Monoblocs - Import export

General purpose external and internal type welded cabinets, Galvanized sheet body up to 3 mm Body reinforced with special twists High Protection class up to IP66 Strong structure produced with the latest welding technologies Epoxy-Polyester Powder Coating, Primer Painting for External Type applications, Zinc coating solutions against corrosion and oxidation PEM Driven Screw-Nut Applications Flexible cabling and Bus-Bar solutions Low voltage distribution panels in standard sizes, Wall-mounted distribution boxes External Type Device Boxes Machine control consoles Transformer Cabinets Project-based production in special sizes

#FURNITURE #SOFA #MODERNSOFA #CLASSICSOFA #AMRCHAIR #CHAIR

CDA’s E-Fill SW Monoblock is designed to deliver exceptional performance and adaptability to the fully automatic packaging line from which it originates. This SW version excels in the filling, screwing, and labelling of bottles (e-liquid, essential oils, flavours, dyes, reagents…) ranging from 5 to 250ml in various formats. It operates in two modes: Fully automatic mode for large product series, utilizing the Pick & Place system for automatic cap positioning and screw capping. "Switch" mode caters to small and medium product series, incorporating manual cap dispensing on the bottle and automatic screw capping. The switch mode facilitates the bottling of different product formats without complex handling or adjustments. Doors can be opened to allow an operator to manually dispense caps, which are then automatically capped on filled bottles by a specific automatic capper. With a speed of up to 3000 bottles/hour, the E-Fill SW can be equipped with up to 2 labelling stations.

The COMPACT 7-valve filling monobloc is a solution designed for small wineries producing prestigious wines. It can be equipped with a capper for crown caps and dedicated to bottling bottle-refermented craft beer. The central star positions 7 bottles under the taps, which are filled through the tank's descent. While these bottles are capped upon exit, one by one, another set of 7 bottles is positioned under the tank. The semi-annular filling tank made of stainless steel allows the use of nitrogen in the tank. Filling occurs through a slight pressure of inert gas, preventing the dispersion of volatile components. The conveyors are configured so that only one operator is needed. Production: up to 1,000 bph (bottles per hour).

Machine for distributing and smoothing sparkling wine capsules and applying body label, back label, and neck label on cylindrical glass bottles from 187ml to 150cl. The monobloc's production capacity is 800 b/h with complete packaging for sparkling wine, whereas for wine bottles with label and back label, it can reach up to 1,800 b/h. Features include: automatic distributor for the sparkling wine capsule with an inclined loading platform, double optical alignment of the capsule with the brand, pre-smoothing head for inserting the capsule and smoothing using a double pneumatic head, 3 self-adhesive stations driven by stepper motors, electronic board for label start signal, electronic adjustment of label positioning via a touch-screen display, speed adjustment via inverter, full stainless steel safety protections, selection auger for 75cl cylindrical glass bottle format, pulling head, and rectangular bottle collection plate.

For filling cylindrical jars with dense products, sealing with T.Off capsules composed of: Volumetric doser, equipped with a stainless steel AISI 316 rotary pump with an electric motor, dosing controlled and regulated via inverter and adjustable electronic pulse counter from a keyboard, suitable for food, heat-sanitizable; drip-proof nozzle with a two-way valve synchronized with the doser. Dispenser with magnetic orientator for metal capsules. Adjustable descent channel for different formats, capsule presence control device in the channel, alert buzzer for missing capsules. Pneumatic rotary screwdriver. Hot air capsule heater-sterilizer in the pre-closure position. Operations carried out on a star with jar loading from the chain. Machine to be integrated in the line. Configured for one cylindrical jar format and one T.Off capsule format. Production: 1200/h for 500g (honey, jams, etc.)

Initially designed for the e-liquid industry, the E-Fill is an ultra-compact filling, labelling, and screw-capping machine that exceeds the most stringent requirements for filling and labelling e-liquid bottles for e-cigarettes. Its versatility now allows adaptation to other industries such as food processing (flavours, oil, etc.) or cosmetics (cream, liquid soap, etc.) due to innovative features, including the handling of products ranging from 5mL to 1L with a maximum diameter of 90mm. Featuring a peristaltic pump system, the E-Fill enables a quick liquid change in less than 2 minutes without requiring pump cleaning. Additionally, it can be equipped with a volumetric pump, utilizing a flow meter or piston, depending on the viscosity of the product being filled. The comprehensive E-Fill packaging line can apply up to 2 labels and achieve a filling rate of up to 25 products per minute.

Steel clamped or monobloc rollers mounted on pre-lubricated and protected radial ball bearings.The externally threaded shaft protrudes from only one end of the tube.In belt conveyors, they are vertically mounted in pairs at the edges of the rubber matting, with the function of restricting any lateral slipping. They are installed on self-centring stations with the same function.The technical characteristics of Series 6 rollers are those of the relative base rollers.Other finishes, see page 30.

Steel rollers with jacket consisting of tube and bearing mounting head rigidly coupled by welding. They are mounted on pre-lubricated angular or radial ball bearings and protected with double labyrinth, triple labyrinth dust seals with additional watertight protection. Monobloc steel rollers are used in belt conveyors with medium, heavy or very heavy loads. The diagrams and tables on page 42 show the dimensional characteristics and maximum loads.Operating temperature:-10 ÷ +90 [°C].

Clamped or monobloc steel rollers mounted on pre-lubricated and protected radial ball bearings.The externally threaded axle protrudes from one end of the tube only. They are vertically mounted, with a guiding and sliding function, in gravity or motor-driven conveyors.The technical characteristics of Series 6 rollers are those of the relative base rollers.

Steel rollers with the jacket consisting of tube and bearing mounting head rigidly coupled by welding.Monobloc steel rollers are used in conveyors with medium, heavy or very heavy loads. Depending on their application, the rollers have specific shapes for connection to the structure. This need is particularly noticeable in the production of gravity and motor-driven conveyors.For the correct installation of steel idlers, refer to the “Fixing rollers to structures” section on page 11.For the correct installation of motor-driven rollers, refer to the “Fixing rollers to structures” section on page 68. The diagrams and Table 60 show the shapes of the ends of the axles envisaged in TECNORULLI production’s “Monobloc steel rollers” programme.On request, other forms of connections and rollers with hubs can be considered.

Monobloc rolling basket with wheels, with large capacity and high resistance. Available in two models: Bond 2 (with 2 fixed wheels) and Bond 4 (with 2 fixed wheels + 2 revolvings). Thanks to its vertical design it will easily adapt to narrow aisles. It features a flat bottom, which facilitates the placement of products. and its cleaning. Additionally, it has a hook to hang the handbag or delicate products. Ideal for supermarkets, hypermarkets, toy stores, sports stores, DIY, and garden centers. FEATURES: •Reference: BOND2: 1270 | BOND4: 1470 •Capacity: 70L •Dimensions: 44 x 37,5 x 89,5 cm •Staking: 10 baskets x 1,50m •Weight: BOND2: 2,02 kg | BOND4: 2,20 Kg •Recommended maximum load: 30 kg •Materials: high-quality polypropylene for the body and handle •Standard colors: BLUE PAN 2935U · GREEN RAL 6018 · RED PAN 187 · BLACK RAL 9004 · ORANGE RAL 2009 •Custom colors available •Optional screen printing and adhesives •RFID Compatible •Anti-theft systems available

Monobloc single-lever mixer tap "MARTE", with spout and lever cm. 30

The short flute developed at our request by the company DIAGER makes it possible to meet the constraints of asbestos sites and avoids gel drips on the operator during drilling in the roof. It is also a visual cue to avoid drilling too deep. SPECIFICATIONS • Solid carbide insert with selfcentering point • Pad angle 135° • 3 simultaneous contact points • The new propeller offers a double cut halfround and square • SDSplus compatible attachment

Movable brake Punch stop Remote control USE Suitable for the soft and light transport of whole grapes, destemmed, marc, lees, lees and loaded liquids. Pumping with the sole crushing of the pipe without any mechanical parts in contact with the product.

monobloc chair

MONOBLOC SWIVEL CHAIR

Aluminium heat exchanger in monobloc casting Heat output , 24 kW & 28 kW Compact esthetic design. Low pneumatic resistance High modulation range possible Low hydraulic resistance. Fully water cooled heat exchanger with round burner head Equipped with fiber coated, premix round – burner Also option for delivery as complete heat cell

Single-piece shopping basket with wheels, with large capacity and high resistance. Available in two models: Bond 2 (with 2 fixed wheels) and Bond 4 (with 2 fixed wheels + 2 revolvings). Thanks to its vertical design it will easily adapt to narrow aisles. It features a flat bottom, which facilitates the placement of products and the cleaning process of the basket, and a hook to hang the handbag or delicate products. Ideal for supermarkets, hypermarkets, toy stores, sports stores, DIY and garden centers. Reference: 1270 - 1470 Capacity: 70 liters Dimensions: 44 x 37.5 x 89.5 cm Weight: 2,20 Kg Standard colors: red, blue, black, orange, green

Illuminated mushroom button EFL2 / Ø40

Stainless Steel and Carbon Steel Monoblock Ball Valves Design Size : Varnasan Connection : EN 1092-1 Actuator Adaptation : ISO 5211 Technical Features Working Pressure : PN16, PN40 ops. Working Temperature : -300C / + 1800C Usage : Actuator connected and handle option Certificate CE0036, TS EN 10204 3.1 Option Firesafe, direkt actuated connection option, jacket coupling 1/2” ve 3/4” flanged, threaded Application Corrosive fluids (acid, base), pharmaceutical, food, chemical, plastic