit is also available in a double-deck construction for higher capacity. Assembled with shell and tube or plate heat exchanger, 1 to 4 scroll or reciprocating compressors and a liquid receiver as well as refrigerant filters and a sight glass. Safety valve and pressure switches are added to increase the security of the unit.

Small capacity condensing units with the cooling capacity from 15kW to 40kW. Designed on a compact frame, perfectly suitable for small commercial applications such as convenience stores, petrol forecourts, cold rooms and more. Assembled with copper aluminium fin condenser, Bitzer reciprocating compressors with crankcase heater and high efficiency AC/EC axial fans. Built in a closed steel frame with a polymer powder coating and condenser protection grid. Electric panel includes phase rotation and phase loss monitoring relay, compressor and fan motor overheat protection, contactor and main switch. Additional assembly options are available.

Small to medium capacity condensing units, designed for commercial and industrial applications such as food and beverage manufacturers, convenience stores, petrol forecourts and cold rooms. Assembled with reciprocating compressors the units provide a cooling capacity from 12kW to 55kW. These condensing units are an optimal choice for conventional refrigeration systems – affordable, small in size and easy to install. The units can be built outdoors, but additional shelter against rain or snow should be provided. Assembled with copper aluminium fin condenser, Bitzer or Copeland compressors with crankcase heater, high efficiency AC/EC axial fans and a liquid receiver. Built on an open welded galvanized steel frame with powder coating.

Wide range capacity liquid cooled condensing units, designed for commercial and industrial applications with the cooling capacity from10 kW to 40 kW. These units work on a principle of the heat rejection loop, where condenser heat is dissipated to the environment via water. Rejected heat can be used for additional needs in the same building, which gives these facilities additional economic benefits. These units provide an economical, compact alternative to traditional air-cooled condensing units. Built on an open welded frame with bent profile and powder coating, these condensing units carry a plate heat exchanger. Can be assembled with 1 to 4 reciprocating or scroll compressors with crankcase heater, a liquid receiver, refrigerant filters and a sight glass. Safety valve and pressure switches are added to increase the security of the unit.

Wide range capacity liquid cooled condensing units, designed for commercial and industrial applications with the cooling capacity from 10kW to 40kW. These units work on a principle of the heat rejection loop, where condenser heat is dissipated to the environment via water. Rejected heat can be used for additional needs in the same building, which gives these facilities additional economic benefits. These units provide an economical, compact alternative to traditional air-cooled condensing units. Built on an assembled frame with covers, this condensing unit can be designed in a variety of ways, depending on intended use. Collected with shell and tube or plate heat exchanger, 1 to 4 reciprocating or scroll compressors and a liquid receiver as well as refrigerant filters and a sight glass. Safety valve and pressure switches are added to increase the security of the unit. An additional 50 mm rock wool insulation can be supplemented for a super silent unit operation.

Refra heat exchangers for condensers are made of copper tubes and convert the system’s refrigerant gas to liquid form. Usually they are used for refrigeration equipment as a remote condenser or as a part of a condensing unit. Refra condenser coils are made using inner grooved or smooth copper tubes, which range from 5 mm to 12,7 mm in diameter. The frame can be made using aluminum, galvanized or stainless steel and can be coated with a special Aqua-Aero anti corrosion protection. Heat exchangers can be manufactured from low to high capacities to fully meet customer needs.

Wide range capacity air cooled condenser series, perfectly suitable for small and large refrigeration and air conditioning systems used in commercial or industrial buildings with low to high power demand. Due to its lightweight construction and practical weight distribution this product can be installed even on medium-strength rooftops. Available heat capacity is up to 800 kW under nominal conditions (when Tcond is 45°C, Tamb is 30°C and R1234ZE. Flat shaped simple construction, assembled with inner grooved copper tubes, aluminum or copper fins and AC or EC fan motor technology. The galvanized steel and powder coated frame can be designed in flat or vertical way.

Wide range capacity compressor packs with cooling capacity from 25 kW to 500 kW. Designed for commercial and industrial applications with large power demand. Reciprocating compressor packs are perfectly suitable for the cooling of large warehouse areas as well as other industrial buildings. The compressor pack can also be part of a larger refrigeration system. It is possible to choose the compressor pack for an existing condenser or purchase a compressor pack together with Refra condenser for convenience. Assembled in a special walk-in container, this unit is ideal for buildings where indoor installation is not possible. It can be placed outdoors – right next to the building, resulting in reduced installation costs and easy unit maintenance. Additional options, such as illumination, ventilation and heating can be integrated inside the container to make the service of the unit even more convenient. .

Wide capacity range air cooled condenser series, Created for small and large refrigeration or air conditioning systems used in commercial and industrial buildings with medium and high power demand. CV series units are ideal when high capacities are required in a limited installation space. This unit is Available heat capacity is up to 1,3 mW under nominal conditions (when Tcond is 45°C, Tamb is 30°C and R1234ZE. V shaped construction, assembled with inner grooved copper tubes, aluminum or copper fins and AC or EC fan motor technology. The galvanized steel and powder coated frame can be designed in various sizes.

Extensive capacity range air cooled condenser series created for large refrigeration and air conditioning systems. Four heat exchangers and double fan row provide immense heat capacity within limited placement area, making it perfect for saving space while still maintaining high power. This type of unit is perfectly suitable for commercial and industrial buildings with high power demand. Available heat capacity is up to 1,6 mW under nominal conditions (when Tcond is 45°C, Tamb is 30°C and R1234ZE. W shaped large construction, assembled with inner grooved copzer tubes, aluminum or copper fins and AC or EC fan motor technology. Galvanized steel and powder coated frame can be designed in various sizes. The clever frame design also allows for the installation of additional equipment under the condenser.