Motor drivers - Import export

The NCV8452STT1G Motor Driver and Controller is a single output device specifically designed for automotive and AEC-Q100 compliant applications. This NMOS technology device has a surface mount mounting style and is built with a small footprint. It is designed to work with a voltage load between 5 V ~ 34 V, and its output current is rated to be 1 A. Features: - AEC-Q100 compliant - NMOS technology device - Surface mount mounting style - Operating temperature range of - 40 C - Unit weight of 0.006632 oz - Output current of 1 A - Maximum Voltage Load of 5 V ~ 34 V Applications: The NCV8452STT1G Motor Driver and Controller is ideal for general purpose applications including automotive, as it has the rated temperature range and current. It is also designed to work with a wide voltage range of 5V-34V and is AEC-Q100 compliant.

BORSIG has been manufacturing centrifugal compressors for process gases for almost 60 years. The BORSIG centrifugal compressor series comprises multistage integrally geared centrifugal compressors with up to 8 stages, with steam turbine, gas turbine or electric motor as driver with all auxiliary equipment (turnkey solutions) according to customer’s requirements. The compressors comply with the corresponding API design standards such as API 617 (chapter 3) and 672 (4th edition). The oil system is designed according to API 614 or manufacturer's standard. The development is based on the latest research results in fluid mechanics as well as in gear and bearing design.

Flat surface plane labeling machine can work for all kinds of objects with plane, flat surface, side surface or large curvature surface such as bags, paper, pouch, card, books, boxes, jar, cans, tray etc.Widely used in food, medicine, daily chemical, electronic, metal, plastics and other industries. It has optional date coding device, realize date coding on stickers. Features You Can Not Ignor: 1. It can label for any products with flat surface. More flexible arrangement for manufacturing schedule. 2. The labeling head convenient to adjust, the labeling speed is automatically synchronous with the conveyor belt speed to ensure precise labeling. 3. The speed of conveyor line, the speed of pressure belt and the speed of label output can be set and changed by the PLC human interface. 4. Use famous brand PLC, stepping or servo motor, driver, sensor, etc, good quality components’ configuration.

The ALLEGRO A3930KJPTR-T Motor Drivers and Controllers are designed to provide a reliable and efficient solution for controlling and driving motors in a wide range of applications. This device features a parallel surface mount design, allowing for easy installation and integration into existing systems. It is rated for operation over a temperature range of -40°C to 150°C (TA) and is housed in a 48-LQFP-EP (7x7) package. The device is powered by a 5.5 V to 50 V supply voltage and is capable of delivering up to 1.5 A of continuous output current. It also features a wide range of protection features, including over-current, over-voltage, and thermal protection. The A3930KJPTR-T is an ideal solution for motor control and driving applications that require reliable performance and efficient operation.

WATTSAN M1 2030 wide-format machine has a large working area of ​​2000×3000 mm with a slatted table top. The design includes a spindle with an ER-25 collet chuck and a power of 6 kW. An air cooling system and a built-in vacuum cleaner for collecting wood chips and dust are also available for an additional fee. The leadshine 860 stepper motor driver is responsible for moving the portal, the machine is controlled by the operator through NcStudio. The body of the machine is a welded structure made of steel profile, the weight of the machine is 1400 kg. The maximum travel speed along the axes is 25 000 mm/min, the maximum travel speed during operation is 15 000 mm/min. The spindle speed reaches 24 000 rpm. If you want a more upgraded machine, we can install: Vacuum table. DSP controller. Syntec control system. chip removal system. manual auto lubrication. more powerful spindle or additional cutting heads. rotary device for processing cylindrical products. tool sensor.

"Our ride-on car is the perfect first mode of transport for little explorers. Its bright colors and friendly design will captivate the hearts of children. Young researchers can open the car hood, pretend to repair it, and store their treasures in the trunk under the seat cover. By propelling themselves forward with their own legs, children will develop essential motor skills. Aspiring drivers will delight in the easy control of the steering wheel, ensuring a joyful riding experience."

Fanuc automation components are used in various different production plants.

Mitsubishi Industrial Automation Components which can be used for various different production plants.

Yaskawa motors,drivers,PLC and I/O boards are used in various different industries in order to maintain continous production.

Siemens drivers,PLC,motors,I/O boards are available as brand new or refurbished. 6SN1118-0AE11-0AA1 6SN1118-0DJ23-0AA1 6SN1122-0BA11-0AA1 6SN1123-1AB00-0BA1 6SN1123-1AA00-0CA1 6SN1123-1AA00-0BA0 6SN1145-1AA01-0AA1 6SN1111-0AB00-0AA0 6SN1118-1NH01-0AA0 6SN1118-0DM11-0AA1 6SN1130-1DB13-0BA0 6SN1118-0DH12-0AA0 6SN1118-0DM11-0AA0 6SN1118-0AA11-0AA0 6SN1114-0AA01-0AA0 6SN1114-0NB01-0AA0 6SN1123-1AB00-0CA2 6SN1118-0AA11-0AA1 6SN1118-0AE11-0AA0 6SN1111-0AA01-0BA2 6SN1113-1AB01-0BA1 6SN1114-0NB00-0AA2 6SN1118-0NK01-0AA1 6SE6400-0PA00-0AA0 6SE6400-2FA00-6AD0 6SE6400-3CC00-4AD3 6SE6400-3CC01-0BD3 6SE6400-3TC03-2CD3 6SE6400-4BC05-0AA0 6SE6420-2UC13-7AA1 6SE1207-2AB03 6SE3111-5CA40 6SE3190-0XX87-8BF0 6SE3211-1DA40 6SE3211-5BA40 6SE3213-6BA40 6SE3213-6CA40 6SE3215-2BB40 6SE3290-0XX87-8PB0 6SE6400-3CC00-2AD0 6SE6401-1DF00-0AA0 6SE7016-1TA20 6SE7016-1TA31 6SE7016-1TA

Application Motors as driver used for a reciprocating compressor for gas compression in a refinery process.

Application Motors as driver for wind power nacelles.

Our compact asynchronous motors are distinguished by high torques in combination with a small size. They are highly dynamic with a low inertial moment, with a proven design as well as electromagnetically compatible for optimal, compact performance levels. We develop our compact asynchronous motors specially as speed-controlled drivers and for a supply from frequency converters. They also consist of a flexible platform system and can be adapted to specific customer requirements. The housing is angular and jacketless. Being ventilated by a separately driven fan, the motors can constantly deliver the full torque over the entire speed range. The optimised control behaviour with converter operation means that these machines can replace DC machines.

The SMD‑4.2DIN ver.2 driver is designed to control two and four-phase hybrid stepper motors with a phase current of up to 4.2A. The unit provides for mounting on a DIN rail, which is convenient for placing it in a production environment. Due to its advanced design, the SMD‑4.2DIN ver.2 delivers dynamics that accelerate the stepper motor to over 1000 rpm in a fraction of a second and easily reach operating speeds of over 4000 rpm while maintaining enough torque to perform useful work For stepper motor operation with high inertia load, a connector is provided for connecting an external braking resistor. The SMD‑4.2DIN ver.2 driver provides both pulse position control and analog speed or angle control. Microstepping mode - 1, 1/2, 1/4,1/8, 1/16, 1/32, 1/64, 1/128 Control methods: - Pulse position control (STEP/DIR) - Analog speed control (0 ‑ 5 VDC or potentiometer) - Analog control of rotation angle - tracking mode (0 ‑ 5 VDC or potentiometer) - Constant speed rotation

SMD-2.8DIN is stepper driver for small and medium size stepper motors with current per phase up to 2.8A. Driver provide smooth operation, maximum microstepping division is 1/256. Standard logic signals STEP and DIR are used for motion control. Enable signal is also provided and it can be inverted if it is required by a system. Driver SMD-2.8DIN operate with external logic signals source – frequency generator, PLC and etc. The drivers are designed on a modern element base with the use of new engineering solutions, which allow to achieve high speeds while maintaining useful torque. The microstepping division up to 1/256 provides exceptional smoothness and accuracy of positioning, and the output signal FAULT allows monitoring emergency situations that can arise during operation. Additionally, SMD-2.8DIN have the STO function (Safe Torque Off) - which provides motor phases deenergizing in case of any alarm situation.

Technicial Specifications 1. Origin: Italy 2. Revision year: 2020 3.Machine cylinder quantity: 4 Pieces 4. Cylinder dimensions: 335x1000 mm 5. Bearings: Bronze 6.Cylinder on / off: Manual 7. Motor power: 45 kW 8.Cooling system: Watering, cooling from the core 9. Engine-gearbox transmission type: Direct coupled 10. Transmission between shaft transmission type: Flywheel gear 11. Arrangement of mills: L-type 12. Friction ratio: 1: 1: 1 13. Optional: - motor driver - Rubber feeding unit - Cloth feeding unit - Hooded cooler - Winder unit - Packaged nylon coating unit

Technicial Specifications 1. Year of construction: 2006 2. Revision Year: 2020 3.Cylinder diameter: 660 mm 4. Roller length: 2135 mm 5. Front roller speed: 13 rev / min 6.Friction ratio: 1 - 1.22 7.Cylinder opening range: 1-15 mm 8.Motor power: 280 kW 9. Reducer: Jahnel 450 kW 10. Engine-gearbox transmission type: Direct coupled 11. Transmission type between gearbox and mills: Direct coupled 12. Bearings: Bronze 13. Lubrication: Automatic 14. Cooling system: Central cooled with rotary joint 15. Visor: Fixed 16. Security: - 4 emergency stop buttons - 2 emergency stop bars - 2 emergency stop pedals - Return - Engine brake 17. New chassis 18. Mills grinded 19. New electrical and control panel 20. Optional: - Stock blender - Auto turn on / off - motor driver *** All pictures are before revision

RAIL AND ON-RAIL HANDLING SPECIALIST TURNTABLES We manufacture all types of turntables for all load they could be manual or motor driver Useful load : from 5 T to 300 T Useful diameter : from 1 m to 10 m

Product comes with 500 watt Arel AC Monophase Spindle with manual and computerized control. Working area is 340x360x126(mm). The frame is made of aluminum and the device can cut pieces up to 240x360x115 (mm) with precision and without any displacement. All types of wood, plastics (ex: POM.), soft metals (ex: aluminum), hard metals (ex: iron, brass) can be processed. Product is suitable for PCB milling. Axis precision is 0.03mm. Spindle bit holder is ER-16. X and Y axis speed is 2400mm/min and Z axis is 1200mm/min. Linear movement is done by three nema 23 step motor. Step motors are controlled by TB6600 drivers with 24volt PS. Control card is MKS DLC. V2.1. Raptorex Pro requires computer connection to operate and is compatible with both open source and paid software. Product works with GRBL codes. Net weight is 39kg. Our device works silent and does not create vibrations. You may use our device on most regular tables. Product comes ready to operate, you may plug in and start operating.

Product comes with brushless 48V DC spindle with manual control. Working area is 340x240x126(mm). The frame is made of aluminum and the device can cut pieces up to 240x240x65 (mm) with precision and without any displacement. All types of wood, plastics (ex: POM.), soft metals (ex: aluminum) can be processed. Product is suitable for PCB milling. Axis precision is 0.07mm. Spindle bit holder is ER-11. X and Y axis speed is 800mm/min and Z axis is 600mm/min. Linear movement is done by three nema 17 step motor. Step motors are controlled by TB6600 drivers. Control card is MKS DLC. V2.1. Raptorex Mini requires computer connection to operate and is compatible with both open source and paid software. Product works with GRBL codes. Net weight is 23kg. Our device works silent and does not create vibrations. You may use our device on most regular tables. Product comes ready to operate, you may plug in and start operating.

Precision depositing automatic weight adjustment (+/- 0,005) Piston drivers : Servo motor Control : PLC Touchscreen control panel Depositing speed : 8-10 moulds/min. for 2500kg blocks 4-5 moulds/min. for 5000kg blocks Capacity : 1200-1500 Kg/Hour Mould Dimensions : 400x300x50 mm Loose Mould System(without mould break) De-moulding : With Robot (product output direction and angle adjustable) Cooling Capacity : 90.000 kcal/hour Cooling Tunnel : Tower type cooling Couverture Moulding Line (KDH – 750) Precision depositing automatic weight adjustment (+/- 0,005) Piston drivers : Servo motor Control : PLC Touchscreen control panel Depositing speed : 4-5 moulds/min. for 2500kg blocks 2-3 moulds/min. for 5000kg blocks Capacity : 600-750 Kg/Hour Mould Dimensions : 400x300x50 mm Loose Mould System(without mould break) De-moulding : With Robot (product output direction and angle adjustable) Cooling Capacity : 45.

PL Control Ltd has successfully marketed various automation components widely used in the industry, and our experience in the drive and control equipment market has shown that the price -quality ratio is one of the most important in making specific decisions in automation. Our products are optimum in terms of opportunity, with reasonable prices, representing an excellent alternative to the products offered by other leaders in the industry.

The machines of the s191H series are suitable for turning, milling and grinding of individual parts or from bar (diameters 32, 50 and 65 mm) in a single setting. The series has an extremely versatile modular structure, which means that it is possible to build any kind of machines from standardised modules for various machining tasks – including a machining center with seven axes and three spindles. The CNC Bumotec s191H Linear turnmill center is suitable for complete machining of very complex six sided parts. Linear motors ensure maximum precision and reliable repeatability in the machining of parts. Thanks to the combination of the rapid linear drive (acceleration 1.1 g; speed 50 m/min) with a highresolution Renishaw measurement